2. Eurolux
  3. D69

Eurolux D69, D74 Owner's manual

  • Hello! I have analyzed the user manual for the Eurolux CNC downlight range, including models D69, D70, D71, D72, D73 and D74. This manual provides important installation guidelines, safety instructions, and maintenance information. Feel free to ask me any questions about the features, specifications, or proper usage as outlined in the document.
  • What type of lamp is required for these downlights?
    Are these downlights suitable for outdoor use?
    What is the IP rating for these downlights?
CNC Downlight Range
Excluding: 1 x GU5.3 Maximum 50W MR16 12V
ILLUSTRATIONS
MODEL
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products
showing this marking must not be disposed of with other household or commercial waste.
To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate any such products from other waste types and recycle it
responsibly at your local facilities.
D69 / D70 / D71 / D72 / D73 / D74
PRODUCT CODE
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Please read instructions before commencing installation and retain for
future reference.
50mm
200mm
0.5m
D71
1x Ø70mm
D69, D70
1x Ø67mm
D72, D73,D74
1x Ø80mm
2
5
3
50mm
200mm
0.5m
D71
1x Ø70mm
D69, D70
1x Ø67mm
D72, D73,D74
1x Ø80mm
2
5
3
D71
D72 D73
D70D69
D74
2
5
3
D69, D70, D71, D72, D73, D74
•Fitting: CNC cut Aluminium.
•Lamp type: 1 x GU5.3 Maximum 50W MR16 12V
•Voltage: 12V ~ 50Hz.
•Protection against electric shock: Class 3. Requires earthing.
•IP Rating: IP20. Protected against solid foreign objects of 12.5mm Ø and greater.
•Commercial/domesticuse.
•Notsuitableforoutdooruse.
•ExcludingTransformer-(Euroluxcode:CO76orCO79)
•Maximum Ambient temperature range: 20ºC - 40ºC.
D72
•Dimensions:
 (Ø)90mmx(D)32mm
•Cut-out:(Ø)80mm
D70
•Dimensions:
 (L)80mmx(W)80x(D)28mm
•Cut-out:(Ø)67mm
D74
•Dimensions:
 (L)95mmx(W)95x(D)26mm
•Cut-out:(Ø)80mm
D69
•Dimensions:
 (Ø)80mmx(D)28mm
•Cut-out:(Ø)67mm
D73
•Dimensions:
 (L)90mmx(W)90mmx(D)32mm
•Cut-out:(Ø)80mm
D71
•Dimensions:
 (Ø)82mmx(D)23mm
•Cut-out:(Ø)70mm
SPECIFICATIONS
D69, D70, D71, D72, D73, D74 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusively
replacedbythemanufacturerorhisserviceagentorasimilarqualiedpersoninorderto
avoid a hazard. To ensure that you get maximum longevity and maximum use out of your
luminaire, please observe the following safety instructions.
Electrical products can cause death, injury, or damage to property.
  Installationoftheluminairemustbecarriedoutbyaqualiedelectrician,inaccordance
  withSANS10142.Oncompletionofinstallation,ensurethattheCerticateof
Compliance is updated.
•Beforeconnectingtheluminaire,ensurethatvoltageindicatedontheratinglabel
corresponds with the mains voltage in your home.
•Whenchangingthelamp,ensurethatthepoweristurnedoff.
•Ensurethatthecorrectlamptypeandwattageistted.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsand
safety requirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
IMPORTANT SAFEGUARDS
Before installation always ensure the power supply is turned off.
1. Cut a hole in the ceiling as per “cut out”.
2. Connect to electrical supply.
3. Hold both clips on either side of downlight upwards and insert downlight into ceiling hole
ensuring the mains lead is not trapped.
4.Pushttingupwardstosnaprmlyintoposition,ushwithceiling.
5. Insert the lamp by locating the pin connection holes within the lamp holder, gently pushing
the lamp into the holder and twisting into place.
6. Reconnect power.
NOTE: Alwaysallowthelamptocoolsufcientlybeforechanging.
NOTE: To avoid heat transfer from downlight, allow a minimum gap of about 200mm in
height from downlight to ceiling / any materials above the downlight and 50mm all
 aroundthesidesofthedownlight.Failuretodosocouldresultinre.
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthettingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Useasoftclothtoclean.
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,I.E.Usingsiliconsealersorincorrectcabling,willinvalidate
your warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.
The luminaire must not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliable
before installation.
•Ifyourmainswiringdiffersinanywayfromdiagram,consultaqualiedelectrician.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Alwaysreplacethelampwithoneofanidenticalratingandwattage.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsof
this product whilst it is connected to the electrical supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
/