Spectrum Industries 37347B, 37360WHB, 37361B, 373B Metal Insert, Esports Metal Leg Panel Inserts Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Spectrum Industries 37347B Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly InstructionsAssembly Instructions
0192112 Page 1 of 1
Assembly InstructionsAssembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts
or accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2020 Spectrum Industries Inc., All rights reserved.
Metal Leg Panel Inserts - 37347Metal Leg Panel Inserts - 37347
for Esports Desksfor Esports Desks
(8) 0100167
8-32 x 1/2” PH
Thread cutting
(2) 0156610
Metal leg panel
assembly Note: Do not tighten fasteners completely until all have been installed.
Keeping them loose will help with alignment during assembly.
Figure 1
Metal leg panel
assembly
8-32 x 1/2” PH
Thrd ctg
(4 per panel)
Attach leg panel insertAttach leg panel insert
1. The upper rear screw is shared with the cord channel. If
installing onto an existing desk, remove the existing cord channel
mounting screw.
2. Attach the panel to the inside of each leg with (4) 8-32 x 1/2” PH
Thread cutting screws. Figure 1.
Leg
/