LG 32SE3B-B User manual

LG Digital

Signage

(MONITOR SIGNAGE)

OWNER’S MANUAL

Please read this manual carefully before operating your set and retain it

for future reference.

32SE3B

43SE3B

49SE3B

55SE3B

65SE3B

32SE3KB

43SE3KB

49SE3KB

55SE3KB

65SE3KB

43SL5B

49SL5B

55SL5B

www.lg.com

2

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

3 SAFETY PRECAUTIONS

3 Precautions in installing the product

4 Precautions to the AC adapter and

electrical power

5 Precautions in moving the product

5 Precautions in using the product

5 Mounting on a wall

6 LICENSES

7 ASSEMBLY AND PREPARATION

7 Accessories

8 Optional Accessories

10 Parts and Buttons

12 Connecting the Stand

13 Connecting the Speakers

14 Using the IR Receiver

15 Portrait Layout

16 Attaching and removing the LG Logo

Bracket

17 Installing on a Wall

19 REMOTE CONTROL

21 Displaying the Device Name

Connected to an Input Port

21 White Balance Adjust Menu

22 Using Picture ID

23 MAKING CONNECTIONS

23 Connecting to a PC

25 External Device Connection

28 USING THE MONITOR

28 Using the Input List

28 Adjusting Aspect Ratio

30 ENTERTAINMENT

30 Using the Network

30 - Connecting to a Network

32 - Network Status

32 Using the My Media

32 - Connecting USB storage devices

34 - Browsing Files

36 - Viewing Movies

39 - Viewing Photos

41 - Listening to Music

43 - Viewing the Contents List

44 CUSTOMIZING SETTINGS

44 Accessing Main Menus

45 - PICTURE Settings

48 - AUDIO Settings

49 - TIME Settings

50 - OPTION Settings

53 - NETWORK Settings

54 TROUBLESHOOTING

56 PRODUCT SPECIFICATIONS

68 IR CODES

70 TO CONTROL MULTIPLE

PRODUCTS

70 Connecting the Cable

71 RS-232C Configurations

71 - 4P Cable

71 - RS-232C Cable

71 Communication Parameter

72 Command Reference List

74 Transmission / Receiving Protocol

3

SAFETY PRECAUTIONS

ENGLISH

Safety precautions

Please read these safety precautions carefully before using the

product.

WARNING

• Indoor Use Only.

WARNING

If you ignore the warning message, you may be seriously injured

or there is a possibility of accident or death.

CAUTION

If you ignore the caution message, you may be slightly injured or

the product may be damaged.

Precautions in installing the product

WARNING

• Keep away from heat sources like electrical heaters.

►► Electrical shock, fire, malfunction or deformation may occur.

• Keep the packing anti-moisture material or vinyl packing out of

the reach of children.

►► Anti-moisture material is harmful if swallowed. If swallowed by

mistake, force the patient to vomit and visit the nearest hospital.

Additionally, vinyl packing can cause suffocation. Keep it out of the

reach of children.

• Do not put heavy objects on the product or sit upon it.

►► If the product collapses or is dropped, you may be injured. Children

must pay particular attention.

• Do not leave the power or signal cable unattended on the

pathway.

►► The passerby can falter, which can cause electrical shock, fire, product

breakdown or injury.

• Install the product in a neat and dry place.

►► Dust or moisture can cause electrical shock, fire or product damage.

• If you can smell smoke or other odors or hear a strange sound

unplug the power cord and contact the service center.

►► If you continue to use without taking proper measures, electrical

shock or fire can occur.

• If you drop the product or the case is broken, turn off the product

and unplug the power cord.

►► If you continue to use without taking proper measures, electrical

shock or fire can occur. Contact the service center.

• Do not drop an object on or apply impact to the product. Do not

throw any toys or objects on the product screen.

►► It can cause injury to human, problem to product and damage the

display.

• Do not let the product fall or drop when connecting it with an

external device.

►► This may cause injury and/or damage to the product.

• When connecting it with a game device, keep a distance of four

times as long as the diagonal measurement of the screen from

the device.

►► If the product falls because of the short cable, this may cause injury

and/or damage to the product.

• Leaving a fixed image on the screen for a long time may cause

damage to the screen and cause image burn-in. To use the product

for a long period of time, use a screen saver on the PC or utilize

the residual image prevention function on the product, and when

the product is not used, turn off the power. Burn-in and related

problems are not covered by the warranty on this product.

