Sony XS-GTF10382 Operating instructions

Sony
Brand
Sony
Model
XS-GTF10382
Category
Loudspeakers
Type
Operating instructions

This manual is also suitable for

4-441-099-11 (1)
3 way Speaker
XS-GTF69382
XS-GTF16382
XS-GTF13382
XS-GTF10382
Instructions
Dimensions
XS-GTF69382
237 (9
3
/8)
118 (4
3
/4)
4 - 4.5 × 7.5
(
3
/16 ×
5
/16)
166 (6
5
/8)
168 (6
5
/8)
153 (6
1
/8)
222 (8
3
/4)
272 (10
3
/4)
ø 80 (3
1
/4)
184 (7
1
/4)
46
(1
13
/16)
4 - ø 4.5 (
3
/16)
73
(2
7
/8)
22
(
7
/8)
XS-GTF16382
150 (6)
4 - ø 4.5 (
3
/16)
ø 126 (5)
ø 75 (3)
ø 158 (6
1
/4)
45°
45°
P.C.D. ø 142 (5
5
/8)
5 (
7
/32)
166 (6
5
/8)
ø 176 (7)
29
(1
3
/16)
42
(1
11
/16)
9
(
3
/8)
Unit: mm (in)
Reference Point
Reference Plane
Reference Axis
4 - ø 4.5 (
3
/16)
ø 114.5 (4
5
/8)
ø 130 (5
1
/8)
ø 160 (6
3
/8)
45º
ø 70 (2
7
/8)
45º
XS-GTF13382
26
(1
1
/16)
45
(1
13
/16)
6
(
1
/4)
P.C.D. ø 136 (5
3
/8)
5 (
7
/
32)
XS-GTF10382
4 - ø 4.5 (
3
/16)
ø 90.5 (3
5
/8)
ø 102.5 (4
1
/8)
ø 140 (5
5
/8)
45º
ø 65 (2
5
/8)
45º
4 - 6 × 9.25
(
1
/4 ×
3
/8)
24
(
31
/32)
43
(1
3
/4)
6
(
1
/4)
P.C.D. ø 117 (4
5
/8)
Precautions
Do not continuously use the speaker system beyond
the peak power handling capacity.
Keep recorded tapes, watches, and personal credit
cards using magnetic coding away from the speaker
system to protect them from damage caused by the
magnets in the speakers.
Please note the following when installing the units;
otherwise malfunction and/or deterioration in
sound quality may result.
- Do not touch the diaphragms and/or speaker
cones by hand or with tools.
- Do not put your fingers through the holes of the
frame.
- Do not drop foreign objects in the units.
If you cannot find an appropriate mounting
location, consult your car dealer or your nearest
Sony dealer before mounting.
XS-GTF69382
Speaker Coaxial 3 way:
Woofer 16 × 24 cm (6 × 9 in)
cone type
Tweeter 6.6 cm (2
5
/8 in) cone
type
Super Tweeter 1.1 cm (
7
/16 in)
dome type
Short-term Maximum Power*
1
420 W*
2
Rated power 50 W*
2
Rated impedance 4 Ω
Output sound pressure level 92±2 dB (1 W, 1 m)*
2
Effective frequency range 40 – 22,000 Hz*
2
Mass Approx. 1,040 g (2 lb 5 oz)
per speaker
Supplied accessories Parts for installation
XS-GTF16382
Speaker Coaxial 3 way:
Woofer 16 cm (6
1
/2 in) cone
type
Tweeter 3.5 cm (1
7
/16 in)
balanced dome type
Super Tweeter 0.6 cm (
1
/4 in)
dome type
Short-term Maximum Power*
1
260 W*
2
Rated power 40 W*
2
Rated impedance 4 Ω
Output sound pressure level 91±2 dB (1 W, 1 m)*
2
Effective frequency range 50 – 24,000 Hz*
2
Mass Approx. 580 g (1 lb 5 oz) per
speaker
Supplied accessories Parts for installation
XS-GTF13382
Speaker Coaxial 3 way:
Woofer 13 cm (5
1
/4 in) cone
type
Tweeter 2.5 cm (1 in)
balanced dome type
Super Tweeter 0.6 cm (
1
/4 in)
dome type
Short-term Maximum Power*
1
230 W*
2
Rated power 35 W*
2
Rated impedance 4 Ω
Output sound pressure level 88±2 dB (1 W, 1 m)*
2
Effective frequency range 60 – 24,000 Hz*
2
Mass Approx. 480 g (1 lb 1 oz) per
speaker
Supplied accessories Parts for installation
XS-GTF10382
Speaker Coaxial 3 way:
Woofer 10 cm (4 in) cone
type
Tweeter 2.5 cm (1 in)
balanced dome type
Super Tweeter 0.6 cm (
1
/4 in)
dome type
Short-term Maximum Power*
1
210 W*
2
Rated power 30 W*
2
Rated impedance 4 Ω
Output sound pressure level 88±2 dB (1 W, 1 m)*
2
Effective frequency range 60 – 24,000 Hz*
2
Mass Approx. 390 g (14 oz) per
speaker
Supplied accessories Parts for installation
Design and specifications are subject to change without notice.
*
1
“Short-term Maximum Power” may also be referred to as
“Peak Power.”
*
2
Testing Condition: IEC 60268-5 (2003-05)
Mounting
Before mounting
A depth of at least 73 mm (2
7
/8 in) (42 mm / 1
11
/16
in)*
1
(45 mm / 1
13
/16 in)*
2
(43 mm / 1
3
/4 in)*
3
is
required for flush mounting. Measure the depth of the
area where you are to mount the speaker, and ensure
that the speaker is not obstructing any other
components of the car. Keep the followings in mind
when choosing a mounting location:

Make sure that nothing is obstructing around the
mounting location of the door (front or rear) or the
rear tray where you are to mount the speaker.

A hole for mounting may already be cut out of the
inner panel of the door (front or rear) or the rear
tray. In this case, you need to modify the board only.

If you are to mount this speaker system in the door
(front or rear), make sure that the speaker terminals,
frame or magnet do not interfere with any inner
parts, such as the window mechanism in the door
(when you open or close the window), etc.
Also make sure that the speaker grille does not
touch any inner fittings, such as the window cranks,
door handles, arm rests, door pockets, lamps or
seats etc.

If you are to mount this speaker system in the rear
tray, make sure that the speaker terminals, frame or
magnet do not touch any inner parts of the car, such
as the torsion bar springs (when you open or close
the trunk (boot) lid), etc.
Also make sure that the speaker grille does not
touch any inner fittings, such as seat belts, head
rests, center brake lights, inner covers of the rear
wipers, curtains or air purifiers, etc.
*
1
(XS-GTF16382)
*
2
(XS-GTF13382)
*
3
(XS-GTF10382)
Specifications
Parts list
XS-GTF69382
(× 1)
XS-GTF16382
(× 1)
XS-GTF10382
(× 1)
XS-GTF13382
(× 1)
(× 2) (× 2)
(× 2) (× 2)
XS-GTF69382 XS-GTF16382 XS-GTF13382 XS-GTF10382
(× 2)
ø 4
(× 8)
(× 8)
XS-GTF69382 XS-GTF16382 XS-GTF13382 XS-GTF10382
(× 2) (× 2) (× 2) (× 2)
Mounting from the car interior
DOOR (FRONT/REAR)
(XS-GTF16382/XS-GTF13382/XS-GTF10382)
REAR TRAY
(XS-GTF69382)
3
1
Mark the 4 bolt holes and make them 3.2 mm* (
1
/8 in) in diameter.
Unit: mm (in)
XS-GTF16382: ø 127 (5)
XS-GTF13382: ø 115 (4
5
/8)
XS-GTF10382: ø 91 (3
5
/8)
*
1
*
1
When using : ø 5 mm (
7
/32 in)
ø 3.2 mm (
1
/8)
2
*
2
*
3
Black-striped cord
Power amplifier, etc.
*
2
Note
When releasing , push down on the catch firmly and release carefully.
If excessive force is used, damage to the speaker or terminal cable may
result.
*
3
White cord — Left speaker
Grey cord — Right speaker
3
XS-GTF16382
Unit: mm (in)
XS-GTF13382/XS-GTF10382
XS-GTF13382: 4 (
3
/16)
XS-GTF10382: 7 (
9
/32)
13 (
17
/32
)
1
Mark the 4 bolt holes and make them 3.2 mm* (
1
/8 in) in diameter.
Unit: mm (in)
*
1
When using : ø 5 mm (
7
/32 in)
2
154 (6
1
/8) × 223 (8
7
/8)
Rear tray
ø 3.2 mm (
1
/8)*
1
* *
*
2
*
3
Power amplifier, etc.
Black-striped cord
*
2
Note
When releasing , push down on the catch firmly and
release carefully.
If excessive force is used, damage to the speaker or terminal
cable may result.
*
3
White cord — Left speaker
Grey cord — Right speaker
Flat mounting (installed flush with the surface of the dash)
ø 91 (3
5
/8)
XS-GTF10382
Unit: mm (in)
XS-GTF13382
This speaker can be made to fit in almost any type of car by removing the mounting tabs.
Use clippers or pliers, etc. to cut or snap two of the mounting tabs off so that it is even with the edge of the
speaker frame as illustrated.
Note
After removing the mounting tabs, handle the speaker frame with care, as the edges may be sharp.
  • Page 1 1
  • Page 2 2

Sony XS-GTF10382 Operating instructions

Sony
Brand
Sony
Model
XS-GTF10382
Category
Loudspeakers
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents