Mitsubishi Electric RS-232C Option unit MR-C-T01 Installation guide

Brand: Mitsubishi Electric

Model: RS-232C Option unit MR-C-T01

Type: Installation guide

General-Purpose AC Servo

RS-232C Option unit

MR-C-T01

Installation Guide

The RS-232C option unit is required when using the Servo Configuration software

(MRZJW3-SETUP31E or later) to perform parameter setting changes, graph

display, test operation and others on a personal computer.

1. Configuration diagram

Personal computer

RS-232C

Option unit

MR-C-T01

Servo amplifier

to RS-232C

Connector

Communication cable

Servo motor

CN3 CN2

CN3

CN3A

2. Installation and removal of the unit

NOTICE

Install or remove option unit as vertically as possible to or from the

servo amplifier. If it is installed or removed diagonally, the connector

CN3 may be damaged.

1) Installation

Install the unit after disconnecting the encoder cable from CN2. Securely insert

the two catches of the MR-C-T01 into the sockets of the servo amplifier.

Catch

Socket

Catch

CN3

MEMO-

RANDUM

Install option unit after fixing the servo amplifier on the control box.

After installation, the servo amplifier fixing holes are covered by the

option unit and the servo amplifier cannot be fixed to the control box.

2) Removal

Hold down the PB button and pull the front side down about 5mm (0.20). Then,

pull the back side off.

Button

[Unit: mm(in)]

About 5mm (0.20in)

3. Outline drawing after installation

MELSERVO

MR-C A

CN1

FRONT

CN2

CN3A

MITSUBISHI

MODE

DOWN

SET

40(1.57)

(1.42)

95(3.74) 100(3.94)

130(5.12)

(1.06)

2.5(0.10)

105(4.13)

1(0.04)

6(0.24)

IB(NA)67285-B (0006) MEE

MITSUBISHI ELECTRIC CORPORATION

HEAD OFFICE: MITSUBISHI DENKI BLDG MARUNOUCHI TOKYO 100-8310

Specifications are subject to change without notice.

This installation guide uses recycled paper.

Published June, 2000

Mitsubishi Electric RS-232C Option unit MR-C-T01 Installation guide

Mitsubishi Electric RS-232C Option unit MR-C-T01 Installation guide

Mitsubishi Electric RS-232C Option unit MR-C-T01 Installation guide

Related papers

Other documents