Features
•
Metal construction
•
One-piece, self-contained ceramic disc valve allows
both volume and temperature control
•
Temperature memory allows faucet to be turned on
and off at any temperature setting
•
High-temperature limit setting for added safety
•
Touch control for stream-to-spray water flow
•
Integral pullout sprayhead with retractable hose
•
Integral vacuum breaker
•
Flexible supplies
•
Meets CalGreen requirements for kitchen faucets
•
Available with a 9-1/2″ (241 mm) or 7-1/2″ (191 mm)
swing spout reach
•
Includes 10-1/2″ (267 mm) escutcheon and
2-1/2″ (64 mm) diameter escutcheon
•
1.8 gallons (6.8 L) per minute maximum flow rate at
60 psi (4.1 bar)
Codes/Standards Applicable
Specified model meets or exceeds the following at date of
manufacture:
•
ADA
•
ASME A112.18.1/CSA B125.1
•
ICC/ANSI A117.1
•
NSF 61
•
Energy Policy Act of 1992
•
All applicable US Federal and State material
regulations
PULL-DOWN KITCHEN SINK FAUCET
K-690
ALSO K-691
Colors/Finishes
•
CP: Polished Chrome
•
BN: Brushed Nickel
•
Other: Refer to Price Book for additional colors/finishes
Accessories
•
NA: None applicable
Specified Model
Model Description Colors/Finishes
K-690 Pull-down kitchen sink faucet – with 9-1/2″ (241 mm) swing spout reach ❑ CP ❑ BN ❑ Other ___
K-691 Pull-down kitchen sink faucet – with 7-1/2″ (191 mm) swing spout reach,
secondary
❑ CP ❑ BN ❑ Other ___
Product Specification
The single-control pull-down spray kitchen sink faucet shall be of metal construction. Product shall have a maximum flow rate
of 1.8 gallons (6.8 L) per minute at 60 psi (4.1 bar). Product shall meet CalGreen requirements for kitchen faucets. Product shall
feature a one-piece, self-contained ceramic disc valve, which allows both volume and temperature control. Product shall feature
temperature memory, allowing the faucet to be turned on and off at any temperature setting. Product shall feature
high-temperature limit setting for added safety and flexible supplies. Product shall feature a touch-control stream-to-spray,
integral pullout sprayhead and hose, and integral vacuum breaker. Product shall be available with a 9-1/2″ (241 mm) or 7-1/2″
(191 mm) swing spout reach. Product shall include a 10-1/2″ (267 mm) escutcheon and 2-1/2″ (64 mm) diameter escutcheon.
Faucet shall be Kohler Model K-____-____.
VINNATA
®
Page 1 of 2
1013943-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Optional Accessories
1012715 Deep rough-in kit
Requires 1-7/16″ (37 mm) to 1-1/2″ (38 mm) diameter hole to accommodate 1-3/8″ (35 mm)
to 3-3/8″ (86 mm) thick installations.
❑ NA
1179913 Low flow kit – Reduces maximum flow to 1.5 gpm (5.7 L) at 60 psi (4.1 bar) ❑ NA
Installation Notes
Install this product according to the installation guide.
Meets all local plumbing codes for backflow prevention
requirements.
ADA, ICC/ANSI A117.1 compliant when installed to the
specific requirements of the regulation.
Ø 1-5/16" (33 mm)
Ø 2-1/4" (57 mm)
9-1/2"
(241 mm)
K-690
K-691
Weight
Supply Hoses with
3/8" Compression
Fitting
1-3/8"
(35 mm) Max
20"
(508 mm)
10"
(254 mm)
9"
(229 mm)
7-1/2"
(191 mm)
15-1/8"
(384 mm)
16-5/8"
(422 mm)
2-7/8"
(73 mm)
3-1/4"
(83 mm)
4"
(102 mm)
4"
(102 mm)
Spray
Hose
10-1/2"
(267 mm)
3-3/8"
(86 mm)
2-1/2"
(64 mm)
Product Diagram
VINNATA
®
VINNATA
®
PULL-DOWN KITCHEN SINK FAUCET
Page2of2
1013943-4-
E
-
1
-
2
Kohler 690-BV Installation guide
- Category
- Faucets
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kohler K-15160-CP Specification
-
Kohler K-780-VS Installation guide
-
-
-
-
-
-
-
