Glacier Bay 67405-1008D2 Installation guide

THANK YOU

USE AND CARE GUIDE

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-855-HD-GLACIER

HOMEDEPOT.COM

Model #67405-1001

67405-1008D2

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

PULL-DOWN KITCHEN FAUCET

No-Tools Easy Installation System

Easy install mounting nuts

for deck plate and soap

dispenser:

Push up and hand-turn to

tighten

Easy install shank:

Push up and hand-turn to

tighten

REV.01YOW

2

Table of Contents

Safety Information ....................................2

Warranty ...................................................2

Pre-Installation .........................................2

Planning Installation ..............................2

Tools Required .......................................2

3Package Contents ..................................

Installation ................................................4

Operation...................................................7

Care and Cleaning ....................................8

Service Parts

...........................................

8

Safety Information

Please read and understand this entire manual before

attempting to assemble, operate, or install the product.

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD Glacier for

more details.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents section. If any part is missing or damaged, do not attempt to install the product.

TOOLS REQUIRED

Adjustable

wrench

Safety

goggles

SILICONE

Silicone (2) Supply lines

3

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1Faucet assembly

B 1

C Escutcheon 1

Easy install shank

D 1

E Shank 2

Base plate

K Weight clip 1

G 1

H Body assembly 1

I Easy install nuts 1

Pump

J 1Bottle

Part Description Quantity

F Easy install nuts 2

L Weights 1

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

A

B

C

D

E

F

G

H

I

J

K

L

4

Installation

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

1

Installing the faucet assembly

□ Shut off the water supply. Remove the old

faucet.

□ Insert the faucet body through the hole in the

sink.

NOTE: This step is for no escutcheon installation (optional).

If the escutcheon will be used, install the faucet assembly

as described in step 2.

2

Installing the escutcheon

□ Screw the shanks (E) into the escutcheon (C)

and ensure that the base plate (D) is pressed

onto the escutcheon (C) before the escutcheon

(C) is installed over the three holes in the sink.

□ From underneath sink, secure the escutcheon

to sink with the easy install nuts (F) provided.

Push up the easy install nuts (F) to sink and

hand-turn to tighten, as shown in the Fig 1.

NOTE: If the sink is uneven, use silicone under the base

plate (D).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

A

Push

up

Screw

F

D

E

C

F

Fig 1

Sink

5

Installation (continued)

3

Installing the faucet assembly

□ Insert the faucet assembly (A) through the hole

in the escutcheon (C).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 1.

4

Securing the faucet assembly

□ From underneath the sink, secure the faucet

assembly to the sink with the easy install

shank (B). Push the easy install shank (B) up over

the threads until it stops against the bottom of the

sink, then hand turn to tighten (Fig 1).

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

A

C

B

Sink

B

Sink

Fig 1

Push

up

Screw

6

Installation (continued)

5

Attaching the quick connector

to the receiving block

□ Push the quick connector (1) rmly upward and

attach it to the receiving block (2). Pull down

moderately to ensure the connection has been

made.

6

Installing the soap dispenser

□ Insert the body assembly (H) through the selected

hole in the sink. Secure body assembly to sink

with the easy install nuts (I) provided. Push the

easy install nuts (I) up to the underside of the

sink and hand-turn to tighten, as shown in

the Fig 1.

□ After connecting the hose, Install the weight

clip (K) at the lowest point of the hose (3).

Slide the weights (L) over the clip.

□ From under the sink, screw the bottle (J) onto the

body assembly (H) shank. Insert the pump (G) down

into the body assembly (H).

Weights

here

Weights

here

3

K

1

2

L

H

G

I

J

Sink

Push

up

Screw

Fig 1

I

HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

7

Installation (continued)

1

Flushing and checking for leaks

□ Pull the hose assembly out of the spout and

remove the spray head by unscrewing it from

the hose in a counterclockwise direction. Be

sure to hold the end of the hose down into the

sink and turn the faucet on to the warm position

where it mixes hot and cold water.

□ Flush the water lines for one minute. This ushes

away any debris that could cause damage to

internal parts. Check for leaks.

□ Re-tighten any connections if necessary, but do

not overtighten. Reinstall the spray head by hand

tightening it back onto the spray hose.

Operation

IMPORTANT: After installation is completed, turn on the

hot and cold water supplies. Check for leaks. Do not lose the

gasket (1) in the hose.

7

Making the waterline

connections

NOTE: The hot side inlet tube is indcated by a label.

If the label is not present, the hot supply tube is the longer

of the two inlet tubes.

□ Use 1/2 in. I.P.S. faucet connections (2), or use

supply line coupling nuts (3) (not included) with

a 3/8 in. O.D. ball-nose riser (1).

NOTE: Before tightening the faucet connector to the water

supply, apply a second wrench to the supply tube tting.

This will prevent the supply tube from moving or twisting

when tightening the faucet connector. Do not overtighten.

3

1

2

8

Remove the quick connector

□ If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Squeeze

2

Pull

down

1

8

Care and Cleaning

□

□ Do not use abrasive cleaners when cleaning this faucet.

Service Parts

*Specify Finish

Part Description Part Number

1 RP38202*

2 Washer RP64117

3 O-ring RP60075

5 Cartridge RP20005

6 Bonnet RP70304

7 Cap RP80132*

9 Handle RP13127*

10 Set screw RP50002

12 Rubber washer

RP64200

Spray head and Hose

15 O-ring RP60002

23 Easy install nuts RP56095

25 Flange kit RP46059*

26 Bottle RP46060

27 Soap dispenser RP46057*

Part Description Part Number

13 Easy install shank RP56096

14 Block

RP70421

16

Quick connect

assembly

RP70429

17 O-ring RP60089

18 Weight clip RP64204

19 Weights RP70441

20 Escutcheon RP80411*

21 Base plate RP80301

22 RP70440

Shank

24 Pump kit RP46058*

4 Ring RP60076

8 Screw RP50015

11 Handle seat RP17130*

27

26

25

24

23

22

21

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-855-HD-GLACIER

HOMEDEPOT.COM

Retain this manual for future use.

Page is loading ...

24

Installation (suite)

5

Attacher le raccord à

branchement rapide au bloc

récepteur

□ Poussez fermement le raccord à branchement

rapide (1) vers le haut et attachez-le au bloc

récepteur (2). Tirez modérément vers le bas pour

vous assurer que le branchement est bien fait.

6

Installing the soap dispenser

□ Insert the body assembly (H) through the selected

hole in the sink. Secure body assembly to sink

with the easy install nuts (I) provided. Push the

easy installation nut (I) up to the underside of the

sink and hand-turn to tighten, as shown in

the Fig 1.

□ Après avoir branché le tuyau exible, installez la

pince lestée (K) au point le plus bas du tuyau

exible (3). Faites glisser le poids (L) par-dessus

la pince.

□ From under the sink, screw the bottle (J) onto the

body assembly (H) shank. Insert the pump (G) down

into the body assembly (H).

Weights

here

Weights

here

3

K

1

2

L

H

G

I

J

Fig 1

I

Vis

Poussez

vers le

haut

Lavabo

Page is loading ...

Glacier Bay 67405-1008D2 Installation guide

This manual is also suitable for

Glacier Bay 67405-1008D2 Installation guide

in other languages

Related papers

Other documents