Glacier Bay 67405-1001 Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

THANK YOU
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-GLACIER
HOMEDEPOT.COM
Model #67405-1001
67405-1008D2
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
PULL-DOWN KITCHEN FAUCET
No-Tools Easy Installation System
Easy install mounting nuts
for deck plate and soap
dispenser:
Push up and hand-turn to
tighten
Easy install shank:
Push up and hand-turn to
tighten
REV.01YOW
2
Table of Contents
Safety Information ....................................2
Warranty ...................................................2
Pre-Installation .........................................2
Planning Installation ..............................2
Tools Required .......................................2
3Package Contents ..................................
Installation ................................................4
Operation...................................................7
Care and Cleaning ....................................8
Service Parts
...........................................
8
Safety Information
Please read and understand this entire manual before
attempting to assemble, operate, or install the product.
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD Glacier (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD Glacier for
more details.
Pre-Installation
PLANNING INSTALLATION
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents section. If any part is missing or damaged, do not attempt to install the product.
TOOLS REQUIRED
Adjustable
wrench
Safety
goggles
SILICONE
Silicone (2) Supply lines
3
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A 1Faucet assembly
B 1
C Escutcheon 1
Easy install shank
D 1
E Shank 2
Base plate
K Weight clip 1
G 1
H Body assembly 1
I Easy install nuts 1
Pump
J 1Bottle
Part Description Quantity
F Easy install nuts 2
L Weights 1
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
A
B
C
D
E
F
G
H
I
J
K
L
4
Installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
1
Installing the faucet assembly
Shut off the water supply. Remove the old
faucet.
Insert the faucet body through the hole in the
sink.
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 2.
2
Installing the escutcheon
Screw the shanks (E) into the escutcheon (C)
and ensure that the base plate (D) is pressed
onto the escutcheon (C) before the escutcheon
(C) is installed over the three holes in the sink.
From underneath sink, secure the escutcheon
to sink with the easy install nuts (F) provided.
Push up the easy install nuts (F) to sink and
hand-turn to tighten, as shown in the Fig 1.
NOTE: If the sink is uneven, use silicone under the base
plate (D).
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
A
Push
up
Screw
F
D
E
C
F
Fig 1
Sink
Sink
5
Installation (continued)
3
Installing the faucet assembly
Insert the faucet assembly (A) through the hole
in the escutcheon (C).
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
4
Securing the faucet assembly
From underneath the sink, secure the faucet
assembly to the sink with the easy install
shank (B). Push the easy install shank (B) up over
the threads until it stops against the bottom of the
sink, then hand turn to tighten (Fig 1).
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
A
C
B
Sink
B
B
Sink
Fig 1
Push
up
Screw
6
Installation (continued)
5
Attaching the quick connector
to the receiving block
Push the quick connector (1) rmly upward and
attach it to the receiving block (2). Pull down
moderately to ensure the connection has been
made.
6
Installing the soap dispenser
Insert the body assembly (H) through the selected
hole in the sink. Secure body assembly to sink
with the easy install nuts (I) provided. Push the
easy install nuts (I) up to the underside of the
sink and hand-turn to tighten, as shown in
the Fig 1.
After connecting the hose, Install the weight
clip (K) at the lowest point of the hose (3).
Slide the weights (L) over the clip.
From under the sink, screw the bottle (J) onto the
body assembly (H) shank. Insert the pump (G) down
into the body assembly (H).
Weights
here
Weights
here
3
K
1
2
L
H
G
I
J
Sink
Sink
Push
up
Screw
Fig 1
I
HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
7
Installation (continued)
1
Flushing and checking for leaks
Pull the hose assembly out of the spout and
remove the spray head by unscrewing it from
the hose in a counterclockwise direction. Be
sure to hold the end of the hose down into the
sink and turn the faucet on to the warm position
where it mixes hot and cold water.
Flush the water lines for one minute. This ushes
away any debris that could cause damage to
internal parts. Check for leaks.
Re-tighten any connections if necessary, but do
not overtighten. Reinstall the spray head by hand
tightening it back onto the spray hose.
Operation
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose the
gasket (1) in the hose.
7
Making the waterline
connections
NOTE: The hot side inlet tube is indcated by a label.
If the label is not present, the hot supply tube is the longer
of the two inlet tubes.
Use 1/2 in. I.P.S. faucet connections (2), or use
supply line coupling nuts (3) (not included) with
a 3/8 in. O.D. ball-nose riser (1).
NOTE: Before tightening the faucet connector to the water
supply, apply a second wrench to the supply tube tting.
This will prevent the supply tube from moving or twisting
when tightening the faucet connector. Do not overtighten.
3
1
2
8
Remove the quick connector
If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
Squeeze
2
Pull
down
1
1
1
8
Care and Cleaning
Do not use abrasive cleaners when cleaning this faucet.
Service Parts
*Specify Finish
Part Description Part Number
1 RP38202*
2 Washer RP64117
3 O-ring RP60075
5 Cartridge RP20005
6 Bonnet RP70304
7 Cap RP80132*
9 Handle RP13127*
10 Set screw RP50002
12 Rubber washer
RP64200
Spray head and Hose
15 O-ring RP60002
23 Easy install nuts RP56095
25 Flange kit RP46059*
26 Bottle RP46060
27 Soap dispenser RP46057*
Part Description Part Number
13 Easy install shank RP56096
14 Block
RP70421
16
Quick connect
assembly
RP70429
17 O-ring RP60089
18 Weight clip RP64204
19 Weights RP70441
20 Escutcheon RP80411*
21 Base plate RP80301
22 RP70440
Shank
24 Pump kit RP46058*
4 Ring RP60076
8 Screw RP50015
11 Handle seat RP17130*
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-GLACIER
HOMEDEPOT.COM
Retain this manual for future use.
24
Installation (suite)
5
Attacher le raccord à
branchement rapide au bloc
récepteur
Poussez fermement le raccord à branchement
rapide (1) vers le haut et attachez-le au bloc
récepteur (2). Tirez modérément vers le bas pour
vous assurer que le branchement est bien fait.
6
Installing the soap dispenser
Insert the body assembly (H) through the selected
hole in the sink. Secure body assembly to sink
with the easy install nuts (I) provided. Push the
easy installation nut (I) up to the underside of the
sink and hand-turn to tighten, as shown in
the Fig 1.
Après avoir branché le tuyau exible, installez la
pince lestée (K) au point le plus bas du tuyau
exible (3). Faites glisser le poids (L) par-dessus
la pince.
From under the sink, screw the bottle (J) onto the
body assembly (H) shank. Insert the pump (G) down
into the body assembly (H).
Weights
here
Weights
here
3
K
1
2
L
H
G
I
J
Fig 1
I
Vis
Poussez
vers le
haut
Lavabo
Lavabo
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27

Glacier Bay 67405-1001 Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI