Rayvenlighting RF01 User manual

Category
Network antennas
Type
User manual

Rayvenlighting RF01 is a remote-controlled UV disinfection lamp that can be used in various settings to eliminate harmful microorganisms. With its compact design and easy-to-use interface, this device offers a convenient and effective way to disinfect surfaces and objects. Simply plug it in, select a time setting, and let the UV lamp do the rest. Whether you're using it at home, in the office, or in a healthcare facility, the Rayvenlighting RF01 is a reliable solution for ensuring a cleaner and safer environment.

Rayvenlighting RF01 is a remote-controlled UV disinfection lamp that can be used in various settings to eliminate harmful microorganisms. With its compact design and easy-to-use interface, this device offers a convenient and effective way to disinfect surfaces and objects. Simply plug it in, select a time setting, and let the UV lamp do the rest. Whether you're using it at home, in the office, or in a healthcare facility, the Rayvenlighting RF01 is a reliable solution for ensuring a cleaner and safer environment.

Remote Controller User Manual
Product information
1. Product Name: Remote Controller
2. Product Code: RF-01
Remote Control Operation:
1. Close all the doors and windows.
2. Plug-in & Power on.
3. Press the button ON/OFF on the remote controller.
4. Select time setting 15min/30min/45min/60min on the remote controller
5. The UV lamp will turn on after 10 seconds delay when disinfection time is set.
Caution:
This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the
user’s authority to operate the equipment.
This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below
with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use
with this device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 5mm between the radiator and your body.
  • Page 1 1

Rayvenlighting RF01 User manual

Category
Network antennas
Type
User manual

Rayvenlighting RF01 is a remote-controlled UV disinfection lamp that can be used in various settings to eliminate harmful microorganisms. With its compact design and easy-to-use interface, this device offers a convenient and effective way to disinfect surfaces and objects. Simply plug it in, select a time setting, and let the UV lamp do the rest. Whether you're using it at home, in the office, or in a healthcare facility, the Rayvenlighting RF01 is a reliable solution for ensuring a cleaner and safer environment.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI