Sharper Image EC-B145 User manual

Brand: Sharper Image

Model: EC-B145

Category: Mobile device dock stations

Type: User manual

Page is loading ...

2 3

The perfect way to charge, play, and display your iPod | iPhone.

Thank you for purchasing The Sharper Image

Alarm Clock Dock for iPod/iPhone. This

product, along with entire The Sharper Image

collection, connects high-tech innovation

with design to provide you with years of dependability and enjoyment. Experience the

freedom in choosing and customizing how you want to begin each morning. Wake-up

refreshed with the ease and versatility of The Sharper Image

Alarm Clock Dock.

IMPORTANT SAFETY INSTRUCTIONS:

When using an electrical appliance, basic precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USING

DANGER

- To reduce the risk of electric shock:

•Alwaysunplugtheappliancefromtheelectricaloutletimmediatelyafterusing

and before cleaning.

•Donotreachforanappliancethathasfallenintowater.Unplugitimmediately.

•Donotplaceorstoreappliancewhereitcanfallorbepulledintoatuborsink.

•Donotplaceinordropintowaterorotherliquid.

WARNING

- To reduce the risk of burns, fire, electric shock or injury to persons:

• Closesupervisionisnecessarywhenthisapplianceisusedbyornearchildren,invalidsor

disabled persons.

• Usethisapplianceonlyforitsintendeduseasdescribedinthismanual.Donotuse

attachments not recommended by THE SHARPER IMAGE

; specifically any attachments not

provided with the unit.

• Neveroperatethisapplianceifithasadamagedcord,plug,cableorhousing.Ifitisnot

working properly, if it has been dropped or damaged, return it to THE SHARPER IMAGE

Service Center for examination and repair.

• Keepcordawayfromheatedsurfaces.

• Neverdroporinsertanyobjectintoanyopening.

• Donotoperatewhereaerosol(spray)productsarebeingusedorwhereoxygenisbeing

administered.

• Donotcarrythisappliancebypowercordorusecordashandle.

• Todisconnect,removeplugfromoutlet.

• Thisapplianceisdesignedforindooruseonly.Donotuseoutdoors.

• Onlysetondrysurfaces.Donotplaceonsurfacewetfromwateror

cleaning solvents.

Caution – Please read all instructions carefully before operating.

•Neverleavetheapplianceunattended,especiallyifchildrenare

present.

•Nevercovertheappliancewhenitisinoperation.

•Thisunitshouldnotbeusedbychildrenwithoutadultsupervision.

•Alwayskeepthecordawayfromhightemperatureandfire.

•Donotlift,carry,hang,orpulltheproductbythepowercord.

•Iftheadaptorsustainsdamage,youmuststopusingthisproduct

immediately and contact The Sharper Image

ServiceCenter.(Seethe

warrantysectionforTheSharperImageaddress.)

SAVE THESE INSTRUCTIONS

Caution: All

servicing of

this product

must be

performed by

authorized

SI Products

Service

Personnel

only.

4 5

Alarm Clock Dock Main Features:

• Simpledockingtocharge,play,anddisplayyouriPod/iPhone

• AlarmClockRadiowithFMdigitaltuner

• Easy-to-readlargedisplaywithilluminatedLCD

• Snooze/Napbarforfurtherrelaxation

• Clear,QualitySound(6Wattx2Output)

• DigitalVolume(0~10level)

• Full-RangeDual(2)SpeakersIncluded(2”diameter)

• RemoteControlforyourconvenience

• 3VDC(1xCR2025)-forRemoteControl(included)

• 3‘AA’batteriesforemergencybackupfunctionofclock(notincluded)

• 12V/1.5A(120Vinput)AC/DCAdaptor(included)

Remote Control battery installation:

Simplypulltabouttoactivatebatterypower.OneRemoteControlincluded.3V

DC(1xCR2025)included.

Installing or Replacing Backup Batteries:

Thissystemuses3xAAbackupbatteries(notincluded)toprovidebackupalarm

operation and clock settings in the event of a power failure. After backup battery

installation, if a power failure does occur or if the AC cord does accidentally

disconnect, the display backlight will not remain lit, but current time and alarm time

settings will be temporarily maintained.

Otherwise, you must reset the time and alarm settings.

1. Open backup battery compartment door located on the bottom of the unit.

2.PleasemakesuretheACadaptorisconnected.Otherwiseallsettingsmaybe

lost during battery replacement.

3.Insert3(three)AAbatteries,checkingthatthepolarity(“+”and“–“endsof

thebattery)matchesthedrawingnearthebatterycompartment.Closethe

compartment door.

Note:Makesureyoudisposeofbatteriesproperly(seeyourlocalregulations).

Fig. 1

1. timer

2. time set

3. audio

4. power

5. al1 al2

6. al mode

7. al set

8. dock

9. set +

10. set –

11. snooze/nap

12. vol +

13. vol –

14. AUX IN

Connector

Cable Jack

15. AC/DC Adaptor

(iPhone not included)

1 2

3 4 5

6 7

Alarm Clock Dock Buttons and Parts:

Fig. 2

6 7

Getting Started

ListeningtoMusicfromyouriPod/iPhone:

1. Press the POWER button, located on top of alarm clock, to turn unit ON.

2.FitiPod/iPhonecarefullyintodock,dockingconnectorshouldeasilymatchwith

socket on your iPod/iPhone.

Please Note: Do not force. Carefully slide iPod/iPhone over dock connector to

avoid damage.

WARNING: INSERTANDPINCONNECTORAREDESIGNEDFORAPPLEiPOD/

iPHONEMUSICPLAYERSONLY.ATTEMPTINGTOATTACHORFORCEANY

NON-iPOD/iPHONEMUSICPLAYERINTODOCKWILLDAMAGE AND EVEN

DESTROY YOUR DEVICE.

3.PresstheAUDIObuttontoplaytheiPod/iPhone.TheiPod/iPhoneICONwill

appearontheLCDdisplayoftheclocktoindicatethattheiPod/iPhonemode

has been selected.

Note: When the iPod/iPhone is docked and in standby mode, it will

automatically begin playing once the iPod/iPhone mode is selected on the unit.

4.PresstheVOL+orVOL-toadjustthevolume.

5. To turn the unit OFF, press the POWER button. Note: For your convenience,

the iPod/iPhone will continue charging on the dock while the unit is plugged in,

even if the power is turned off.

Refer to Fig. 1.

Volume Control:

• Press“+”toincreasethevolumelevel.

• Press“-“todecreasethevolumelevel.

Listening to a non-docking iPod or other portable

audio devices:

IfyouhaveaniPodwithoutadockingportoradifferentMP3player,including

otherportableaudiodevices,simplyplugitintoAUXIN(locatedbehindunit)to

play.

1.PlugoneendoftheConnectionCable(included)intotheheadphoneorAUX

IN jack on your audio device. Plug the other end of the Connection Cable into

the unit AUX IN, located on the back of the unit.

2.PressthePOWERbutton,locatedontopofalarmclock,toturnunitON.

3.TogglethroughtheAUDIObuttonontopoftheunituntilyoureachtheAUX

mode.

The AUX ICON will appear in the right side of the clock to indicate that the AUX

mode has been selected.

4.PresstheVOL+orVOL-toadjustthevolume.

NOTE: You may need to adjust the volume on the external device as well.

5. Press the POWER button to turn unit OFF.

NOTE: You may need to turn off your external audio device as well.

RefertoFig.2.

Listening to the Radio:

FM Antenna

Extend FM wire antenna fully for best FM reception.

(DONOTstrip,alterorattachtootherantennas)

1. Press the POWER button, located on top of alarm clock, to turn unit ON.

2.TogglethroughtheAUDIObuttontoplaytheradio,theFMICONwillappearin

the display to indicate that FM has been selected.

3.PressSET+orSET–ontheunitfordesiredstation.

4.PressVOL+orVOL–ontheunittoadjustthevolume.

5. Press the POWER button to turn unit OFF.

8 9

Setting Clock Time:

1. Press TIME SET button located on the top panel of unit, HOUR will be ﬂashing.

PresstheSET+/SET-buttontoselecthour.

2.PressTIMESETbuttonagain,MINUTEwillbeashing.PresstheSET+/SET-

button to select minute.

3.Ifthetimeshowingisnotcorrect,pleasepresstheTIMESETbuttonagainto

repeatsteps1and2.

