LifeSpan WORKPLACE AS3000 AirSoft Balance Board User manual

  • Hello! I've reviewed the user manual for the AirSoft Balance Board. This document provides instructions on how to adjust the ball positions for active standing or balance training via ball removal and repositioning, as well as how to customize the ball bounce using the included pump. I'm ready to answer your questions about setting up or using your AirSoft Balance Board.
  • What are the initial ball positions when the board ships?
    How do I reposition a ball?
    How to customize the amount of bounce in the balls?
Ball Removal
Ball Re-Positioning
www.LifeSpanFitness.com
Ball Pump
You can customize the
amount of bounce in the
balls of your balance board for
your desired feel. Pump more air
into the ball for more stability and
bounce, or remove some air for a softer
eect as you shift around on your board.
AirSoft Balance Board
Screw needle into base of pump
Share with us how you stay active! #myLifeSpan
The AirSoft™ board ships with the balls located in the Active Standing position. If you prefer, the balls can be
adjusted to a more challenging Balance Training position.
Balance
Training
Active
Standing
CONFIGURATIONS
When you kneel down to reposition a ball place one of your feet
on the board to give it stability while you work.
With a screwdriver remove the 3 screws on base of the ball frame.
Relocate the ball and frame to new location
on your balance board and re-attach with the 3 screws.
/