Supersonic SC-2411 User manual

SC-2411

24

LED COLOR TV

R

Table Of Contents

Safety Information.................................................................................................................2

Preparations Guide

Important Safety Precautions.................................................................................................3

Installed And Connected TV

TV Bracket assemble.............................................................................................................4

TV Buttons And Terminal Interface........................................................................................ 5

External device connection diagram...................................................................6

Install And Connect TV...........................................................................................................8

Sound Menu.........................................................................................................14

Mai n Men u Operation................................................................................................12

Time Menu.....................................................................................................16

Setup Wizard ...............................................................................................................9

Setup Wizard

Select Input Source........................................................................................................................ 10

PC

Setup Menu........................................................................................................................17

Cananda Rating.........................................................................................................................24

1

PC Menu......................................................................................................................................29

TV Stand installation Instructions.......................................................................8

This user manual for reference only

Select Input Source

TV

Close Caption........................................................................................................................18

Lock Caption........................................................................................................................21

US Rating........................................................................................................................23

TV ........................................................................................................................23

MAPP ........................................................................................................................24

Hotel Menu.........................................................................................................................25

Channel Menu.........................................................................................................................27

Other Information

Help......................................................................................................................................31

Specifications.......................................................................................................................32

Remote Controller

............................................................................................................7

Safety Information

2

High voltages are used in the operation of

this product.to reduce the risk of electric

shock,do not remove cover of the cabinet,

refer servicing to qualified service personal

If the TV any changes or coarse adjustment, electric shocks

to be hurt, do not attempt to open a machine-maintenance,

customer contact centres needed overhaul.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence of important operting in the

literature accompanying the appliance.

Warning

The lightning flash with arrowhead symbol

within an equilateral triangle,is inten ded to

alert the user to the presence of uninsulated

dangerous voltage within the products

enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

3

Important Safety Precautions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and third grounding prong. The wide blade or third prong are

provided for your safety. When the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched, particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used caution when

moving the cart/apparatus combination to avoid injury tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods

of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped. Warning to reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture.

15. The apparatus shall be disconnected from the mains by placing the power/standby

switch in the standby position and unplugging the power cord of the apparatus from

the AC mains receptacle.

16. The socket-out shall be installed near the equipment and shall be easily accessible.

17. This product should never be placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the manufacturer's instructions have

been adhered to.

18. Apparatus shall not be exposed to dripping or splashing.

19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects,

lighted candles).

20. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling

only as recommended by the manufacturer.

21. Never place the TV, remote control or batteries near naked flames or other

heat sources, including direct sunlight. To prevent the spread of fire, keep

candles or other flames away from the TV, remote control and batteries at

all times.

22. The USB terminal should be loaded with 0.5 A under normal operation.

4

TV Bracket assemble

SOURCEMENUCH+

-

CH

-

VOLVOL+

Fix the TV on the wall

1.First,put the TV on the table smoothly and put some soft cloth on the table to avoid

scratching the screen.

2.User the screw driver to take off the screws which are fixed on the bottom stand

(the direction of the arrow, refer to the ptoto1).And take off the bottom stand(please

take off the screws and bottom stand carefully).

3.Make one bracket which can fix on the wall according to the size of arrow direction

of photo2 and photo3.

4.Drill four holes properly on the wall (the size only for reference) and put into four

screws.(optional parts) Drill four holes properly on the wall (the size only for reference)

and put into four screws.(optional parts)

5.according to the step 4,use the screwdriver to lock the screw on the back of the TV.

then hang the TV on the wall.

1 2

3

4

Note:

1.The bracket fixed on the wall is optional part.

2.when you assemble the TV, there should be no other articles on the around and front

and please keep the distance from other articles.

3.When assemble the TV, please ask the career man to fix in order to avoid the danger.

4.The fixing picture is only for reference.

5.Please follow the use manual about bracket assemble to fix the TV.

6.Attach the mounting bracket from the VESA compatible wall mounting kit.

TV Buttons And Terminal Interface

5

R

9. AV

signal input and relevant right/left

sound channel.

: external AV

VGA/AUDIO: VGA audio input.

: Connect the antenna to

the antenna input.

HDMI Input: Digital signal input from

HDMI video connector

YPbPr:Color difference

components input and relevant

video input

(3.5mm)

. COAXIAL:

14.USB: Only used for updating soft ware

Digital audio output

ANT 75

Ω

COAX IAL

INPUT

VIDEO R

L

AC 100-240V~

50/60Hz

HDMI

INP UT

Y Pb

Pr

14 13 6 10 7 12 11

9 8

External device connection diagram

DVD

Set-top boxes

HDMI

HDMI input connection

VIDEO R L

INPUT

AV input connection

AV output connection

VIDEO R L

INPUT

Y Pb Pr

INPUT

Y Pb Pr input connection

USB connection

TV connection

6

AV input connection

VGA input connection

R L

OUTPUT

Remote Controller

7

TV

AV YPBPR

HDMI PC

R

(1)Open the battery compartment cover

on the back side

(2)Insert two 1.5V batteries of AAA type

with correct polarity

(3)Close the battery compartment cover

on the back side

Universal Remote Control code:007F

(Universal Remote control is not included)

1

3

2

4

Install And Connect TV

8

TV ANT

FM ANT

TV signal output

Set your TV

To put your TV in a firm place which can

bear the weight of the TV.

To avoid danger, please don’t expose the

TV near water or heating place (such as

light, candle, heating machine),do not block

the ventilation at the back of TV.

Connect antenna and power

1.Connect the antenna cable to the antenna

socket on the back of the TV.

2.To plug the power cord of TV (AC 100-

240V~ 50/60Hz).

1

3

Turn on TV

3.Press the power button of the TV the

indication light will turn to green. if it is

on standby mode (the light is red),press

the power button on the remote control

to turn on the TV.

Note:

Picture for reference purposes only.

2

TV Stand Installation Instructions

1.Open the carton and remove the TV

and scattered accessories and base

(some models without base).

2.to avoid the injury of the TV, covered

with a soft mattress, put it on the table, face

down on a soft mattress, the base of the

neck is fixed on the TV with screws.

3.screw the base and connected to the TV.

4. the installation is complete.

R

9

Setup Wizard

Connect an RF cable from the TV’s input called “RF-In” and to your TV Aerial socket.

Select Language

Press </ > button to select the language to be used for menus and message.

Press ▼ / ▲ button to select go to next step and press ENTER/ button to go.

Select Time

Press ▼ / ▲ button to select the time zone, daylight saving time and time format you want to.

Press </ > button on the remote control to adjust.

Press ▼ / ▲ button on the remote control to select go to next step and press ENTER/ button

to go.

10

Auto Scan

Press </ > button to select the antenna type.

Press ▼ / ▲ button to select go to next step and press ENTER/> button to start auto scan.

Setup Wizard

11

Press INPUT button to display the input source list,

Press ▼ / ▲ or button to select the input

source you want to,

Press ENTER button to enter the input source,

Press EXIT button to quit.

INPUT

Select Input Source

Main Menu

Press MENU to display the main menu or return to the previous menu or close the main menu.

Press </ > to highlight the desired menu icon, and press ENTER to select.

Source Select

TV

AV

HDMI

Component

PC

12

Picture Menu

Pre ss

ENU to enter the main menu, Pre ss butt on to select.

Pre ss to enter.

ENU again to exit or back to pare nt menu.

butt on to select among Picture Mode /B ri ghtness/ Contra st / Color / Tint / Sharp ness / Color

Tempera tu re / Advanced Sett ings.

Pre ss to ente r.

Pre ss butt on to adjust.

ENU again or back to pare nt menu.

M </ >

ENTER / ▼

M

▼ / ▲

ENTER / ▼

</ >

M

【Pic tu re Mode】

Adjust picture mode to change pictu re appeara nce.

Pre ss butt on to select(S ta ndard / Dynamic / Soft / User) .

【Brig htn ess】

Pre ss butt on to adjust.

【Contra st】

Pre ss butt on to adjust.

</ >

Adjust th e visual percepti on outp ut of th e enti re pictu re , it will effe ct th e iuminousness of th e pictu re .

</ >

Adjust the highlight inte nsity of th e pictu re , but th e shadow of th e pictu re is invari able.

</ >

Note :T he bri ghtn ess,c ontra st, color, ti nt and sharpness are only available in User mode,y ou can adjust as

you like.

Sta ndard Pro duces a highly defi ned image in a norm ally lit ro om.

Dynamic Pro duces a highly defi ned image in a bri ghtl y lit room.

Soft Pro duces a highly defi ned image in a soft lit room.

User Select to custo mize pictu re settings.

TV

Main Menu Operation

13

【Colo r】

【Tint】

Adjust the hue(Red,G re en,B lue) of the picture.

Pre ss butt on to adjust.

【Sharpness】

Pre ss butt on to adjust.

【Colo r Tempera tu re】

【Advanced Settin gs】

Adjust advanced video fe atu re s to fi ne tune th e pictu re .

Pre ss butt on to ente r .

【Aspect Ratio 】

Adjust how th e pictu re fills th e scre en.

【Nois e Reductio n】

Set opti ons to re duce video noise.

Adjust the satu ra ti on of th e color based on your own like.

</ >

Adjust the peaking in th e detail of the picture.

</ >

Incre ase or re duce warm color of th e pictu re pers onally(re d),a nd th e cool color pers onally(b lue) accord ing

to your like.

> sub-menu.

Pre ss button to adjust.

Norm al

Norm al Auto matically adjust Aspect Rati o based on TV size and TV pro gra m.

Wide Use to watch wide screen(1 6:9) content.

Zoom Expands image to fi ll scre en. Top and button maybe cut off.

Cinema Stre tc hes image at edges but keeps a clear image in th e cente r.

Off Select to tu rn off video noise detecti on.

Low Dete ct and re duce low video noise.

Medium Dete ct and re duce modera te video noise.

High Detect and reduce enhanced video noise.

Auto Dete ct and re duce video noise auto matically.

Incre ase the sex-l inked colors fo r th e white .

Warm In cre ase th e re d color for the white.

Cool Incre ase th e blue to ne fo r the white.

TV

14

Sound Menu

Pre ss

ENU to ente r the main menu, Pre ss butt on to select.

Pre ss to enter.

ENU again to exit or back to pare nt menu.

butt on to select among Equalizer / Bass / Tre ble / Balance /M TS/ Audio Language /Digital Audio

Outp ut/ AVL .

Pre ss to ente r.

Pre ss butt on to adjust.

ENU again or back to pare nt menu.

M </ >

ENTER / ▼

M

▼ / ▲

ENTER / ▼

</ >

M

TV

【HDMI Mode】

Only available in HDMI input.

【Dynamic Contra st】

Auto mati cally adjust picture detail and bri ghtness.

Pre ss butt on to select (Off/O n).

Pre ss butt on to select (Video/G ra phic).

</ >

15

【Sound Mode】

Select a sound mode to achieve ideal sound.

Pre ss butt on to select(S ta ndard / Music / Movie / Sports / User) .

【Bass】

【Treble】

【Bala nce】

【MTS】

It is only available in ATV.

Pre ss butt on to select(M ono/Stereo/S AP).

【Audio Language】

. It is only available in DTV.

Pre ss butt on to select(E nglish / / ).

【Dig ita l Audio Outp ut】

Send digita l audio to external audio system.

Pre ss butt on to select.

【AVL】

select(O n / Off) .

</ >

Adjust the bass effe ct.Incre ases or decreases lower-p itc hed sounds.

</ >

Adjust the tre ble effe ct. In creases or decre ases high-pitc hed sounds.

</ >

Adjust the balance betw een left and ri ght speakers to adapt to your listening positi on.

</ >

Note :T he bass and tre ble are only available in User mode,y ou can adjust as you like.

Sta ndard Pro duces a balanced sound in all enviro nments .

Music Preserv es the ori ginal sound. Good fo r musical pro gra ms.

Movie Enhances tre ble and bass for a rich sound experi ence.

Sports Enhances vocals fo r TV audio.

User Select to custo mize audio sett ings.

Mono Sets th e sound to mono.

Ste re o Sets th e sound to ste reo when ste re o is not available, th e sound is auto matically switc hed

to mono.

SAP Sets th e sound to th e second audio progra m.

PCM Select to outp ut audio in 2-c hannel ste re o.

Raw Ori ginal image coded date .

Off Set digita l audio outp ut off.

Pre ss button to adjust.

Configure s the multi-tra ck sound.

Set th e auto volume contro l.

Pre ss butt on to

Select the language supporte d by the chosen digita l channel

Fre nch Spanish

NOTE:

Balance: This item can adjust the speaker ’s output, it enables you to listen to best at your position.

AVL: This item uses for reducing the difference between channel and program’s

volume automatically.

it made the overall water to be even. This function will also reduce the fluctuation of the sound.

TV

16

Time Menu

Pre ss

ENU to enter the main menu, Pre ss butt on to select.

Pre ss to enter.

ENU again to exit or back to pare nt menu.

butt on to select among Sleep Timer / Time Zone / Daylight Saving Time / Time Form at / Auto

Clock / Clock.

Pre ss to ente r.

Pre ss butt on to adjust.

ENU again or back to pare nt menu.

M </ >

ENTER / ▼

M

▼ / ▲

ENTER / ▼

</ >

M

Time Zone

Daylight Saving Time

Time Form at

Auto Clo ck

【Sle ep Tim er】

Set a ti mer fo r th e TV to tu rn off auto matically.

Pre ss butt on to select(O ff / 5min/1 0min /1 5min/ 30min / 60min / 90min / 120min/1 80min/240min).

【】

Select your time zone.

Pre ss butt on to select(E aste rn / Centra l / Mounta in / Pacifi c / Alaska / Hawaii /S amoa/

Newfoundland / Atl antic).

【】

Set th e daylight saving time fo r your area.

Pre ss butt on to select(O n / Off) .

【】

Select your time fo rm at.

Pre ss butt on to select(1 2-h our / 24-h our) .

【】

It is only available in DTV.

Pre ss butt on to select(O n / Off) .

</ >

Use to synchronize the display automati cally.

TV

17

Setup Menu

Pre ss

ENU to ente r the main menu, Pre ss butt on to select.

