Pleasant Hearth 238-04-48M Installation guide

Brand: Pleasant Hearth

Model: 238-04-48M

Category: Storage chests & cabinets & trunks

Type: Installation guide

Warming Your Home. Warming Your Heart. raW imr gni oY ruo H emo e aW mra gni Yg ruoY Hr aeH tr raW imr gni oY ruo H emo .e aW mra gni Yg ruoY Hr aeH .tr

302(33/('+$$.4(,)/2+2(%/6

 

8280 Austin Avenue

Morton Grove, IL 60053

877-447-4768

Questions, problems, missing parts? Before returning to your retailer,

call our customer service department at 1-877-447-4768,

8:30 a.m.-4:30 p.m., CST, Monday-Friday.

Printed in China

20-10-161

    #  

A Top Panel 1 20-12-254

B Top Shelf 1 20-12-255

C Adjustable Shelf 2 20-12-256

D Base 1 20-12-257

E Left Side Panel 1 20-12-258

F Right Side Panel 1 20-12-259

G Left Inner Panel 1 20-12-260

H Right Inner Panel 1 20-12-261

J Support Leg 1 20-12-262

K Upper Back Panel 1 20-12-263

L Lower Back Panel 2 20-12-264

M Cabinet Door 2 20-12-265



  

"

Bolt Washer Dowel Screw Hinge Screw Shelf-pin Handle Screw

Qty. 21 Qty. 21 Qty. 20 Qty. 34 Qty. 4 Qty. 16 Qty. 8 Qty. 2 Qty. 2



Carefully remove all pieces from carton and

make sure that you have all parts listed (refer

to parts list on page 1).

If you are missing parts, please call GHP

customer service at 1-877-447-4768.

 Attach support leg (J) to base (D) with bolt

(AA) and washer (BB) through predrilled holes

as illustrated.

 Set base (D) upright and insert 4 dowels (CC)

into pre-drilled holes in base (D). Slip left inner

panel (G) over dowels on the left side. Slip right

inner panel (H) over dowels on right side. Make

sure both panels are snug, then secure with

washers (BB) and bolts (AA) inserted through

pre-drilled holes as illustrated.

Tighten with screwdriver.

 Assemble top shelf (B) and side panels (E

and F) by inserting dowels (CC) into each end of

top shelf (B) as illustrated. Slip left side panel

(E) over dowels (CC) and secure with bolts

(AA) and washers (BB). Repeat using right side

panel (F). Tighten all bolts with screwdriver.



 Insert dowels (CC) into predrilled holes in top

edge of left and right inner panels (G and H).

Insert dowels (CC) into predrilled holes in base

(D). Slip top shelf/side assembly over dowels

(CC) until assembly sits snugly on base (D).

Insert bolts (AA) through washers (BB) through

predrilled holes in inner panel glue blocks, and

into predrilled holes in top shelf (B) as illustrated.

Tighten with screwdriver.

 Insert dowels (CC) into predrilled holes in top

edge of side panels. Slip top panel (A) over

dowels (CC) and onto mantle assembly. From

underneath, insert bolts (AA) through washers

(BB) and into pre-drilled holes as illustrated.

Tighten with screwdriver.

 Attach upper back panel (K) and lower back

panels (L) to back of mantle assembly using

screws (DD) through predrilled holes as

illustrated. Tighten all screws with screwdriver.



# " #

If within one year from the date of original purchase, this item fails due to a defect in material or

workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain warranty

service, call 1-877-447-4768, Monday - Friday, 8:30 a.m. - 4:30 p.m. CST. This warranty does not

cover defects resulting from improper or abnormal use, misuse, accident, or alteration. Failure to fol-

low all instructions in the owner’s manual will also void this warranty. GHP Group, Inc. will not be liable

for incidental or consequential damages. Some states do not allow the exclusion or limitation of inci-

dental or consequential damages, so the above limitation or exclusion of incidental or consequential

damages may not apply to you. This warranty gives you specific legal rights and you may also have

other rights which vary from state to state.

GHP Group, Inc. • 8280 Austin Avenue • Morton Grove, IL 60053

5HWH4HU[LS

 Attach hinges (EE) to mantle assembly and

cabinet door (M) with screws (FF) as

illustrated. Note: Once the mantle is in

position, align cabinet doors (M) by turning

hinge adjustment screw left or right until

cabinet door hangs squarely.

Attach handles (HH) to cabinet doors (M) with

screws (JJ). Insert shelf pins (GG) at

preferred shelf heights inside mantle and lay

shelves (C) on top of shelf pins (GG).

Page is loading ...

Pleasant Hearth 238-04-48M Installation guide

Brand: Pleasant Hearth

Model: 238-04-48M

Category: Storage chests & cabinets & trunks

Type: Installation guide

Download PDF

report

in other languages

français: Pleasant Hearth 238-04-48M Guide d'installation
español: Pleasant Hearth 238-04-48M Guía de instalación

Pleasant Hearth 238-04-48M Installation guide

Pleasant Hearth 238-04-48M Installation guide

in other languages

Related papers

Other documents