Setting and Using the Alarms:

Setting Alarm1 or Alarm2 (Individually)

1.PresstheAL1/AL2buttonontheunit,theal1oral2iconwillappearonthe

display to indicate which alarm is activated.

2.PresstheALSETbutton,HOURdigitwillbeginashing.PresstheSET+/SET

- button until the desired hour is displayed.

3.PresstheALSETbuttonagain,MINUTEdigitswillbeginashing.Pressthe

SET+/SET-buttonuntilthedesiredminuteisdisplayed.

4.PresstheALSETbuttonagaintoexitthealarmsettingmodeorthedisplaywill

stop ﬂashing after 5 seconds to indicate the alarm is set.

5.TogglethroughtheALMODEbuttonuntilthecorrespondingLEDlight

illuminates next to the wake mode of your choice: iPod/iPhone, Radio, or Beep

tone.

6.Whenthealarmissounding,pressthePOWERbuttonontheunittoturnthe

alarm OFF. The alarm will automatically sound the next day at the same time.

7.ToSTOPthealarmfromsoundingthenextday,presstheAL1/AL2button

totheOFFposition.Theal1oral2iconwilldisappearontheLCDdisplayto

indicate the alarm is disarmed.

Setting Alarm1 and Alarm2 (Together)

1.PresstheAL1/AL2buttonontheunit,theal1andal2iconwillappearonthe

display to indicate BOTH alarms are activated.

Note: You cannot change the alarm time when BOTH are selected.

If you need to change the alarm time for either alarm, follow step 1 under

“SettingAlarm1orAlarm2”(Individually).

2.TogglethroughtheALMODEbuttonuntilthecorrespondingLEDlight

illuminates next to the wake mode of your choice: iPod/iPhone, Radio or Beep

tone.Bothal1andal2mustwaketothesamemode.

Note: To wake to iPod/iPhone, your iPod/iPhone must be properly docked in

the unit or it will default to beep tone wake mode.

3.Whenthealarmissounding,pressthePOWERbuttontoturnthealarmOFF.

The alarm will automatically sound the next day at the same time.

4.Tostopthealarmfromsoundingthenextday,presstheal1/al2buttonto

theOFFposition.Theal1andal2iconswilldisappearontheLCDdisplayto

indicate the alarms are disarmed.

RefertoFig.2.

Snooze Operation:

Press the SNOOZE/NAP bar after the alarm sounds. The alarm will be silenced

and return 9 minutes later. Snooze can be pressed several times during the 1

hour alarm cycle. You may use this feature until you turn the alarm OFF.

Nap Operation:

TheNapfunctionwillwakeyouafteranapof15,30,45or60minutes–without

theneedtochangeyourregularal1oral2settings.

1. If the system is playing audio, press the POWER button to OFF.

2.TogglethroughtheSNOOZE/NAPbartothecorrespondingtimeofyour

choice:15,30,45or60minutes–itwillshowontheLCDdisplay.

3.TogglethroughtheALMODEbuttonuntilthecorrespondingwakemodeicon

ofyourchoicelightsupontheLCDdisplay:iPod/iPhone,RadioorBeeptone.

4. The alarm will sound to wake you up after the selected number of minutes

have passed.

5. To cancel the Nap timer, press the SNOOZE/NAP bar until OFF shows on the

LCDdisplay,whichindicatestheNapfunctionisdisarmed.

Dimmer Control:

PresstheDIMMERbutton(locatedbehindunit)toadjustthebacklightintensityof

theLCDdisplay.

10 11

Using the Remote Control:

Maintenance

To Store

You may leave the unit on display, or you can store it in its box in a cool, dry

place.

To Clean

Use only a soft dry cloth to clean the enclosure of the unit.

NEVERuseliquidsorabrasivecleanertoclean.

Modifications not authorized by the manufacturer may void user warranty.

Note:Thisequipmenthasbeentestedandfoundtocomplywiththelimits

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interferenceinaresidentialinstallation.Thisequipmentgenerates,uses

andcanradiateradiofrequencyenergyand,ifnotinstalledandusedin

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occurinaparticularinstallation.Ifthisequipmentdoescauseharmful

interference to radio or television reception, which can be determined by

turningtheequipmentoffandon,theuserisencouragedtotrytocorrect

the interference by one or more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandreceiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhich

the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

audio timer

snooze/nap

Power on / off

Timer: press to select timer.

: press to start play back, press

again to pause.

: go to next song.

Audio: press to choose audio

sources.

Snooze/Nap: press snooze

mode when alarm is

sounding, and nap function

when unit is off.

: go to previous song.

: select the function

menu, use up/down button.

THE SHARPER IMAGE ® name and logo are registered trademarks.

IB-ECB145

ONE YEAR LIMITED WARRANTY

SI PRODUCTS sells its products with the intent that they are free of defects in manufacture and

workmanship for a period of one year from the date of original purchase, except as noted below.

SI PRODUCTS warrants that its products will be free of defects in material and workmanship under

normal use and service. This warranty extends only to consumers and does not extend to Retailers.

To obtain warranty service on your SI PRODUCTS product, mail the product and your dated sales receipt

(as proof of purchase), postpaid, to the following address:

SI PRODUCTS Consumer Relations

Service Center Dept. 168

3000 Pontiac Trail

Commerce Township, MI 48390

No COD's will be accepted.

SI PRODUCTS does not authorize anyone, including, but not limited to, Retailers, the subsequent

consumer purchaser of the product from a Retailer or remote purchasers, to obligate SI PRODUCTS in any

way beyond the terms set forth herein. This warranty does not cover damage caused by misuse or abuse;

accident; the attachment of any unauthorized accessory; alteration to the product; improper installation;

unauthorized repairs or modifications; improper use of electrical/power supply; loss of power; dropped

product; malfunction or damage of an operating part from failure to provide manufacturer’s recommended

maintenance; transportation damage; theft; neglect; vandalism; or environmental conditions; loss of use

during the period the product is at a repair facility or otherwise awaiting parts or repair; or any other

conditions whatsoever that are beyond the control of SI PRODUCTS.

This warranty is effective only if the product is purchased and operated in the country in which the

product is purchased. A product that requires modifications or adoption to enable it to operate in any

other country than the country for which it was designed, manufactured, approved and/or authorized, or

repair of products damaged by these modifications is not covered under this warranty.

THE WARRANTY PROVIDED HEREIN SHALL BE THE SOLE AND EXCLUSIVE WARRANTY. THERE

SHALL BE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS OR ANY OTHER OBLIGATION ON THE PART OF THE COMPANY WITH

RESPECT TO PRODUCTS COVERED BY THIS WARRANTY. SI PRODUCTS SHALL HAVE NO LIABILITY FOR

ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES. IN NO EVENT SHALL THIS WARRANTY

REQUIRE MORE THAN THE REPAIR OR REPLACEMENT OF ANY PART OR PARTS WHICH ARE FOUND TO BE

DEFECTIVE WITHIN THE EFFECTIVE PERIOD OF THE WARRANTY.

NO REFUNDS WILL BE GIVEN. IF REPLACEMENT PARTS FOR DEFECTIVE MATERIALS ARE NOT AVAILABLE,

SI PRODUCTS RESERVES THE RIGHT TO MAKE PRODUCT SUBSTITUTIONS IN LIEU

OF REPAIR OR REPLACEMENT.

This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed

products, including but not limited to sale of such products on Internet auction sites and/or sales of such

products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and

terminate as to any products or parts thereof which are repaired, replaced, altered, or modified, without

the prior express and written consent of SI PRODUCTS.

This warranty provides you with specific legal rights. You may have additional rights which may vary from

state to state. Because of individual regulations, some of the above limitations and exclusions may not

apply to you. For more information regarding our product line in the USA,

please visit: www.siproducts.com

SI Products

Service Center

1.888.856.6781

8:30a.m. – 7:00p.m. (EST)

M – F

Mail To: SI Products

Consumer Relations

Service Center Dept. 168

3000 Pontiac Trail

Commerce Township, MI

48390

e-mail:

cservice@siproducts.com

Manual de instrucciones

e información de garantía

EC-B145

Parlante Inalámbrico para

Interiores/Exteriores

Page is loading ...

Sharper Image EC-B145 User manual

Brand: Sharper Image

Model: EC-B145

Category: Mobile device dock stations

Type: User manual

Download PDF

report

in other languages

español: Sharper Image EC-B145 Manual de usuario

Sharper Image EC-B145 User manual

Sharper Image EC-B145 User manual

in other languages

Related papers

Other documents