Polaris Vac-Sweep 360 Operating instructions

Polaris
Brand
Polaris
Model
Vac-Sweep 360
Category
Above ground pool accessories
Type
Operating instructions
© 2015 Zodiac Pool Systems, Inc. All rights reserved. Polaris
®
and the Polaris 3-wheeled
cleaner design are registered trademarks of Zodiac Pool Systems, Inc.
All other trademarks referenced herein are the property of their respective owners.
TL-821 Rev C
Zodiac Pool Systems, Inc.
2620 Commerce Way, Vista, CA 92081
1.800.822.7933 | www.polarispool.com
Polaris 360 Quick Disconnect
Replacement Instructions
1. Unscrew the quick disconnect and remove it
from the hose. Discard the old hose nut.
2. Remove the filter screen from the old quick
disconnect by placing your finger inside the
filter screen, applying pressure and pulling
it out.
3. Rinse out the filter screen and press it firmly
into the new quick disconnect.
4. Unscrew the pressure relief valve from the
old quick disconnect and screw it into the
new quick disconnect.
5. Use the new hose nut to connect the new
quick disconnect to the hose.
Pool
Wall
or
Discard Old Hose Nut
Universal
Wall Fitting
Quick
Disconnect
Filter
Screen
Hose Nut
Hose
Pressure
Relief Valve
  • Page 1 1

Polaris Vac-Sweep 360 Operating instructions

Polaris
Brand
Polaris
Model
Vac-Sweep 360
Category
Above ground pool accessories
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents