TEAC WS-A70 Quick start guide
- Category
- Portable speakers
- Type
- Quick start guide
Quick Start Guide
(Network Setup)
Before you start
Connecting with AirPlay Settings
WS-A70
Network Music System
The WS-A70 requires network connection via either Wireless LAN (Wi-Fi) or LAN Cable.
This Quick Start Guide explains how to connect the WS-A70 to the same network to which your smartphone or tablet
is connected, and set the WS-A70 to play music.
Music Playback via Wireless LAN (Wi-Fi) Music Playback via LAN cable
It takes another one minute until the WS-A70
appears in this list, after the main unit shows
volume level "50".
You can change speaker name in this step, for
easy organization. (ex. Living Room Speaker)
Refer to "Start up the App" in the
Network Application Manual.
(Scan the QR code on page 1)
iOS
Visit the TEAC web site and see the "Start up the App" section in the
Network Application Manual (PDF).
1. Scan the QR code. (http://teac-global.com/)
2. Select your country/region in the TEAC Downloads section (lower left).
3. Select the WS-A70.
4. Select the Network Application Manual (PDF).
* iOS only
Conrm that your smartphone or tablet is
connected to your Wi-Fi.
Use AirPlay Settings or Google Home app
to apply network settings to the WS-A70.
Use AirPlay*
(see page 4)
Use Google Home
(see page 2 and 3)
Connect the WS-A70 and Wi-Fi Router
via a LAN cable.
Connection completes.
IP Address is automatically assigned
Connection completes.
Tap here to change speaker name.
Tap "Settings"
on the iOS device.
Tap "Wi-Fi"
in the Settings.
Scroll upwards, and
select "WS-A70" in the
new AirPlay speaker list.
Tap "Next" and
follow the steps.
Connection complete.
Tap "Done" then,
leave from the Settings.
OPWSA70TEA04
4 1
Connecting with Google Home app
Before you start this step, install the Google Home app from
the App Store or Google Play (free download).
Refer to "Start up the App" in the
Network Application Manual.
(Scan the QR code on page 1)
iOS Android
Connection completes.
Quit the Google Home app.
You can skip the Tutorials
on Chromecast-enabled apps.
You may be asked
to enter your
Wi-Fi password.
Tap "Google Home" app.
Tap "Discover" in lower section
Tap "SET UP"
Tap "YES" to continue.
Select a speaker location
from the list.
Then, tap "NEXT".
Choose your Wi-Fi
in the network list.
Then, tap "NEXT".
On some Wi-Fi routers, the default
password for the Wi-Fi is shown on the
case. The SSID is the default network
name.
Connection is in progress.
Tap "
>
" to follow the steps.
It takes another one minute until the WS-A70
is ready to configure, after the main unit shows
volume level "50".
Make sure that Bluetooth® is ON on iOS device.
You will hear a test sound from the WS-A70.
Connection is in progress.
Connection is in progress.
(continued from page 2)
(continued on page 3)
Choose your Wi-Fi.
2 3
-
1
-
2
TEAC WS-A70 Quick start guide
- Category
- Portable speakers
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Samsung SM-A505FN/DS User manual
-
Samsung SM-A705FN/DS User manual
-
-
-
Archos 70 Series User 502711 User manual
-
Archos 70 Faqs
-
-
Polar Vantage V Titan Quick start guide
-
-