2. Computers & electronics
  3. TVs & monitors
  4. LCD TVs
  5. Haier
  6. L22P1
L22P1

Haier L22P1 User manual

  • Hello! I am an AI chatbot trained to assist you with the Haier L22P1 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What type of power supply does the Haier L22P1 TV require?
    What are the dimensions of the Haier L22P1 TV without the stand?
    What are the display resolution and aspect ratio of the Haier L22P1 TV?
    What types of video signals does the Haier L22P1 TV support?
    How many HDMI ports does the Haier L22P1 TV have?
    Does the Haier L22P1 TV have a built-in speaker?
    What is the power consumption of the Haier L22P1 TV?
    What is the weight of the Haier L22P1 TV without the stand?
Customer helpline:0845 604 0105
1
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
01 Safety warnings
Contents
01 Safety Warnings
Welcome ...................................................................................................................... 2
Important safety information ........................................................................................ 3
Safety notice ................................................................................................................ 4
Electrical connections .................................................................................................. 5
02 About your LCD TV
Get to know your TV .................................................................................................... 6
Get to know your remote control.................................................................................. 8
Setting Up Your LCD TV .............................................................................................. 9
Preparation of your TV ..............................................................................................10
03 Getting Started
Connecting a TV Cable or an Antenna .......................................................................11
Connecting a CI (Common Interface) Card ............................................................... 16
Connecting optional AV Equipment
Connecting an A/V Device with Composite Connector ....................................... 17
Connecting AV Equipment with YPbPr Connector .............................................. 18
Connecting AV Equipment with SCART Connector ............................................19
Connecting AV Equipment with HDMI Connector ...............................................20
Connecting AV Equipment with DVI Connector ..................................................21
Connecting a PC ................................................................................................. 22
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System ................ 23
04 Using the features
Using the Programme Guide ...........................................................................24
Customizing the PICTURE Settings ..................................................................27
Customizing the SOUND Settings .....................................................................30
Customizing the TIME Settings .........................................................................31
Customizing the OPTION Settings ....................................................................32
Customizing the CHANNEL Settings .................................................................34
Customizing the LOCK Settings ........................................................................36
05 Reference Sections
Troubleshooting ..............................................................................................38
Specication ..................................................................................................39
06 Product Guarantee
Product guarantee ..........................................................................................40
2
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
01 Safety Warnings
3
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
01 Safety warnings
4
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
5
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
01 Safety warnings
6
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
02 About your LCD TV
7
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
02 About your LCD TV
8
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
9
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
02 About your LCD TV
SETTING UP YOUR LCD TV
Follow the instructions below to install the TV stand:
Open the box, and make sure all necessary parts are in the box. The package
contains the LCD TV, screw(s) and stand.
How to install the TV Stand
Cover an even stable surface with a soft cloth. Place the LCD TV unit face-
down on the cloth. Fit the stand onto the bottom of the LCD TV unit as shown.
Secure the TV stand to the TV neck using the supplied screw(s).
10
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
11
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
03 Getting stanrted
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
75-ohm coaxial cable (round)
IEC-type connector
300-ohm twin-lead cable (flat)
Connecting a TV Cable or an Antenna
■ A 75-ohm system is generally a round cable (not included) with IEC-
type connector that can easily be attached to a terminal without
tools.
03 Getting Started
■ A 300-ohm system is a flat twin-lead cable (not included) that can
be attached to a 75-ohm terminal through a 300-75-ohm adapter
(not included).
12
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
300-ohm twin-
lead cable
300-ohm twin-
lead cable
75-ohm
coaxial cable
UHF
Antenna
VHF
Antenna
Combiner
(not included)
A. Combination VHF/UHF antenna
300-ohm twin-
lead cable
75-ohm
coaxial cable
VHF/UHF
Antenna
VHF/UHF
Antenna
300/75-ohm adapter
(not included)
B. Separate VHF and/or UHF antennas
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
OUT
IN
13
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
03 Getting stanrted
A
IN
B
OUT
Cable TV Line
2 set signal
splitter
(not included)
RF switch
(not included)
Cable TV converter/
descrambler
(not included)
Cable TV (CATV) Connection
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■ Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
■ A 75-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the 75-ohm coaxial cable to the set, connect the 75-
ohm cable into the ANT. terminal.
■ Some cable TV companies offer premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
FormorespecicinstructionsoninstallingcableTV,consultyourcableTVcompany.
One possible method of connecting the converter/descrambler provided by your cable TV
company is shown in the diagram below.
VHF/UHF IN
14
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE
terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet. Switch power switch to the on () position.
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the power outlet when the LCD TV
will not be used for a long period of time.
The POWER button on the front panel is only used for switching the LCD
TV into standby, it does not disconnect the device from the main voltage.
To completely disconnect the main voltage, please remove the power
plug from the socket.
Press the INPUT button on the remote to display the Source List. Use the ▲▼ buttons to
select DTV or TV, and press the OK button.
TV CABLE
VHF/UHF IN
15
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
03 Getting stanrted
Initial Setup
Language English ◄►
Country UK ◄►
AutoTuning ►
Is the aerial plugged in?
EXIT OK
Channel Tuning
TV : 0 programmes(s)
DTV : 0 programmes(s)
Radio : 0 programmes(s)
Press <Menu> to skip
Press <Exit> to exit
69 %... UHF CH40 DTV
EXIT
WhenyouswitchontheTVforrsttime,theInitialSetupmenuappearsonthescreen.
Usethe◄►buttonstoselectthelanguagedisplayedonthemenu.
Press the ▼ button to select Country, and usethe◄►buttonsselect the country in
which you will operate the TV.
Press the ▼ button to select Auto Tuning and press the OK button.
The Auto Tuning automatically creates a list of receivable channels. Press the EXIT
button at any time to interrupt the memorization process. (The list cannot be created if
interrupted)
Channel List
EXIT OK
801 SZTVM01
800 SZTVM01
801 SZTVM01
78 BBC 7
30 CBBC Channel
728 Heart
Press OK button to display the received channels
and radio list, then press ▲▼ buttons to select a
channel or radio.
16
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
To view the scrambled (pay) services in digital TV mode.
This function enables you to watch the scrambled services (pay services) in some
channels. If you remove the CI Module, you can watch the available digital/analogue
programme in some channels.
Press the button on the remote to turn on the LCD TV.
Press the INPUT button on the remote to display the Source List. Use the ▲▼ buttons to
select DTV, and press the OK button.
If the CI card is inserted properly, the CAM menu will be displayed on screen, The
contents are dependent on the CAM provider in you country.
TO INSERT A CI CARD
InserttheCIcardintotheslotinthedirectionofthearrowuntilitts.
TO REMOVE A CI CARD
When removing the CI card, do pull it from its slot.
CAM
Connects CI(Common
Interface) card
Connecting a CI (Common Interface)
17
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
03 Getting stanrted
HDMI IN
L R
L R
VGA IN
VGA LINE IN
SCART
VIDEO IN
EARPHONE
AC POWER
SWITCH
AC IN 100-240V
50/60Hz
COAXIAL
YPbPr IN
AUDIO IN
AUDIO IN
Y Pb
Pr
VHF/UHF IN
Rear of TV
Connecting an A/V Device with Composite Connector
Use a composite cable to connect the external A/V device’s composite video/audio jacks to
the LCD TV’s VIDEO IN jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To view the A/V device’s with component input, press INPUT button on the remote remote,
thenusing▲or▼buttonontheremotetoselect VIDEO1(AV), then press OK button.
GAME CONSOLE
DVD PLAYER
Not all A/V devices have the ability to connect to a TV. Please check your A/V devices
user guide for compatibility.
AUDIO Cable
L
R
VIDEO OUT
AV Cable
18
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
HDMI IN
L R
L R
VGA IN
VGA LINE IN
SCART
VIDEO IN
EARPHONE
AC POWER
SWITCH
AC IN 100-240V
50/60Hz
COAXIAL
YPbPr IN
AUDIO IN
AUDIO IN
Y Pb
Pr
VHF/UHF IN
Rear of TV
GAME CONSOLE
DVD PLAYER
Connecting an A/V Device with Component(YPbPr) Connector
Pr
Cr
Pb
Cb
COMPONENT Cable
Use a component cable to connect the external A/V device’s component output jacks to the
LCD TV’s YPbPr IN input jacks.
Use an audio cable to connect the external A/V device’s component audio jacks to the LCD
TV’s audio input jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To view the A/V device’s with component input, press INPUT button on the remote remote,
thenusing▲or▼buttonontheremotetoselect VIDEO2(YPbPr) , then press OK
button.
Not all A/V device have the ability to connect to a TV. Please check your A/V
device user guide for compatibility.
The component video jacks on your A/V device are sometimes labeled YPbPr,
or YCbCr. For an explanation of component video, see your A/V device’s user
guide.
Pr/Cr
Pb/Pb
L
R
COMPONENT
OUT
Y
Pb
Pr
AUDIO Cable
19
ALBA HD Ready LCD TV User Manual Helpline: 0845 604 0105
03 Getting stanrted
HDMI IN
L R
L R
VGA IN
VGA LINE IN
SCART
VIDEO IN
EARPHONE
AC POWER
SWITCH
AC IN 100-240V
50/60Hz
COAXIAL
YPbPr IN
AUDIO IN
AUDIO IN
Y Pb
Pr
VHF/UHF IN
Rear of TV
Use a SCART cable to connect the external A/V device’s SCART socket to the LCD TV’s
SCART IN jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press INPUTbuttonontheremoteremote,thenusing▲or▼buttonontheremotetoselect
VIDEO3(SCART) , then press OK button.
Connecting an A/V Device with SCART Connector
SCART Cable
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/