Defort DBG-151N Owner's manual

Bedienungsanleitung ..........................4

User’s Manual ....................................5

Mode d’emploi ....................................6

Instrucciones de servicio ....................7

Manual de instruções .........................8

Istruzione per l’uso .............................9

Gebruiksaanwijzing ..........................10

Brugervejledning ..............................11

Bruksanvisning .................................12

Bruksanvisning .................................13

Käyttöohje ........................................14

Kasutusjuhend .................................15

Instrukcija .........................................16

Instrukcija .........................................17

Инструкция по эксплуатации .........18

Қолданысы бойынша нұсқама .......19

Інструкція з експлуатації ................20

Instruksja obsługi .............................21

Návod k použití ................................22

Uputstvo za korisnike .......................23

Használati utasítás ..........................24

Manual de utilizare ...........................25

Navodilo za uporabo ........................26

BOS

Upute za uporabu ...................27

Οδηγιεσ χρησεωσ ............................28

Kullanım kılavuzu .............................29

...........30

DBG-151N

93728717

Page is loading ...

5

GB

Bench grinder

TECHNICAL SPECIFICATIONS 1

PRODUCT ELEMENTS 2

1. On/off switch

2. Tool rest (Right)

3. Eye shield

4. Eye shield bracket

5. Screw

6. Tool rest (Left)

SAFETY

WARNING! Read all instructions. Failure to follow all in-

structions listed below may result in electric shock, ﬁ re

and/or serious injury.

• Check the following:

• Does the voltage rating of the bench grinder cor-

respond to the power supply?

• Is an earthed mains power socket available?

• Are the power cord and plug in good condition (sol-

id, without fraying or other damage)?

• Avoid the use of long extension cords. The extension

cords you use must always be earthed.

• A grinding wheel is a brittle toolpiece. The stone is

not resistant to knocks. Always grind on the front

edge of the grinding wheel, and never on the side

of the grinding wheel. Never ﬁ t a cracked grinding

wheel. Replace it immediately, as the high rotational

speed could cause the stone to ﬂ y apart, causing a

serious accident.

• Always wear safety glasses when grinding.

• Never grind without the cover ﬁ tted over the grinding

wheel.

• Always ﬁ t the grinding wheel cover and tool rest

tightly, and with the correct clearance.

• Never allow more than 1-1.5 mm clearance between

tool rest and grinding wheel.

• Only use the grinding wheel for the work it was de-

signed for (for example sharpening tools), and NOT

for heavy construction work. The following informa-

tion must be available, before you ﬁ t any new grind-

ing wheel:

• Details about the manufacturer.

• Binding material.

• Dimensions.

• Permissible rotational speed.

• Never ream out the hole in a grinding wheel to a

larger diameter.

• The maximum rotational speed of the grinding wheel

should never be allowed to exceed the maximum

speed given for the wheel.

• Never use any grinding wheel that is damaged or

deformed.

• In order to be able to grind safely, the machine must

be ﬁ rmly bolted to a workbench.

• Check that the switch is NOT in the ‘ON/I’ position

before connecting the machine to the power supply.

• Always keep the power cord out of the way of the

tool’s moving parts.

• The grinder must be ﬁ rmly bolted to a workbench.

The length of the ﬁ xing bolts will depend on the thick-

ness of the workbench. If the workbench is made of

steel, it is advisable to use a wooden block or plank

between the grinder and the bench, to insulate it and

prevent vibration.

Immediately switch off the machine whenever:

• The plug or power cord is defective or damaged.

•The switch is defective.

• You smell smoke or burning insulation.

When replacing power cords or plugs

Immediately dispose of old plugs as soon as they are

replaced with new ones. It is dangerous to plug a loose

power cord into the mains power supply.

When using extension cords

• The grinder is ﬁ tted with a triple-core power cord

and an earthed mains plug. Therefore always use

a mains power socket that is also earthed. Should

you need an extension cord, always use a triple-core

extension with earthed plug and socket.

• The cores should have a cross-section of at least 1.5

mm

2

.

MAINTENANCE

Make sure that the machine is not live when

carrying out maintenance work on the motor.

Regularly clean the machine housing with a soft cloth,

preferably after each use. Keep the ventilation slots free

from dust and dirt.If the dirt does not come off use a soft

cloth moistened with soapy water. Never use solvents

such as petrol, alcohol, ammonia water, etc. These sol-

vents may damage the plastic parts.

The machine requires no additional lubrication.

Should a fault occur, e.g. after wear of a part, please

contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during

transport, it is delivered in a sturdy packaging. Most of

the packaging materials can be recycled. Take these

materials to the appropriate recycling locations. Take

your unwanted machines to your local SBM Group

dealer. Here they will be disposed of in an environmen-

tally safe way.

English

Page is loading ...

31

GB DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product

is in conformity with the following standards or stand-

ardized documents: EN 61029-1:2009; EN 61029-2-4/

A1:2003, in accordance with the regulations 2006/42/

CEE, 2006/95/CEE, 2004/108/CEE.

NOISE/VIBRATION Measured in accordance with EN60745

the sound pressure level of this tool is 80.5 dB(A) and

the sound power level is 93.5 dB(A) (standard deviation:

3 dB).

DE KONFORMITÄTSERKLÄRUNG

Wir erklären in alleiniger Verantwortung, daß dieses

Produkt mit den folgenden Normen oder normativen Do-

kumenten übereinstimmt: EN 61029-1:2009; EN 61029-

2-4/A1:2003, gemäß den Bestimmungen der Richtlinien

2006/42/EG, 2006/95/EG, 2004/108/EG.

GERÄUSCH/VIBRATION Gemessen gemäß EN60745

beträgt der Schalldruckpegel dieses Gerätes 80.5 dB(A)

und der Schalleistungspegel 93.5 dB(A) (Standard- ab-

weichung: 3 dB).

FR DÉCLARATION DE CONFORMITÉ

Nous déclarons sous notre propre responsabilité que ce

produit est en conformité avec les normes ou documents

normalisés suivants: EN 61029-1:2009; EN 61029-2-4/

A1:2003, conforme aux réglementations 2006/42/CEE,

2006/95/CEE, 2004/108/CEE.

BRUIT/VIBRATION Mesuré selon EN60745 le niveau de

la pression sonore de cet outil est 80.5 dB(A) et le niveau

de la puissance sonore 93.5 dB(A) (déviation standard:

3 dB).

ES DECLARACIÓN DE CONFORMIDAD

Declaramos bajo nuestra sola responsabilidad que este

producto está en conformidad con las normas o docu-

mentos normalizados siguientes: EN 61029-1:2009; EN

61029-2-4/A1:2003, de acuerdo con las regulaciones

2006/42/CEE, 2006/95/CEE, 2004/108/CEE.

RUIDOS/VIBRACIONES Medido según EN60745 el ni-

vel de la presión acústica de esta herramienta se eleva a

80.5 dB(A) y el nivel de la potencia acústica 93.5 dB(A)

(desviación estándar: 3 dB).

PT DECLARAÇÃO DE CONFIRMIDADE

Declaramos sob nossa exclusiva responsabilidade

que este producto cumpre as seguintes normas ou

documentos normativos: EN 61029-1:2009; EN 61029-

2-4/A1:2003, conforme as disposições das directivas

2006/42/CEE, 2006/95/CEE, 2004/108/CEE.

RUlDO/VIBR AÇÕES Medido segundo EN60745 o nível

de pressão acústica desta ferramenta é 80.5 dB(A) e o

nível de potência acústica 93.5 dB(A) (espaço de erro:

3 dB).

IT DICHIARAZIONE DI CONFORMITÀ

Dichiaramo, assumendo la piena responsabilità di tale

dichiarazione, che il prodotto è conforme alle seguenti

normative e ai relativi documenti: EN 61029-1:2009; EN

61029-2-4/A1:2003,in base alle prescrizioni delle diretti-

ve CEE 2006/42, CEE 2006/95, CEE 2004/108.

RUMOROSITÀ/VIBRAZIONE Misurato in conformità al

EN60745 il livello di pressione acustica di questo utensile

è 80.5 dB(A) ed il livello di potenza acustica è 93.5 dB(A)

(deviazione standard: 3 dB).

NL CONFORMITEITSVERKLARING

Wij verklaren, dat dit product voldoet aan de volgende

normen of normatieve documenten: EN 61029-1:2009;

EN 61029-2-4/A1:2003, overeenkomstig de bepalin-

gen van de richtlijnen 2006/42/EEG, 2006/95/EEG,

2004/108/EEG.

GELUID/VIBRATIE Gemeten volgens EN60745 bedraagt

het geluidsdrukniveau van deze machine 80.5 dB(A) en

het geluidsvermogen-niveau 93.5 dB(A) (standaard devi-

atie: 3 dB).

SE KONFORMITETSFÖRKLARING

Vi intygar och ansvarar för, att denna produkt överens-

stämmer med följande norm och dokument: EN 61029-

1:2009; EN 61029-2-4/A1:2003, enl. bestämmelser och

riktlinjerna 2006/42/EWG, 2006/95/EWG, 2004/108/

EWG.

LJUD/VIBRATION Ljudtrycksnivån som uppmätts enligt

EN60745 är på denna maskin 80.5 dB(A) och ljudeffekt-

nivån är 93.5 dB(A) (standard deviation: 3 dB).

Product managament

V. Nosik

SBM group GmbH

Kurfürstendamm 21

10719 Berlin, Germany

Page is loading ...

34

HINWEISE ZUM UMWELTSCHUTZ

DE

Alt-Elektrogeräte sind Wertstoffe, sie gehören daher nicht in den

Hausmüll!

Wir möchten Sie daher bitten, uns mit Ihrem aktiven Beitrag bei

der Ressourcenschonung und beim Umweltschutz zu unterstüt-

zen und dieses Gerät bei den-falls vorhandeneingerichteten

Rücknahmestellen abzugeben.

ENVIRONMENTAL PROTECTION

GB

Discarded electric appliances are recyclable and should not be

discarded in the domestic waste! Please actively support us in

conserving resources and protecting the environment by

returning this appliance to the collection centres (if available).

INFORMATIONS SUR LA

PROTECTION DE L’ENVIRONNEMENT

FR

Tout appareil électrique usé est une matière recyclable et ne fait

pas pas partie des ordures ménagères! Nous vous demandons

de bien vouloir nous soutenir en contribuant activement au mé-

nagement des ressources et à la protection de l’environnement

en déposant cet appareil dans sites de collecte(si existants).

RICHTLIJNEN VOOR

MILIEUBESCHERMING

NL

Gebruikte elektronische apparaten horen niet thuis in het hui-

safval!

Wij vragen u daarom een bijdrage aan de bescherming van ons

milieu te leveren en dit apparaat op de voorziene verzamelpla-

atsen af te geven.

ANVISNINGER OM

MILJØBESKYTTELSE

DK

Kasserede elektriske apparater indeholder materiale, der kan

genbruges, og bør derfor aldrig smides væk som almindeligt af-

fald. Når dette apparat skal kasseres, vil vi derfor opfordre Dem

til at aﬂevere det på et egnet opsamlingssted, hvis et sådant ﬁn-

des, og således være med til at bevare ressourcer og beskytte

miljøet.

AVVERTENZE PER LA TUTELA

DELL’AMBIENTE

IT

Gli apparecchi elettrici vecchi sono materiali pregiati, non rientra-

no nei normali riﬁuti domestici! Preghiamo quindi i gentili clienti

di contribuire alla salvaguardia dell’ambiente e delle risorse e di

consegnare il presente apparecchio ai centri di raccolta compe-

tenti, qualora siano presenti sul territorio

ADVERTENCIA PARA LA

PROTECCIÓN DEL MEDIO AMBIENTE

ES

¡Los aparatos eléctricos desechables son materiales que no son

parte de la basura doméstica! Por ello pedimos para que nos

ayude a contribuir activamente en el ahorro de recursos y en la

protección del medio ambiente entregando este aparato en los

puntos de recogida existentes.

INDICAÇÕES PARA A PROTECÇÃO

DO MEIO AMBIENTE

PT

Aparelhos eléctricos antigos são materiais que não pertencem

ao lixo doméstico! Por isso pedimos para que nos apoie, con-

tribuindo activamente na poupança de recursos e na protecção

do ambiente ao entregar este aparelho nos pontos de recolha,

caso existam.

ÅTERVINNING

SE

Elektriska verktyg, tillbehör och förpackning får inte kastas i hus-

hållssoporna (gäller endast EU-länder). Enligt direktivet 2002/96/

EG som avser äldre elektrisk och elektronisk utrustning och dess

tillämpning enligt nationell lagstiftning ska uttjänta elektriska

verktyg sorteras separat och lämnas till miljövänlig återvinning

YMPÄRISTÖNSUOJELU

FI

Älä hävitä sähkötyökalua, tarvikkeita tai pakkausta tavalli-

sen kotitalousjätteen mukana (koskee vain EU-maita). Van-

hoja sähkö- ja elektroniikkalaitteita koskevan EU-direktiivin

2002/96/ETY ja sen maakohtaisten sovellusten mukaisesti käy-

tetyt sähkötyökalut on toimitettava ongelmajätteen keräyspistee-

seen ja ohjattava ympäristöystävälliseen kierrätykseen

MILJØVERN

NO

Kast aldri elektroverktøy, tilbehør og emballasje i husholdnings-

avfallet (kun for EU-land). I henhold til EU-direktiv 2002/96/EF

om kasserte elektriske og elektroniske produkter og direktivets

iverksetting i nasjonal rett, må elektroverktøy som ikke lenger

skal brukes, samles separat og returneres til et miljøvennlig gjen-

vinningsanlegg

KESKONNAKAITSE

EE

Ärge visake kasutuskõlbmatuks muutunud elektrilisi tööriistu, lisatarvi-

kuid ja pakendeid ära koos olmejäätmetega (üksnes EL liikmesriikide-

le). Vastavalt Euroopa Parlamendi ja nõukogu direktiivile 2002/96/EÜ

elektri- ja elektroonikaseadmete jäätmete kohta ning direktiivi nõuete

kohaldamisele liikmesriikides tuleb kasutuskõlbmatuks muutunud elekt-

rilised tööriistad koguda eraldi ja keskkonnasäästlikult korduvkasutada

või ringlusse võtta

APLINKOS APSAUGA

LT

Nemeskite elektrinių įrankių, papildomos įrangos ir pakuotės į buitinių

atliekų konteinerius (galioja tik ES valstybėms). Pagal ES Direktyvа

2002/96/EG dėl naudotų elektrinių ir elektroninių prietaisų atliekų utili-

zavimo ir pagal vietinius valstybės įstatymus atitarnavę elektriniai įran-

kiai turi būti surenkami atskirai ir gabenami į antrinių žaliavų tvarkymo

vietas, kur jie turi būti sunaikinami ar perdirbami aplinkai nekenksmingu

būdu

APKĀRTĒJĀS VIDES AIZSARDZĪBA

LV

Neizmetiet elektroiekārtas, piederumus un iesaiņojuma materiālus

sadzīves atkritumos (tikai ES valstīm). Saskaņā ar Eiropas Direktīvu

2002/96/EG par lietotajām elektroiekārtām, elektronikas iekārtām un tās

iekļaušanu valsts likumdošanā lietotās elektroiekārtas ir jāsavāc atse-

višķi un jānogādā otrreizпjai pārstrādei videi draudzīgā veidā

Page is loading ...

Defort DBG-151N Owner's manual

Defort DBG-151N Owner's manual

in other languages

Related papers

Other documents