Pre ss to enter.

ENU again to exit or back to pare nt menu.

butt on to select among Menu Language / Tra nsparent / OSD Timeout / Closed Capti on /Over

Scan/ In put Label / Other sett ings / Resto re Defa ult / Setup Wizard .

Pre ss to ente r.

Pre ss butt on to adjust.

ENU again or back to pare nt menu.

M </ >

ENTER / ▼

M

▼ / ▲

ENTER / ▼

</ >

M

【Menu language】

Pre ss butt on to select language(E nglish / Français / Español).

【Transpare nt】

Adjust the tra nspare ncy of th e OSD (on scre en display) menu.

Pre ss butt on to select.(0%,2 5%,50%,7 5%,1 00%)

【OSD Tim e out】

Adjust the dura ti on of th e OSD (on scre en display) menu.

Pre ss butt on to select.(5 Sec., 15Sec., 30Sec.,45Sec.,60Sec.

【Clo sed Captio n】

Adjust Closed Capti oning settings. Only available under TV and AV sourc e.

Pre ss ENTER / button to ente r.

For deta il please re fe r to page 12.

Select an OSD menu language can be displayed.Defa ult English is selecte d as menu language.

</ >

TV

18

CC Mode

Analog CC

Dig ita l CC

O

Mode

Font Sty le

Font Siz e

Font Edge Sty le

Font Edge Color

FG Colo r

Colo r

FG Opacity

Opacity

【】

Turn Closed Captioning on/o ff.

Pre ss butt on to select(C C Off / CC On / CC OnMute ).

【】

Set Closed Capti oning for sta ndard (a nalog) pro gram.

Pre ss butt on to select(C C1 / CC2 / CC3 / CC4 / TEXT1 / TEXT2 / TEXT3 / TEXT4).

【】

Set Closed Capti oning for digita l progra m.

Pre ss butt on to select(O ff / Serv ice1 / Serv ice2 / Service3 / Service4 / Serv ice5 / Serv ice6).

【 ptio n】

Adjust the digita l Closed Capti oning sett ing.

Pre ss butt on to ente r.

【】

Set th e look of digita l Closed Capti oning. Auto mati c uses bro adcaste r’s sty le.

Pre ss butt on to select(D efa ult / Custom).

【】

Select fro m 8 fo nt sty les.

Pre ss butt on to select(D efa ult / Font 0 / Font 1 / Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7).

【】

Adjust the size of th e digita l Closed Capti oning font.

Pre ssvbutt on to select(D efault /N ormal / Larg e / Small).

【】

Adjust the edge of th e digita l Closed Capti oning box.

Pre ss butt on to select(D efa ult / None / Raised / Depressed / Uniform / Left Shadow / Right Shadow).

【】

Adjust the color of th e digita l Closed Captioning box.

Pre ss butt on to select(D efa ult/ Black / White / Red / Gre en / Blue / Yellow / Magenta / Cyan).

【】

Adjust the color of th e digital Closed Captioning fo nt.

Pre ss butt on to select(D efa ult/ Black / White / Red / Gre en / Blue / Yellow / Magenta / Cyan).

【BG 】

Adjust the digita l Closed Capti oning backgro und color.

Pre ss butt on to select(D efa ult/ Black / White / Red / Gre en / Blue / Yellow / Magenta / Cyan).

【】

Adjust the tra nspare ncy of th e digita l Closed Capti oning font.

Pre ss butt on to select(D efa ult / Solid / Flashing / Translucent) .

【BG 】

Adjust the digita l Closed Capti oning backgro und tra nsparency.

Pre ss butt on to select(D efa ult / Solid / Flashing / Translucent) .

</ >

>

</ >

Close Caption

TV

19

【Over Scan】

Pre ss butt on to select(O n / Off) .

It is only available to ente r 1080i/7 20p/1 080p in DTV/C omponent/HDMI.Defa ult is On.

It fi xed set to be On in ATV/AV. It fi xed set to be Off in PC/USB.

【Input Labels】

Cre ate labels for the devices connecte d to your TV.

Pre ss ENTER / button to ente r.

【Oth er Settin gs】

Set th e para mete r of audio only, no signal power off and no opera ti on power off.

Pre ss ENTER / button to ente r.

【Blu e Scre en】

To select th e tra nsiti on ty pe required while changing fro m one channel to anoth er

Pre ss butt on to select(O n / Off) .

【Audio Only】

Play the audio with th e pictu re turned off. When you turn th e Audio Only on and exit th e OSD menu,

the panel will be dark ; and th en pre ss any key to exit th e Audio Only status.

Pre ss butt on to select(O n / Off) .

</ >

TV

Page is loading ...

Supersonic SC-2411 User manual

This manual is also suitable for

Supersonic SC-2411 User manual

Related papers

Other documents