• Do NOT install this product on a wall where there is high risk of

exposure to oil fumes or mist.

►► This may damage product and cause is to fail.

CAUTION

• Make sure the product ventilation hole is not blocked. Install the

product in a suitably wide place (more than 10 cm from the wall)

►► If you install the product too close to the wall, it may be deformed or

fire can break out due to internal heat.

• Do not block the ventilation hole of the product by a tablecloth

or curtain.

►► The product can be deformed or fire can break out due to overheating

inside the product.

• Install the product on a flat and stable place that has no risk of

dropping the product.

►► If the product is dropped, you may be injured or the product may

be broken.

• Install the product where no EMI occurs.

• Keep the product away from direct sunlight.

►► The product can be damaged.

• If you install the product in a place that does not meet the

recommended conditions, this may cause serious damage to the

product’s picture quality, life cycle and appearance. Please check

with LG or a qualified installer before installing. This caution

applies to a place where there is an abundance of fine dust or oil

mist, chemical substances are used, the temperature is very high

or low, the humidity is very high, or the product is likely to remain

turned on for a long period of time (airport and train station),

failure to do so will invalidate the warranty.

• Do not install the product in an area with poor ventilation (e.g.on

a bookshelf, in a closet) or outside and avoid placing on cushions

or carpets.

• In addition, do not install it where there are heating objects such

as lighting equipment.i

4

SAFETY PRECAUTIONS

ENGLISH

Precautions to the AC adapter and

electrical power

WARNING

• If water or any foreign substance goes inside the product (TV,

monitor, power cord, or AC adapter), disconnect the power cord

immediately and contact the service center.

►► Otherwise, this may cause a fire or electric shock due to damage to

the product.

• Do not touch the power plug or AC adapter with wet hands. If the

pins of the plug are wet or dusty, wipe and dry them before use.

►► Otherwise, this may cause a fire or electric shock.

• Make sure to completely insert the power cord into the AC adapter.

►► If loosely connected, the poor connection may cause a fire or electric

shock.

• Be sure to use power cords and AC adapters provided or approved

by LG Electronics, Inc.

►► The use of non-approved products may cause a fire or electric shock.

• When unplugging the power cord, always pull it by the plug. Do

not bend the power cord with excessive force.

►► The power line can be damaged, which may cause electric shock

or fire.

• Be careful not to step or place heavy objects (electronic appliances,

clothing, etc.) on the power cord or AC adapter. Be careful not to

damage the power cord or AC adapter with sharp objects.

►► Damaged power cords may cause a fire or electric shock.

• Never disassemble, repair or modify the power cord or AC adapter.

►► This may cause a fire or electric shock.

• Make sure to connect the power cable to the grounded current.

►► You may be electrocuted or injured.

• Use the rated voltage only.

►► The product can be damaged, or you may be electrocuted.

• In the presence of thunder and lightning, never touch the power

cord and signal cable because it can be very dangerous.

►► It can cause electric shock.

• Do not connect several extension cords, electrical appliances

or electrical heaters to a single outlet. Use a power bar with a

grounding terminal designed for exclusive use with the computer.

►► A fire can break out due to overheating.

• Do not touch the power plug with wet hands. Additionally, if

the cord pin is wet or covered with dust, dry the power plug

completely or wipe dust off.

►► You may be electrocuted due to excess moisture.

• If you don't intend to use the product for a long time, unplug the

power cable from the product.

►► Covering dust can cause a fire, or insulation deterioration can cause

electric leakage, electric shock or fire.

• Fix the power cable completely.

►► If the power cable is not fixed completely, a fire can break out.

• Do not insert a conductor (like a metal chopstick) into one end

of the power cable while the other end is connected to the input

terminal on the wall. Additionally, do not touch the power cable

right after plugging into the wall input terminal.

►► You may be electrocuted.

• The appliance coupler is used as the disconnect device.

• Please make sure the device is installed near the wall outlet to

which it is connected and that the outlet is easily accessible.

• As long as this unit is connected to the AC wall outlet, it is not

disconnected from the AC power source even if the unit is turned

off.

CAUTION

• Be sure to keep the outlet, AC adapter, and pins of the power plug

clean from dust and etc.

►► This may cause a fire.

• Do not unplug the power cord while the product is in use.

►► Electrical shock can damage the product.

• Use only the power cord supplied with the unit. If you use another

power cord, make sure that it is certified by the applicable national

standards when not provided by the supplier. If the power cable is

faulty in any way, please contact the manufacturer or the nearest

authorized repair service provider for a replacement.

