ANKO 43277223 User manual

Brand
ANKO
Model
43277223
Type
User manual

The ANKO 43277223 wireless charging pad offers a convenient way to power up your compatible devices without the hassle of cables. With its sleek and compact design, this charging pad can easily blend into any room or office setup. It features a non-slip surface to keep your phone securely in place while charging.

Using the included USB-A to USB-C cable, you can connect the charging pad to a power source, such as a wall outlet or a laptop. Once connected, the LED indicator light will illuminate, indicating that the pad is ready to use. Simply place your compatible phone on the charging pad, and the charging process will begin automatically.

The ANKO 43277223 wireless charging pad offers a convenient way to power up your compatible devices without the hassle of cables. With its sleek and compact design, this charging pad can easily blend into any room or office setup. It features a non-slip surface to keep your phone securely in place while charging.

Using the included USB-A to USB-C cable, you can connect the charging pad to a power source, such as a wall outlet or a laptop. Once connected, the LED indicator light will illuminate, indicating that the pad is ready to use. Simply place your compatible phone on the charging pad, and the charging process will begin automatically.

C
WP18
内容更改、补充场景图
WP18-M4418C
80mm
120mm
尺寸：80x120mm
材料：80g书写纸
颜色：双面单色印刷
工艺：不用折
备注：青色裁切线不要印刷出来
正面 背面
Wireless Charging Pad
User Manual
43277223
Includes:
>Charging Pad
>1M USB-A TO USB-C Cable
> User Manual
Warning:
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in materials and
workmanship for the period stated above, from the date of purchase, provided that the
product is used in accordance with accompanying recommendations or instructions
where provided. This warranty is in addition to your rights under the Australian
Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where possible)
for this product if it becomes defective within the warranty period. Kmart will bear the
reasonable expense of claiming the warranty. This warranty will no longer apply
where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service
Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or alternatively,
via Customer Help at Kmart.com.au for any difficulties with your product. Warranty
claims and claims for expense incurred in returning this product can be addressed to
our Customer Service Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights observed
under New Zealand legislation.
1. Do not disassemble or throw into fire or water.
2. Do not use wireless charger in severely hot, humid or corrosive environments.
3. Do not place the product near any kind of magnet or expose it to excessive vibration.
4. Please keep the distance at least 30cm between implantable medical devices
(pacemakers, implantable cochlear, etc.) and the wireless charger, to avoid potential
interference with the medical device.
5. Not intended for use by children. Ensure children are supervised if present around the
device.
2023-04-04
2023-03-06
内容更改 2023-04-04
The wireless charging efficiency may be affected by some phone cases.
Make sure there is no metal foreign object between the charging pad and phone
case when charging.
Specification:
Input:USB-C 5V 3A, 9V 2.5A
Wireless Output: 5W/7.5W(iPhone)/10W
USB-C Output: 5V 1.5A
Total Maximum Output: 17.5W
Charging distance: ≤5mm
Operation:
1. Connect the wireless charger to an outlet with an approved AC adapter (not included), and
the LED lights on.
2. To ensure efficient charging, a 2A higher output wall charger is requried.
3. Place your phone on the charging plate to start charging.
4. Foreign Object Detection function (FOD) : When metal objects such as COINS and
keys are placed on the coil of the product in standby state, the product will enter the
foreign body detection and turn off.
LED Color indication:
> Power On/ Standby: Green
>Led light changes to blue when charging starts
>Light blinks when error is detected
深圳市创世达实业股份有限公司
  • Page 1 1

ANKO 43277223 User manual

Brand
ANKO
Model
43277223
Type
User manual

The ANKO 43277223 wireless charging pad offers a convenient way to power up your compatible devices without the hassle of cables. With its sleek and compact design, this charging pad can easily blend into any room or office setup. It features a non-slip surface to keep your phone securely in place while charging.

Using the included USB-A to USB-C cable, you can connect the charging pad to a power source, such as a wall outlet or a laptop. Once connected, the LED indicator light will illuminate, indicating that the pad is ready to use. Simply place your compatible phone on the charging pad, and the charging process will begin automatically.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents