Yamaha YDP-C71 Owner's manual

Category
Keyboards
Type
Owner's manual

This manual is also suitable for

YDP-C71
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
ENGLISHDEUTSCHFRANÇAISESPAÑOL FRANÇAIS
Weitere Informationen über die Montage des Keyboard-Ständers erhalten Sie in den Anweisungen am Ende dieses Handbuchs.
WICHTIG
Überprüfen Sie Ihren Netzanschluss —
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
IMPORTANT — Check your power supply —
Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage
selector may be provided on the bottom panel of the main keyboard unit near the power cord. Make sure that the voltage selector is set for the
voltage in your area. The voltage selector is set at 240V when the unit is initially shipped.
To change the setting use a "minus" screwdriver to rotate the selector dial so that the correct voltage appears next to the pointer on the panel.
Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux instructions à la fin de ce manuel.
IMPORTANT — Contrôler la source d'alimentation
Vérifiez que la tension spécifiée sur le panneau inférieur correspond à la tension du secteur. Dans certaines régions, l'instrument peut être équipé
d'un sélecteur de tension situé sur le panneau inférieur du clavier à proximité du cordon d'alimentation.
Vérifiez que ce sélecteur est bien réglé en fonction de la tension secteur de votre région. Le sélecteur de tension est réglé sur 240 V au départ
d'usine. Pour modifier ce réglage, utilisez un tournevis à lame plate pour tourner le sélecteur afin de mettre l'indication correspondant à la tension de
votre région vis à vis du repère triangulaire situé sur le panneau.
Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual.
IMPORTANTE — Verifique la alimentación de corriente
Asegúrese de que tensión de alimentación de CA de su area corresponde con la tension especificada en la placa de características del panel
inferior. En algunas zonas puede haberse incorporado un selector de tensión en el panel inferior de la unidad del teclado principal, cerca del cable
de alimentación. Asegúrese de que el selector de tensión esté ajustado a la tensión de su área. El selector de tension se ajusta a 240V cuando la
unidad sale de fábrica. Para cambiar el ajuste, emplee un destornillador de cabeza "recta" para girar el selector de modo que aparezca la tensión
correcta al lado del indicador del panel.
Vergewissern Sie sich, dass die Spannung in Ihrem örtlichen Stromnetz mit der Spannung übereinstimmt, die auf dem Typenschild auf der Unterseite des
Instruments angegeben ist. In bestimmten Regionen ist auf der Unterseite des Keyboards in der Nähe des Netzkabels ein Spannungswähler angebracht.
Vergewissern Sie sich, dass der Spannungswähler auf die Spannung Ihres lokalen Stromnetzes eingestellt ist. Dieser Spannungswähler ist bei Auslieferung
auf 240 V eingestellt. Sie können die Einstellung mit einem Schlitzschraubenzieher ändern. Drehen Sie dazu den Wählschalter, bis der Pfeil auf dem
Instrument auf die richtige Span
nung zeigt.
ES
FR
DE
EN
YDP-C71 Owner’s Manual
2
ENGLISH
Table of Contents
PRECAUTIONS ........................................ 5
About the Manuals................................. 7
Included Accessories .............................. 7
Panel Controls and Terminals ................ 8
Basic Operations
Setting Up .............................................. 9
Key Cover ......................................................................9
Music Rest .....................................................................9
Turning the Power On .................................................10
Using Headphones.......................................................11
Playing the Piano ................................. 12
Setting the Volume ......................................................12
Using the Pedals ..........................................................12
Using the Damper Resonance ......................................12
Using the Metronome..................................................13
Changing the Touch Sensitivity....................................14
Maintenance ........................................ 14
Advanced Operations
Playing Various Musical Instrument
Sounds (Voices).................................... 15
Selecting a Voice..........................................................15
Listening to the Demo Songs .......................................16
Adding Variations to the Sound (Reverb)......................17
Transposing the Pitch in Semitones ..............................18
Fine- tuning the Pitch ..................................................18
Layering Two Voices (Dual mode) ................................19
Song Playback and Practice ................. 20
Listening to 50 Preset Songs ........................................20
Practicing a One-Hand Part..........................................21
Recording Your Performance............... 22
Recording Your Performance........................................22
Changing the Initial Settings of the Recorded Song .....23
Deleting Recorded Data...............................................23
Data Maintained When Power is
Turned Off.............................................24
Backup file.............................................24
Initializing the Settings ........................24
Using the MIDI terminals .....................25
What’s MIDI ? ..............................................................25
What You Can Do With MIDI .......................................25
MIDI Functions......................................26
MIDI Transmit/Receive Channel ...................................26
Local Control On/Off ...................................................26
Program Change On/Off ............................................. 26
Control Change On/Off...............................................26
Appendix
Troubleshooting ...................................27
Keyboard Stand Assembly....................28
Specifications ........................................32
Index .....................................................33
3
ENGLISH
YDP-C71 Owner’s Manual
SPECIAL MESSAGE SECTION
PRODUCT SAFETY MARKINGS: Yamaha electronic
products may have either labels similar to the graphics
shown below or molded/stamped facsimiles of these
graphics on the enclosure. The explanation of these
graphics appears on this page. Please observe all cautions
indicated on this page and those indicated in the safety
instruction section.
See bottom of Keyboard enclosure for graphic symbol
markings.
The exclamation point within the
equilateral triangle is intended to
alert the user to the presence of
important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
The lightning flash with arrowhead
symbol, within the equilateral
triangle, is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electrical shock.
IMPORTANT NOTICE: All Yamaha electronic products are
tested and approved by an independent safety testing
laboratory in order that you may be sure that when it is
properly installed and used in its normal and customary
manner, all foreseeable risks have been eliminated. DO
NOT modify this unit or commission others to do so unless
specifically authorized by Yamaha. Product performance
and/or safety standards may be diminished. Claims filed
under the expressed warranty may be denied if the unit is/
has been modified. Implied warranties may also be
affected.
SPECIFICATIONS SUBJECT TO CHANGE: The
information contained in this manual is believed to be
correct at the time of printing. However, Yamaha reserves
the right to change or modify any of the specifications
without notice or obligation to update existing units.
ENVIRONMENTAL ISSUES: Yamaha strives to produce
products that are both user safe and environmentally
friendly. We sincerely believe that our products and the
production methods used to produce them, meet these
goals. In keeping with both the letter and the spirit of the
law, we want you to be aware of the following:
Battery Notice: This product MAY contain a small non-
rechargeable battery which (if applicable) is soldered in
place. The average life span of this type of battery is
approximately five years. When replacement becomes
necessary, contact a qualified service representative to
perform the replacement.
Warning: Do not attempt to recharge, disassemble, or
incinerate this type of battery. Keep all batteries away from
children. Dispose of used batteries promptly and as
regulated by applicable laws. Note: In some areas, the
servicer is required by law to return the defective parts.
However, you do have the option of having the servicer
dispose of these parts for you.
Disposal Notice: Should this product become damaged
beyond repair, or for some reason its useful life is
considered to be at an end, please observe all local, state,
and federal regulations that relate to the disposal of
products that contain lead, batteries, plastics, etc.
NOTICE: Service charges incurred due to lack of
knowledge relating to how a function or effect works (when
the unit is operating as designed) are not covered by the
manufacturer’s warranty, and are therefore the owners
responsibility. Please study this manual carefully and
consult your dealer before requesting service.
NAME PLATE LOCATION: The graphic below indicates
the location of the name plate. The model number, serial
number, power requirements, etc., are located on this
plate. You should record the model number, serial number,
and the date of purchase in the spaces provided below
and retain this manual as a permanent record of your
purchase.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Model
Serial No.
Purchase Date
92-469- 1 (bottom)
4
YDP-C71 Owner’s Manual
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel.
Serv
icing is required when the app
aratus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
(UL60065_03).
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifi-
cations not expressly approved by Yamaha may void your
authority, granted by the FCC, to use the product.
2.
IMPORTANT: When connecting this product to acces-
sories and/or another product use only high qu ality
shielded cables. Cable/s supplied with this product MUST
be used. Follow all installation instructions. Failure to follow
instructions could void your FCC authorization to use this
product in the USA.
3.
NOTE: This product has been tested and found to com-
ply with the requirements listed in FCC Regulations, Part
15 for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance
that your use of this product in a residential environment
will not result in harmful interference with other electronic
devices. This equipment generates/uses radio frequencies
and, if not installed and used according to the instructions
found in the users manual, may cause interference harmful
to the operation of other electronic devices. Compliance
with FCC regulations does
not guarantee that interference will not occur in all installa-
tions. If this product is found to be the source of interfer-
ence, which can be determined by tur
ning the unit “OFF”
and “ON”, please try to eliminate the problem by using one
of the following measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient
the antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to dis-
tribute this type of product. If you can not locate the appro-
priate retailer, please contact Yamaha Corporation of
America, Electronic Service Division, 6600 Orangethorpe
Ave, Buena Park, CA90620
The above statements apply ONLY to those products dis-
tributed by Yamaha Corporation of America or its subsid-
iaries.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO
RAIN OR MOISTURE.
ENGLISH
DMI-3 1/2
YDP-C71 Owner’s Manual
5
ENGLISH
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical
shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or radiators, and do
not excessively bend or otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip over, or roll anything over it.
Only use the voltage specified as correct for the instrument. The required voltage is
printed on the name plate of the instrument.
Use only the supplied power cord/plug.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
This instrument contains no user-serviceable parts. Do not open the instrument or
attempt to disassemble or modify the internal components in any way. If it should
appear to be malfunctioning, discontinue use immediately and have it inspected by
qualified Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet conditions,
place on it any containers (such as vases, bottles or glasses) containing liquids
which might spill into any openings. If any liquid such as water seeps into the
instrument, turn off the power immediately and unplug the power cord from the AC
outlet. Then have the instrument inspected by qualified Yamaha service personnel.
Never insert or remove an electric plug with wet hands.
Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
When one of the following problems occur, immediately turn off the power switch
and disconnect the electric plug from the outlet. Then have the device inspected by
Yamaha service personnel.
•The power cord or plug becomes frayed or damaged.
•It emits unusual smells or smoke.
•Some object has been dropped into the instrument.
•There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage
to the instrument or other property. These precautions include, but are not limited to, the following:
Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the
outlet.
When removing the electric plug from the instrument or an outlet, always hold the
plug itself and not the cord. Pulling by the cord can damage it.
Remove the electric plug from the outlet when the instrument is not to be used for
extended periods of time, or during electrical storms.
Read carefully the attached documentation explaining the assembly process. Failure
to assemble the instrument in the proper sequence might result in damage to the
instrument or even injury.
Do not place the instrument in an unstable position where it might accidentally fall
over.
When transporting or moving the instrument, always use two or more people.
Attempting to lift the instrument by yourself may damage your back, result in other
injury, or cause damage to the instrument itself.
Before moving the instrument, remove all connected cables.
When setting up the product, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power
switch and disconnect the plug from the outlet. Even when the power switch is
turned off, electricity is still flowing to the product at the minimum level. When you
are not using the product for a long time, make sure to unplug the power cord from
the wall AC outlet.
Before connecting the instrument to other electronic components, turn off the power
for all components. Before turning the power on or off for all components, set all
volume levels to minimum.
Be sure to set the volumes of all components at their minimum levels and gradually
raise the volume controls while playing the instrument to set the desired listening
level.
Power supply/Power cord
Do not open
Water warning
Fire warning
If you notice any abnormality
Power supply/Power cord
Assembly
Location
Connections
YDP-C71 Owner’s Manual
6
ENGLISH
DMI-3 2/2
Do not insert a finger or hand in any gaps on the key cover or instrument. Also take
care that the key cover does not pinch your finger.
Never insert or drop paper, metallic, or other objects into the gaps on the key cover,
panel or keyboard. This could cause physical injury to you or others, damage to the
instrument or other property, or operational failure.
Do not rest your weight on, or place heavy objects on the instrument, and do not use
excessive force on the buttons, switches or connectors.
Do not use the instrument/device or headphones for a long period of time at a high
or uncomfortable volume level, since this can cause permanent hearing loss. If you
experience any hearing loss or ringing in the ears, consult a physician.
Do not place the bench in an unstable position where it might accidentally fall over.
Do not play carelessly with or stand on the bench. Using it as a tool or stepladder or
for any other purpose might result in accident or injury.
Only one person should sit on the bench at a time, in order to prevent the possibility
of accident or injury.
If the bench screws become loose due to extensive long-term use, tighten them
periodically using the included tool.
Always turn the power off when the instrument is not in use.
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the
notices below.
Handling and Maintenance
Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility of panel disfiguration, damage to the internal components or
unstable operation. (Verified operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
Bumping the surface of the instrument with metal, porcelain, or other hard objects can cause the finish to crack or peel.
Use caution.
Saving data
Saved data may be lost due to malfunction or incorrect operation. Save important data to external device such as a
computer (see online manual, Computer-related Operations).
Information
About copyrights
Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with
respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all
computer software, style files, MIDI files, WAVE data, musical scores and sound recordings. Any unauthorized use of
such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has
legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.
About functions/data bundled with the instrument
Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.
About this manual
The illustrations as shown in this manual are for instructional purposes only, and may appear somewhat different from
those on your instrument.
The company names and product names in this manual are the trademarks or registered trademarks of their respective
companies.
Handling caution
Using the bench (If included)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
YDP-C71 Owner’s Manual
7
ENGLISH
About the Manuals
This instrument has the following manuals.
Included Manuals
Owner’s Manual (this book)
Explains how to use the instrument.
Quick Operation Guide (separate sheet)
Shows in chart form the functions assigned to the buttons and the keyboard for quick understanding.
Online Manuals (PDF)
Computer-related Operations
Includes instructions on connecting this instrument to a computer, and operations related to transferring song
data.
MIDI Reference
Contains the MIDI Data Format and MIDI Implementation chart.
MIDI Basics (only in English, French and German)
Contains basic explanations about MIDI.
To obtain these manuals, access the Yamaha Manual Library, enter “YDP-C71” or “MIDI Basics” to the Model
Name box, then click [SEARCH].
Included Accessories
*1 The PRODUCT ID on the sheet is required for filling out the User Registration form.
*2 Included or optional depending on locale.
Yamaha Manual Library
http://www.yamaha.co.jp/manual/
Thank you for choosing the Yamaha ARIUS.
In order to make the most of the performance potential and features of the instrument,
please read the manuals thoroughly, and keep them in a handy place for later reference.
Owner’s Manual (this book)
Quick Operation Guide (separate sheet)
“50 greats for the Piano” (music book)
Online Member Product Registration*
1
Bench*
2
AC Power Cord
YDP-C71 Owner’s Manual
8
ENGLISH
Panel Controls and Terminals
PHONES
MIDI
INOUT
PEDAL
Rear side
Higher key side
Lower key side
Keyboard side
Keyboard side
[ ] Power switch ................................ page 10
Turns the power on ( ) or off ( ).
[DEMO/SONG] button .................. pages 16, 20
For playing the Demo Songs and the Preset Songs.
[PIANO/VOICE] button ............pages 15, 17, 19
For selecting a single Voice, two Voices for layering or
a Reverb Type.
[METRONOME] button......................... page 13
For using the metronome.
[+ R], [– L] buttons ................pages 15, 18, 21
Normally, for selecting the next or previous Voice.
During Song playback, for selecting the next or
previous Song, and (while holding down [PLAY])
turning on/off the Right-hand and Left-hand Parts
individually.
During Metronome playback, for increasing or
decreasing the Tempo.
[REC] button......................................... page 22
For recording your keyboard performance.
[PLAY] button ....................................... page 23
For playing back the recorded performance.
[MASTER VOLUME] knob.................... page 12
For adjusting the volume of the entire sound.
[FUNCTION] .................................pages 18, 26
Simultaneously holding these two buttons and
pressing the specified key sets will set the MIDI or
Transpose parameters.
[PHONES] jacks ....................................page 11
For connecting a set of standard stereo headphones.
MIDI IN/OUT terminals..........................page 25
For connecting to an external MIDI instrument.
[PEDAL] jack .........................................page 30
For connecting the Pedal Cord.
[AC IN] jack............................................page 10
For connecting the included Power Cord.
Pedals ....................................................page 12
For controlling expression and sustain, just as on an
acoustic piano.
YDP-C71 Owner’s Manual
Basic Operations
9
ENGLISH
Setting Up
Key Cover
To open the key cover:
Lift the cover slightly, then push and slide it to the
end.
To close the key cover:
Slide the cover toward you and gently lower the
cover over the keys.
CAUTION
Hold the cover with both hands when opening or closing it. Do not release it until it is fully opened or closed. Be careful to
avoid catching fingers (yours or others, especially children’s) between the cover and main unit.
Do not place objects, such as a piece of metal or paper, on top of the key cover. Small objects placed on the key cover
may fall inside the unit when the cover is opened and may be nearly impossible to remove. This could cause electric
shock, short circuit, fire or other serious damage to the instrument.
Music Rest
To raise the music rest:
1 Pull the music rest up and toward yourself as
far as it will go.
2 Flip down the two metal supports at the rear
left and right of the music rest.
3 Lower the music rest so that it rests on the
metal supports.
To lower the music rest:
1 Pull the music rest toward yourself as far as it
will go.
2 Raise the two metal supports (at the rear of the
music rest).
3 Gently lower the music rest backward until it is
all the way down.
CAUTION
Do not try to use the music rest in a half-raised position. When lowering the music rest, do not release your hands from the
music rest until it is all the way down.
CAUTION
Be careful to avoid catching your fingers
when opening or closing the cover.
Basic Operations
10
YDP-C71 Owner’s Manual
ENGLISH
Turning the Power On
1 Connect the power cord.
First insert the plug of the power cable into the [AC IN] jack on your instrument, then plug the other end of the cable into
the proper AC outlet on the wall. For an illustration of the location of the [AC IN] jack, see “Panel Controls and
Terminals” (page 8). In some areas a plug adaptor may be provided to match the pin configuration of the AC wall
outlets in your area.
WARNING
Make sure your instrument is rated for the AC voltage supplied in the area in which it is to be used (voltage rating
appears on the name plate on the bottom panel). In some areas, a voltage selector may be provided on the bottom
panel of the main keyboard unit near the [AC IN] jack. Make sure that the voltage selector is set for the voltage in your
area. Connecting the unit to the wrong AC supply can cause serious damage to the internal circuitry and may even
pose a shock hazard!
Use only the AC power cord supplied with your instrument. If the supplied cord is lost or damaged and needs to be
replaced, contact your Yamaha dealer. The use of an inappropriate replacement can pose a fire and shock hazard!
The type of AC power cord provided with your instrument may be different depending on the country in which it is pur-
chased. Do NOT modify the plug provided with your instrument. If the plug does not fit the outlet, have a proper outlet
installed by a qualified electrician.
2 Press the [ ] power switch to turn the power on.
Power indicator
If you close the key cover without turning the power off, the power indicator remains lit, indicating that the power is still
on.
When you’re ready to turn off the power, press the power switch again. The power indicator turns off.
CAUTION
Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not
using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug from the wall AC
outlet.
The shape of the plug
differs depending on the
locale.
YDP-C71 Owner’s Manual
Basic Operations
11
ENGLISH
Using Headphones
Since this instrument is equipped with two [PHONES] jacks, you can
connect two sets of standard stereo headphones. If you are using only one
set of headphones, insert a plug into either jack, which automatically shuts
off the speakers.
CAUTION
Do not use headphones at a high volume for an extended period of time;
doing so may cause hearing loss.
Using the headphone hanger
You can hang the headphones on the instrument. Install the headphone
hanger using included two screws as shown in the illustration.
NOTICE
Do not hang anything other than the headphones on the hanger. Doing so may damage this instrument or the hanger.
PHONES
Standard stereo phone plug
Bottom surface
PHONES
Basic Operations
12
YDP-C71 Owner’s Manual
ENGLISH
Playing the Piano
Setting the Volume
When you start playing, use the [MASTER VOLUME] knob to adjust the volume of the entire keyboard sound.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Using the Pedals
NOTE
If the damper pedal doesn’t
work, make sure that the
pedal cord is properly
plugged into the main unit
(page 30).
NOTE
While the sostenuto pedal is
held, the organ and strings
Voices sound continuously
without decay after the notes
have been released.
Damper Pedal (Right)
Pressing this pedal will sustain notes longer. Releasing
this pedal immediately stops (damps) any sustained
notes. A “half-pedal” function of this pedal creates
partial sustain effects, depending on how far down you
press the pedal.
Sostenuto Pedal (Center)
Pressing this pedal while holding the notes will sustain
the pressed notes (as if the Damper Pedal had been
pressed), but all subsequently played notes will not be
sustained. This makes it possible to sustain a chord, for
example, while the other notes are played “staccato.”
Soft Pedal (Left)
Pressing this pedal will reduce the volume and slightly change the timbre of the notes. The
notes played before this pedal is pressed are not affected.
Using the Damper Resonance
When playing an actual grand piano, the strings resonate sympathetically, whether the damper pedal is pressed or not. The
Damper Resonance function recreates that effect.
Default setting:
OnTo turn on the Damper Resonance:
While holding [PIANO/VOICE], press the G#2 key.
To turn off the Damper Resonance:
While holding [PIANO/VOICE], press the G2 key.
Level
decreases.
Level
increases.
Half-pedal function
This function allows you to
vary the sustain length
depending on how far the
pedal is pressed. The
farther down you press the
pedal, the more the sound
sustains. For example, if
you press the damper pedal
and all notes you are
playing sound a bit murky
and loud with too much
sustain, you can release the
pedal half way to decrease
the sustain (murkiness)
When you press the damper
pedal here, this note and the
notes you play before you
release the pedal sustain longer.
When you press the sostenuto
pedal here while holding the
note, the note will sustain as
long as you hold the pedal.
Lowest key
G2
(Off)
G
2
(On)
YDP-C71 Owner’s Manual
Basic Operations
13
ENGLISH
Using the Metronome
The metronome feature is convenient for practicing with an accurate tempo.
1 Press [METRONOME] to start the Metronome.
2 Press [METRONOME] to stop the Metronome.
Default setting: 0 (C3)
Selecting a Beat
While holding down [METRONOME], press one of the C3-F3 keys.
Adjusting the Tempo
The Metronome tempo can be set from 32 to 280 beats per minute.
To increase or decrease the value by 1:
While the metronome is playing, press [+ R] to increase or [– L] to decrease.
Alternatively, press and hold down [METRONOME], and press the C
5 key to increase or
B4 key to decrease.
To increase or decrease the value by 10:
While holding down [METRONOME], press the D5 key to increase or the A
4 key to decrease.
To specify a three-digit value:
While holding down [METRONOME], press the relevant C4–A4 keys one by one in order.
For example to specify “95,” press the C4 (0), A4 (9) and F4 (5) keys in order.
Resetting the value to the default (120)
While holding down the [METRONOME], press the [+ R] and [– L] simultaneously, or
press the C5 (default) key.
Setting range:
C1 (1) ~ G2 (20)
Default setting:
A1 (10)
Adjusting the Volume
While holding down [METRONOME], press one of the keys between C1 and G2 to set the
volume. Pressing a higher key results in higher volume, while pressing a lower key results
in lower volume.
024579
8631
24 7
1356
9
11
8
10
12
14 16 19
15 17 18 2013
C
3
C3
Highest key
D
3
D3 E3 F3
A
4
C4
C
5
F4 A4
C5
D5B4Lowest key C1 G2
G
1
Adjusting
the Volume
Selecting a
Beat
Adjusting
the Tempo
Key Beat
C3 0
C
32
D3 3
D
34
E3 5
F3 6
Basic Operations
14
YDP-C71 Owner’s Manual
ENGLISH
Changing the Touch Sensitivity
You can specify the Touch Sensitivity (how the sound responds to the way you play the keys).
NOTE
This setting is disabled with
some Voices, such as an
organ sound.
Default setting:
B6 (Medium)
While holding down [PIANO/VOICE], press one of the A6-C7 keys.
Maintenance
To keep your ARIUS in optimum condition, we recommend that you periodically follow the maintenance points below.
Instrument and Bench Maintenance
When cleaning the instrument, use a soft, dry or slightly damp cloth.
NOTICE
Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Gently remove dust and dirt with a soft cloth. Do not wipe too hard since small particles of dirt can scratch the
instrument’s finish.
To keep the surface polished, apply commercially available piano polisher to a soft cloth and wipe the instrument’s
surface with it. Then, polish it with a separate cloth. Before using any piano polisher, make sure to read the instructions
for proper usage.
Tighten the screws of the instrument and bench periodically.
Pedal Cleaning
As with an acoustic piano, pedals may become tarnished over years of use. When this occurs, polish the pedal with a
compound designed for piano pedals. Before using the compound, make sure to read the instructions for proper usage.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned by an expert (although the pitch can be user-adjusted
to match other instruments). This is because the pitch of digital instruments is always maintained perfectly. However, if you
feel there is something abnormal concerning the keyboard touch, contact your Yamaha dealer.
When transporting
You can load this instrument onto a truck, either fully
assembled or disassembled. When doing so, do not lean
the instrument (especially the keyboard unit) against a
wall, and make sure to lay it horizontally in the truck. When
transporting by truck, do not subject the instrument to
excessive vibration or shock. If you transport the
instrument fully assembled, make sure to check all the
screws then tighten them as necessary.
A6 C7
B6
A
6
Key Touch Sensitivity Description
A6 Fixed
The volume level does not change at all regardless of whether you play the keyboard soft
or hard.
A
6SoftThe volume level does not change much when you play the keyboard soft or hard.
B6 Medium This is the standard piano touch response.
C7 Hard
The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic
and dramatic expression. You have to hit the keys hard to produce a loud sound.
YDP-C71 Owner’s Manual
Advanced Functions
15
ENGLISH
Playing Various Musical Instrument Sounds
(Voices)
Selecting a Voice
NOTE
To hear the characteristics of
the Voices, play back the
Demo Songs (page 16).
To select “Grand Piano 1”:
Simply press [PIANO/VOICE].
To select another Voice:
After pressing [PIANO/VOICE], press [+ R] or [– L] to select the next or previous Voice.
To select a specific Voice:
While holding down [PIANO/VOICE], press one of the C1–A1 keys. For details on which
Voice is assigned to each key, see the list below.
Voice List
To shift the Octave:
While holding down [PIANO/VOICE], press one of the C5-D5 keys.
C
1D
1F
1G
1
C1 D1 E1 F1 G1 A1
Lowest key
Key Voice Name Description
C1 Grand Piano 1 Recorded samples from a concert grand piano. Perfect for classical compositions.
C
1 Grand Piano 2 Spacious and clear piano with bright reverb. Good for popular music.
D1 E.Piano 1 Created by FM synthesis. Good for popular music.
D
1 E.Piano 2
Using hammer-struck metallic “tines.” Soft tone when played lightly, and an
aggressive tone when played hard.
E1 Harpsichord 1
The definitive instrument for baroque music. Since the strings of a harpsichord are
plucked, there is no touch response.
F1 Harpsichord 2 Mixes the same Voice an octave higher for a more brilliant tone.
F
1 Vibraphone Played with relatively soft mallets.
G1 Pipe Organ 1
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music
from the Baroque period.
G
1 Pipe Organ 2
This is the organ’s full coupler sound, often associated with Bach’s “Toccata and
Fugue.”
A1 Strings
Spacious and large-scale string ensemble. Try combining this Voice with Piano in
Dual mode (page 19).
-1 +1
0
C
5
C5
D5 Highest key
Advanced Functions
16
YDP-C71 Owner’s Manual
ENGLISH
Listening to the Demo Songs
NOTE
If you want to change the
playback tempo, see page 13.
Demo Songs are provided for each of the Voices such as Piano and Organ.
1 Press [DEMO/SONG] to start playback.
The [PLAY] lamp lights up, and the Demo Song for the current Voice starts.
Playback will continue in the sequence: Demo Songs for other Voices, then 50
Preset Songs (page 20). After that, the sequence returns to the first Demo Song
then repeats.
To change the Demo Song during playback:
Press the [+ R] or [– L] to change to the next or previous Demo Song. To change
to a specific Demo Song, press and hold down the [DEMO/SONG], then press one
of the C1 - A1 keys.
2 Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY] lamp turns off.
Demo Song List
The Demo Songs excluding original Songs are short rearranged excerpts from the original
compositions. The original Demo Songs are Yamaha originals (©2011 Yamaha
Corporation).
Key
Voice Name
Title Composer
C1 Grand Piano 1 Salut d’amour, op.12 E. Elgar
C
1 Grand Piano 2 Original Original
D1 E.Piano 1 Original Original
D
1 E.Piano 2 Original Original
E1 Harpsichord 1
Concerto a cembalo
obbligato, 2 violini, viola e
continuo No.7, BWV.1058
J.S.Bach
F1 Harpsichord 2
Gigue, Französische
Suiten Nr.5, BWV.816
J.S.Bach
F
1 Vibraphone Original Original
G1 Pipe Organ 1
Herr Christ, der ein’ge
Gottes-Sohn, BWV.601
J.S.Bach
G
1 Pipe Organ 2 Triosonate Nr.6, BWV.530 J.S.Bach
A1 Strings Original Original
Lowest key C1 F1 A1
YDP-C71 Owner’s Manual
Advanced Functions
17
ENGLISH
Adding Variations to the Sound (Reverb)
This instrument features several Reverb Types that add extra depth and expression to the sound to create a realistic
acoustic ambience. The appropriate Reverb Type and Depth are called up automatically when you select each of the
Voices and Songs. This is why the Reverb Type need not be selected; however, you can change it if desired.
NOTE
In Dual mode, the Reverb
Type of Voice 1 is called up. If
off is assigned to Voice 1, the
Reverb Type of Voice 2 is
called up.
To select a Reverb Type:
While holding down [PIANO/VOICE], press one of the C2–E2 keys.
Reverb Type List
To adjust Reverb Depth:
Reverb depth range:
0 (no effect) - 20 (maximum
depth)
While holding down [PIANO/VOICE], press one of the C3–G#4 keys. The Depth value
increases as you press higher keys.
While holding down [PIANO/VOICE], press the A4 key to set the Reverb Depth to the most
suitable value for the current Voice.
Lowest key C3: depth 0
G
4: depth 20
A4
The depth value increases as you
press higher keys.
C
2D
2
C2 D2 E2
Selecting a
Reverb Type
Adjusting
Reverb Depth
Highest key
Key Reverb Type Description
C2 Room
Adds a continuous reverb effect to the sound, similar to the
acoustic reverberation you would hear in a room.
C
2Hall1
For a “bigger” reverb sound, use the Hall1 setting. This effect
simulates the natural reverberation of a small-size concert
hall.
D2 Hall2
For a truly spacious reverb sound, use the Hall2 setting. This
effect simulates the natural reverberation of a large concert
hall.
D
2 Stage Simulates the reverb of a stage environment.
E2 Off No effect is applied.
Advanced Functions
18
YDP-C71 Owner’s Manual
ENGLISH
Transposing the Pitch in Semitones
You can shift the pitch of the entire keyboard up or down in semitones to facilitate playing in difficult key signatures and
match the pitch of the keyboard to the range of a singer or other instruments. For example, if “+5” is selected, playing key
C produces pitch F, letting you play a song of F major as though it were in C major.
To transpose the pitch down:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between F#2 (–6) and B2 (–1).
To transpose the pitch up:
While holding down [DEMO/SONG] and [PIANO/VOICE], press a key between C#3 (+1) and F#3 (+6).
To restore the normal pitch:
While holding down [DEMO/SONG] and [PIANO/VOICE], press the C3 key.
Fine tuning the Pitch
You can fine tune the pitch of the entire instrument in about 0.2 Hz steps. This lets you match the keyboard pitch finely to
that of other instruments or CD music.
Setting range:
427.0 – 453.0 Hz
Default Setting:
440.0 Hz
To tune up (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[+ R].
To tune down (in about 0.2 Hz steps):
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[– L].
To restore default pitch:
Press and hold down the [DEMO/SONG] and [PIANO/VOICE] simultaneously, and press
[+ R] and [– L] simultaneously.
-5 -3 -1 0 +2 +4 +5
-6 -4 -2 +1
+3 +6
F
2C3
Lowest key
F
3
Transpose down. Transpose up.
Normal pitch.
Hz (Hertz):
This unit of measurement
refers to the frequency of a
sound and represents the
number of times a sound
wave vibrates in a second.
YDP-C71 Owner’s Manual
Advanced Functions
19
ENGLISH
Layering Two Voices (Dual mode)
You can layer two Voices and play them simultaneously to create a more richly textured sound.
1 Engage Dual mode.
While holding down [PIANO/VOICE], simultaneously hold down two keys between C1 and A1 to select the two
desired Voices. For information what Voices are assigned to the keys, refer to “Voice List” (page 15).
The Voice assigned to the lower key will be designated as Voice 1, and the Voice
assigned to the higher key will be designated as Voice 2. You cannot assign the
same Voice to Voice 1 and Voice 2 simultaneously in Dual mode.
To shift the Octave for each Voice:
While holding down [PIANO/VOICE], press one of the C5-F5 keys.
To adjust the Balance between two Voices:
While holding down [PIANO/VOICE], press one of the F#5–F#6 keys.
A setting of “0” produces an equal balance between two Voices. Settings below “0”
increase the volume of Voice 2 while settings above “0” increase the volume of
Voice1, in relation to the other.
2 To exit from Dual mode, press [PIANO/VOICE].
-5
-60-4-2-1
+1 +3 +6
-3 -1-1 00+2+1 +1 +4 +5
C5 F5
Highest keyC1 F1 A1Lowest key
F
5C6 F
6
Engaging
Dual mode
Shifting
the Octave
Adjusting
the Balance
Voice 1
Voice 2
Advanced Functions
20
YDP-C71 Owner’s Manual
ENGLISH
Song Playback and Practice
Listening to 50 Preset Songs
In addition to the Demo Songs, Preset Songs are provided for your listening pleasure.
1 Find the number of the Song that you want to play back from
the included “50 greats for the Piano.”
The number of each piano Preset Song is assigned to the C2–C
6 keys.
NOTE
You can play the keyboard
along with the preset Song.
You can also change the Voice
playing on the keyboard.
2 While holding down [DEMO/SONG], press one of the C2–C#6
keys to start playback.
The [PLAY], [+ R] and [– L] lamps light, and playback continues the sequence:
other Preset Songs then Demo Songs. After that, the sequence returns to the first
Preset Song then repeats.
NOTE
For instructions on changing
the playback tempo, see
page 13.
NOTE
You can import additional
Songs by loading SMF files
from a computer. Refer to the
Computer-related Operations
manual.
To play only the Preset Songs consecutively:
While holding down [DEMO/SONG], press the D6 key.
To change the Preset Song during playback:
Press [+ R] or [– L] to change to the next or previous Preset Song.
3 Press [DEMO/SONG] or [PLAY] to stop playback.
The [PLAY], [+ R] and [– L] lamps turn off.
Highest
key (C7)
Consecutive
playback (D6)
Song No. 1
Song No. 10 Song No. 20 Song No. 30 Song No. 40
C3 C4 C5
C2
Song No. 50
(C
6)
1 / 1

Yamaha YDP-C71 Owner's manual

Category
Keyboards
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document