5

SAFETY PRECAUTIONS

ENGLISH

Precautions in moving the product

WARNING

• Make sure to turn off the product.

►► You may be electrocuted or the product can be damaged.

• Make sure to remove all cables before moving the product.

►► You may be electrocuted or the product can be damaged.

• Make sure the panel faces forward and hold it with both hands to

move. If you drop the product, the damaged product can cause

electric shock or fire. Contact an authorized the service center for

repair.

• Make sure the product is turned off, unplugged and all cables

have been removed. It may take 2 or more people to carry larger

apparatus. Do not press against or put stress on the front panel of

the apparatus.

CAUTION

• Do not shock the product when moving it.

►► You may be electrocuted or the product can be damaged.

• Do not dispose the product-packing box. Use it when you move.

Precautions in using the product

WARNING

• Do not disassemble, repair or modify the product at your own

discretion.

►► Fire or electric shock accident can occur.

►► Contact the service center for check, calibration or repair.

• When the display is to be left unattended for an extended period

of time, unplug it from the wall outlet.

• Keep the product away from water.

►► Fire or electric shock accident can occur.

• Do not shock or scratch the front and sides of the screen with

metallic objects.

►► Otherwise, it may cause damage to the screen.

• Avoid high temperatures and humidity.

CAUTION

• Do not put or store inflammable substances near the product.

►► There is a danger of explosion or fire due to careless handling of the

inflammable substances.

• When cleaning the product, unplug the power cord and scrub

gently with a soft cloth to prevent scratching. Do not clean with a

wet cloth or spray water or other liquids directly onto the product.

An electric shock may occur. (Do not use chemicals such as

benzene, paint thinners or alcohol)

• Take a rest from time to time to protect your vision.

• Keep the product clean at all times.

• Take a comfortable and natural position when working with a

product to relax the muscles.

• Take a regular break when working with a product for a long time.

• Do not press strongly upon the panel with a hand or sharp object

such as nail, pencil or pen, or make a scratch on it.

• Keep the proper distance from the product.

►► Your vision may be impaired if you look at the product too closely.

• Set the appropriate resolution and clock by referring to the User’s

Guide.

►► Your vision can be impaired.

• Use authorized detergent only when cleaning the product. (Do not

use benzene, thinner or alcohol.)

►► Product can be deformed.

• Do not expose to dripping or splashing and do not place objects

filled with liquids, such as vases, cups, etc. on or over the

apparatus (e.g. on shelves above the unit).

• Batteries should not be exposed to excessive heat. For example,

keep away from direct sunlight, open fireplace and electric

heaters.

• Do NOT place non-rechargeable batteries in charging device.

• Using headsets (earphones) for a long time or listening loudly can

cause damage to your hearing.

• Spray water onto a soft cloth 2 to 4 times, and use it to clean the

front frame; wipe in one direction only. Too much moisture may

cause staining.

• Do not use products using high voltage around the Monitor.

(e.g., a bug zapper)

►► Monitor may have malfunction as its electrical shock.

Mounting on a wall

• Do NOT install this product by yourself as you may injure yourself

or cause damage to product. Please contact Service personnel

authorised by Manufacturer.

6

LICENSES

ENGLISH

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit

www.lg.com.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or

registered trademarks of HDMI Licensing LLC in the United States and other countries.

This DivX Certified® device has passed rigorous testing to ensure it plays DivX®

video.

To play purchased DivX movies, first register your device at

vod.divx.com

. Find your

registration code in the DivX VOD section of your device setup menu.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are

used under license.

Covered by one or more of the following U.S. patents:

7,295,673; 7,460,668; 7,515,710; 7,519,274.

Manufactured under license from Dolby Laboratories. Dolby and the double-D

symbol are trademarks of Dolby Laboratories.

7

ASSEMBLY AND PREPARATION

ENGLISH

ASSEMBLY AND PREPARATION

• Always use genuine components to ensure safety and product performance.

• The product warranty will not cover damage or injury caused by the use of counterfeit components.

• The accessories provided with your product may vary depending on the model or region.

• Product specifications or contents in this manual may be changed without prior notice due to upgrade of

product functions.

• SuperSign Software & Manual

- Downloading from the LG Electronics website.

- Visit the LG Electronics website (

http://partner.lge.com

) and download the latest software for your model.

CAUTION

NOTE

Remote Control,

Batteries (AAA) 2 EA

Power Cord

D-sub 15-pin Signal

Cable

Card and the Letter of

Warranty

RS-232C Gender IR Receiver

Accessories

Check your product box for the following items. If there are any missing accessories, contact the local dealer

where you purchased your product. The illustrations in this manual may differ from the actual product and

accessories.

8

ASSEMBLY AND PREPARATION

ENGLISH

Optional Accessories

Without prior notice, optional accessories are subject to change to improve the performance of the product,

and new accessories may be added. The illustrations in this manual may differ from the actual product and

accessories.

• Cable holder/cable tie may not be available in some areas or for some models.

• Optional accessories are available for some models. If necessary, please purchase them separately.

Stand kit

Speaker kit

NOTE

Screws

Diameter 4.0 mm x Pitch 0.7 mm

Screws

Diameter 4.0 mm x Pitch

0.7 mm x Length 8 mm

(including spring washer)

Screws

Diameter 4.0 mm x Pitch

1.6 mm x Length 10 mm

Speakers

SP-5000

Stand

ST-322T 32SE3*

ST-432T 43SE3*/43SL5B

ST-492T

49SE3*/55SE3*

49SL5B/55SL5B

ST-652T 65SE3*

Model

Length

(including

spring washer)

Quantity

32SE3* 10 mm 6 EA

43SE3*

43SL5B

14 mm 8 EA

49SE3*

49SL5B

14 mm 8 EA

55SE3*

55SL5B

14 mm 8 EA

65SE3* 16 mm 8 EA

Stand

Spacers

Cable holder/

Cable Tie

(Only for **SE3B/**SL5B model)

32SE3* -

43SE3*

43SL5B

2 EA

49SE3*

49SL5B

55SE3*

55SL5B

65SE3*

9

ASSEMBLY AND PREPARATION

ENGLISH

Wi-Fi Dongle kit

AN-WF500

Screws

Media Player kit

CD (Owner's Manual)/

Cards

Media Player

MP500/ MP700

NOTE

• Optional accessories are available for some models. If necessary, please purchase them separately.

( It may not be supported depending on the model.)

10

ASSEMBLY AND PREPARATION

ENGLISH

IR&LIGHT

SENSOR

LAN

SPEAKER

OUT

RS-232C

IN

RS-232C

OUT

EXT IR

IN

AUDIO

OUT

AUDIO

IN

DVI-D IN LAN

USB 1

5 V 1.0 A

USB 2

5 V 1.0 A

RGB IN

Parts and Buttons

Connection

Panel

Buttons

Buttons Description

INPUT Changes the input source.

MENU Accesses the main menus, or saves your input and exits the menus.

Adjust the up and down.

Moves left and right.

AUTO/SET Displays the current signal and mode.

/ I

Turns the power on or off.

- The image may be different according to the model

(Only for

**SE3B/**SL5B

model)

32/43/49/55SE3B 32/43/49/55SE3KB

43/49/55SL5B

11

ASSEMBLY AND PREPARATION

ENGLISH

IR&LIGHT

SENSOR

LAN

SPEAKER

OUT

RS-232C

IN

RS-232C

OUT

EXT IR

IN

AUDIO

OUT

AUDIO

IN

DVI-D IN LAN

USB 1

5 V 1.0 A

USB 2

5 V 1.0 A

RGB IN

Connection

Panel

Buttons

Buttons Description

INPUT Changes the input source.

MENU Accesses the main menus, or saves your input and exits the menus.

Adjust the up and down.

Moves left and right.

AUTO/SET Displays the current signal and mode.

/ I

Turns the power on or off.

65SE3B 65SE3KB

(Only for **SE3B

model)

12

ASSEMBLY AND PREPARATION

ENGLISH

2 Use the screws to secure the stand to the back

of the product as shown below.

Connecting the Stand

- For certain models only.

- The image may be different according to the

model

3 Use the screws to secure the stand to the back

of the product as shown below.

1 Place a soft cloth on the table and place the

product with the screen facing downward.

1 Place a soft cloth on the table and place the

product with the screen facing downward.

2 Tighten stand spacers on the back of the

product as shown below.

32SE3*

43/49/55/65SE3* 43/49/55SL5B

13

ASSEMBLY AND PREPARATION

ENGLISH

Connecting the Speakers

- For certain models only. (Only for **SE3B/**SL5B

model)

- The image may be different according to the

model.

1 Connect an input signal cable before installing

the speakers.

1 Connect an input signal cable before installing

the speakers.

3 Then connect the speaker cable. After installing

your speakers, use holders and cable ties to

organize the speaker cables.

3 Then connect the speaker cable. After installing

your speakers, use holders and cable ties to

organize the speaker cables.

2 Mount the speakers by using screws as

shown below. Make sure the power cable is

disconnected before making a connection.

2 Mount the speakers by using screws as

shown below. Make sure the power cable is

disconnected before making a connection.

32SE3B

43/49/55/65SE3B 43/49/55SL5B

14

ASSEMBLY AND PREPARATION

ENGLISH

NOTE

Using the IR Receiver

- The image may be different according to the

model.

This allows a remote control sensor to be placed

in a custom location. Then that display can control

other displays via an RS-232C cable. Install the IR

receiver towards the front of the set.

IR Receiver cable

• When you see from the back of the set, if the

IR receiver cable does not face front, the signal

reception range may shorten.

• The IR receiver is made with a magnet.It is

detachable at the bottom (typical installation)

or back (wall installation) of the set.

• Make sure that you unplug the power cord

before connecting or removing the IR Receiver.

• Please turn off the power before removing the

cable. Connecting or removing the speaker

cable while turned on may result in no sound.

NOTE

15

ASSEMBLY AND PREPARATION

ENGLISH

Portrait Layout

When installing in a portrait layout, rotate the

monitor counterclockwise 90 degrees (when facing

the screen).

(This is not available for all models.)

The Kensington security system connector is

located at the back of the monitor. For more

information on installation and use of this system,

refer to the manual provided with the Kensington

security system or visit

http://www.kensington.

com

.

Connect the Kensington security system cable

between the monitor and a table.

Using Kensington Lock

• The Kensington security system is optional. You

can obtain additional accessories from most

electronics retail stores.

NOTE

16

ASSEMBLY AND PREPARATION

ENGLISH

1 Lay a clean cloth on the floor, and then put the

monitor on it with the screen face down. Using

a screwdriver, remove the screw that secures

the LG Logo Bracket to the bottom rear of the

monitor.

2

After removing the screw, remove the LG Logo.

When re-attaching the LG Logo, repeat the process

in reverse order.

1 Lay a clean cloth on the floor, and then put the

monitor on it with the screen face down. Using

a screwdriver, remove the screw that secures

the LG Logo Bracket to the bottom rear of the

monitor.

2

After removing the screw, remove the LG Logo.

Attach the LG Logo Bracket with a screw, aligning it

with the hole on the right side.

LG Logo Bracket

Attaching and removing the LG Logo Bracket

- For certain models only.

- The image may be different according to the model.

Removing the LG Logo Attaching the LG Logo on the right side

17

ASSEMBLY AND PREPARATION

ENGLISH

• Disconnect the power cord before moving or

installing the monitor to avoid risk of electric

shock.

• If you install the monitor on a ceiling or slanted

wall, it may fall and result in injury. Use an

authorized LG wall mount and contact your

local dealer or qualified personnel to assist with

the installation.

• Do not over tighten the screws as this may

damage the monitor and void your warranty.

• Use only screws and wall mounting brackets

that meet the VESA standard. Any damage or

injuries caused by misuse or use of improper

accessories are not covered by the warranty.

• To prevent injury, this apparatus must be

securely attached to the wall in accordance

with the installation instructions. (This pertains

only to Australia and New Zealand.)

• The wall mount kit includes the installation

guide and all necessary parts.

• The wall mounting bracket is optional. You can

obtain additional accessories from your local

dealer.

• The length of screws required may differ

depending on the wall mount. Be sure to use

the correct length.

• For more information, please refer to the guide

provided with the wall mount.

• The warranty will not cover any damages

caused by using the product in an excessively

dusty environment.

Installing on a Wall

For proper ventilation, allow a clearance of 10

cm on each side and from the wall. Detailed

installation instructions are available from your

dealer, see the optional Tilt Wall Mounting Bracket

Installation and Setup Guide.

To install your monitor on a wall, attach a wall

mounting bracket (optional part) to the back of the

monitor.

Make sure that the wall mounting bracket is

securely fixed to the monitor and to the wall.

1 Use only screws and wall mounting brackets

that conform to VESA standards.

2 Screws which are longer than standard length

may damage the inside of the monitor.

