Dometic AE Systems One and Two Step Awning Stand Off Bracket Kit 3108710.199 Installation guide

  • Hello! I've reviewed the installation instructions for the Dometic Awning Stand Off Bracket 3108710.199. This document provides step-by-step guidance on how to correctly install the brackets and foam spacers for proper spacing. It highlights the use of standoff brackets behind the mounting brackets and placement of the foam spacers. I'm ready to help with any questions you might have about the installation process or the included parts.
  • What is the purpose of this kit?
    How many foam spacers are included?
    Where are the foam spacers placed?
REVISION
Form No. 3109783.013 1/02
(replaces 3109783.005)
©2002 Dometic Corporation
LaGrange, IN 46761
Installation Instructions
Kit, One & Two Step Awning Stand Off Bracket
Part No. 3108710.199
This Kit Contains:
2 - 3109730.006 Top 1/2" standoff bracket
2 - 3109506.109 Bottom 1/2" standoff bracket
6 - 3108708.094 1/2" Foam Spacer
1 - 3109783.005 Installation Instructions
Important: Read and understand all of the following
steps before beginning installation.
This kit will properly space the hardware 1/2" away from the
sidewall when clearance is needed for trim, windows, etc.
Follow the Installation Instructions provided with the hard-
ware and add the following steps for stand off bracket instal-
lation.
1. Before installing hardware, place the 6 self adhesive
styrofoam spacers on back channel as shown in FIG. 1.
Place middle spacer directly behind strut bracket. If win-
dows or other items do not allow positioning as shown,
place middle spacer as close as possible.
2. While installing the top mounting bracket, place one
standoff bracket behind the top mounting bracket as
shown in FIG. 1. Repeat for other side.
3. The two additional stand off brackets will be put into po-
sition prior to installing the bottom mounting brackets.
See FIG. 1.
FIG. 1
Standoff
Bracket
Foam Spacers
Back
Channel
Strut
Bracket
Standoff
Bracket
/