3 A non-VESA standard screw may damage

the product and cause the monitor to fall. LG

Electronics is not liable for any accidents related

to the use of non-standard screws.

4 Please use VESA standard as below.

• 785 mm and above

* Fixing screws: Diameter 6.0 mm x Pitch

1.0 mm x Length 12 mm

10 cm

CAUTION

NOTE

785 mm

18

ASSEMBLY AND PREPARATION

ENGLISH

Securing the monitor to a wall (optional)

Procedure may differ depending on the model.

1 Insert and tighten the eyebolts, or brackets and

bolts on the back of the monitor.

- If there are already bolts inserted in the

eyebolts’ position, remove the other bolts first.

2 Mount the wall brackets with the bolts to the

wall. Match the location of the wall bracket and

the eyebolts on the rear of the monitor.

3 Connect the eyebolts and wall brackets tightly

with a sturdy cord.

Make sure the securing cord is horizontal with

the flat surface.

• If the monitor is not positioned in a

sufficiently stable location, there is a danger

that it will fall. Many injuries, particularly to

children, can be avoided by taking simple

precautions such as:

►» Using cabinets or stands recommended

by the manufacturer.

►» Only using furniture that can safely

support the monitor.

►» Ensuring the monitor is not overhanging

the edge of the supporting furniture.

►» Not placing the monitor on tall furniture

(for example, cupboards or bookcases)

without anchoring both the furniture and

the monitor to a suitable support.

►» Not placing cloth or other materials

between the monitor and supporting

furniture.

►» Educating children about the dangers

of climbing on furniture to reach the

monitor or its controls.

• Make sure that children do not climb on or

hang from the monitor.

CAUTION

• Use a platform or cabinet that is large and

strong enough to support the monitor securely.

• Brackets, bolts, and cords are sold separately.

You can obtain additional accessories from your

local retail store.

• The illustration shows a general example of

installation and may look different from the

actual product.

NOTE

WARNING

19

REMOTE CONTROL

ENGLISH

ID

BACK

TILE

ON

OFF

EXIT

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control. Please read this manual

carefully to use the monitor correctly.

To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the

labels inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual

accessories.

• Do not mix old and new batteries, as this may

damage the remote control.

• Be sure to point the remote control toward the

remote control sensor on the monitor.

CAUTION

(POWER) Turns the monitor on or off.

MONITOR ON Turns the monitor on.

MONITOR OFF Turns the monitor off.

ENERGY SAVING( ) Adjusts the brightness of the picture to reduce

energy consumption.

INPUT Selects the input mode.

3D Used for viewing 3D videos. (This model does not support this.)

1/a/A Toggles between numerical and alphabetical.

(Depending upon the model, this feature may not be supported.)

Number and Alphabet buttons

Enters numerical or alphabetical characters depending upon the setting.

(Depending upon the model, this feature may not be supported.)

CLEAR Deletes the entered numerical or alphabetical character.

(Depending upon the model, this feature may not be supported.)

Volume Up/Down Button Adjusts the volume.

ARC Selects the Aspect Ratio mode.

AUTO Automatically adjusts picture position and minimizes image

instability (available for RGB input only). (Depending upon the

model, this feature may not be supported.)

MUTE Mutes all sounds.

BRIGHTNESS Adjust the brightness by pressing the Up and Down

buttons on the remote control. In USB mode, the OSD

menu has the Page function to move to the next file list.

(Depending upon the model, this feature may not be

supported.)

20

REMOTE CONTROL

ENGLISH

PSM Selects the Picture Mode.

INFO Views the information of the currently program and the screen.

W.BAL Enters the White Balance menu.

SETTINGS Accesses the main menus or saves your input and exit menus.

S.MENU SuperSign menu key (Depending upon the model, this feature

may not be supported.)

Navigation Buttons Scrolls through menus or options.

OK Selects menus or options and confirms your input.

BACK Allows you to move back one step in the user interaction function.

EXIT Quit all OSD tasks and applications.

Allows you to control various multimedia devices to enjoy

multimedia simply by using the remote control through the

SimpLink menu. (Depending upon the model, this feature

may not be supported.)

TILE Selects the TILE Mode.

PICTURE ID ON/OFF When the Picture ID number matches the Set ID

number, you can control whichever monitor you

want in multi-display format.

USB Menu Control Buttons Controls media playback.

Page is loading ...

LG 32SE3B-B User manual

LG 32SE3B-B User manual

Related papers

Other documents