Zeck Audio F Serie D E Owner's manual

B e d i e n u n g s a n l e i t u n g

Owner's Manual

F-series

compact

M o n i t o r s

Page is loading ...

5

owner`s manual F 52 series © Zeck Audio

owner's manual F-series compact

Rot

Schwarz

Rot

Schwarz

Reihenschaltung

Gesamtimpedanz = 8 Ohm

Parallelschaltung

Gesamtimpedanz = 2 Ohm

– Anschluß

+ Anschluß

Rot

Schwarz

Rot

Schwarz

– Anschluß

+ Anschluß

Page is loading ...

Zeck F 42 S / T / TW

F 52 S / T / TW

Owner's manual

Dear customer,

thank you very much for purchasing our F series compact speaker cabinets.

This line of ultra-compact speaker cabinets includes six models, with an ap-

pealing black polystyrene enclosure (white enclosure for F 42 TW and F 52 TW).

Having the same features as the F 52 versions, the F 42 models come in a

smaller cabinet if even more compactness is desired.

The ‘S’ models have a standard 4 ohms speaker configuration and can be

used with any conventional amplifier, while the ‘T’ and ‘TW’ versions have a

built-in transformer for use in 100V-line (constant voltage) sound systems. All

F series cabinets are equipped with high-quality speakers, providing a very

natural sound with excellent peak response in any environment.

The F series compact speaker cabinets are suitable for a great variety of appli-

cations including installed sound systems and stage or studio monitoring. A

wide choice of available mounting hardware allows the F series speakers to be

installed in any location for and endless number of applications.

To become quickly familiar with your new F-series compact cabinets, please

study the following instructions carefully.

The people at Zeck

13

owner`s manual F 52 series © Zeck Audio

owner's manual F-series compact

Contents:

1. Connecting the ‘S’ version cabinets

2. Connecting ‘T’ and ‘TW’ version cabinets

3. Mounting hardware

4. Accessories

5. Technical specifications

1. Connecting the ‘S’ version cabinets

The ‘S’ version speaker cabinets are internally wired for 4 ohms standard

operation and will work with any conventional power amplifier. Speaker net-

works can be built by parallel or series wiring of speaker cabinets or as a com-

bination of both wiring modes. For best power efficiency, the total impedance

of the speaker network should be as low as possible without falling below the

minimal recommended speaker impedance for the power amplifier (mostly 2 or

4 ohms).

The following illustrations show how parallel and series wiring of two ‘S’ type

speaker cabinets works:

14

owner`s manual F 52 series © Zeck Audio

F-series compact owner's manual

red

black

single speaker cabinet

total impedance = 4 ohms

– terminal

+ terminal

15

owner`s manual F 52 series © Zeck Audio

owner's manual F-series compact

red

black

red

black

series wiring

total impedance = 8 ohms

– terminal

+ terminal

parallel wiring

total impedance = 2 ohms

red

black

red

black

– terminal

+ terminal

For any kind of wiring, always check for right polarity of the connections as

reverse-polarity wiring may result in phase cancellations and sound degradation.

The terminals on the speaker cabinets are colored RED (+) and BLACK (-) to

assure error-free connection. It is also a good idea to use speaker cable with a

polarity marking.

A speaker network should always have a symmetrical structure to ensure that

every single cabinet receives the same amount of electrical power. The follow-

ing illustration shows some possible examples of symmetrical networks and

their total impedance :

For larger sound systems with long cables or a total number of more than six F

series speakers, the ‘T’ or ‘TW’ versions are more suitable (see below).

16

owner`s manual F 52 series © Zeck Audio

F-series compact owner's manual

+

–

total impedance = 6 ohms, total power 1050 W

total impedance = 4 ohms, total power 700 W

4 speaker cabinets

6 speaker cabinets

2. Connecting ‘T’ and ‘TW’ speaker cabinets

The ‘T’ and ‘TW’ version cabinets have a built-in transformer that allows these

models to be used with a 100V-line (constant voltage) sound system.

Constant voltage sound systems have the advantage of very little cable loss

and should be used wherever long cable lengths have to be installed. Another

great advantage of 100V-line systems is their simple wiring: all speakers are

just connected in parallel and the power of every single speaker cabinet can

be individually adjusted. Series wiring of speaker cabinets within 100V-line

systems is not necessary and should not be performed.

For correct matching of impedances within a 100V-line sound system, a speci-

al power amplifier with a 100V-line output or a standard amplifier with an exter-

nal 100V-line output transformer should be used.

Two switches on the rear panel of the ‘T’ and ‘TW’ models allow to match the

cabinets to different constant voltage systems and to adjust the output power

each individual speaker cabinet :

The right-hand 5-position rotary switch on the back panel allows to select bet-

ween four constant voltage systems, 25 V, 50V, 70V and 100V, depending on

the nominal output voltage of the power amplifier or the output transformer.

The output power of each speaker cabinet is selected via the left 6-position

rotary switch. Changes of the settings should only be done with no sound or at

very low volume settings.

Setting both switches to their ‘0’ position bypasses the built-in line transformer

and automatically re-configures the speakers for standard 4 ohms wiring.

Attention: If ‘T’ version cabinets are used within a constant voltage sound

system, never set the switches to ‘0’, as this might damage the speakers.

17

owner`s manual F 52 series © Zeck Audio

owner's manual F-series compact

SERIAL N.

MADE IN ITALY

0.3W

3W

10W

30W

1W

50V 100 V

70V

Bypass

1

2

Power Capacity 60W

Nominal Impedance 4 ohms

If no amplifier with speaker transformer is available, a standard power amplifier

can be used for larger parallel-wired systems with ‘T’ version cabinets. In this

configuration, set the voltage selector switch to ‘25V’ and the power selector

switch to ‘20W’.

3. Mounting hardware

The unique shape of the F series speaker cabinets with their 45 degrees slan-

ted sides allows for a great variety of positionings, even when no additional

mounting hardware is used :

For mounting F series speaker cabinets into any location for complete sound

system installations, a wide choice of mounting hardware is available.

Safety hint: For protection against accidents, make sure that any surface

used for mounting the F series speakers is resistant and solid enough to sup-

port the weight of the cabinets.

F 42 M1, F 52 M1:

Pivot mounting bracket for fixing cabinet

to wall or ceiling. Available in black or

white.

18

owner`s manual F 52 series © Zeck Audio

F-series compact owner's manual

F 52 M2:

Round ball-joint mounting flange

for alignment of the cabinet.

Fits all F-series speakers.

F 42 M4, F 52 M4:

Mounting frame for ‘buried’

installation in ceilings, walls or

panelling. Available in black or

white.

F 52 M5:

Twin mounting bracket for two

F 52 speakers. The two speak-

ers can be arranged to form a

90 or 180 array.

19

owner`s manual F 52 series © Zeck Audio

owner's manual F-series compact

F 52 M6:

Mounting bracket for four F 52

speakers to build a 360 degre-

es array. Using two F 52 M6

brackets allows to place the

group on a stand.

F 52 M7:

Angular bracket for F 52 M6.

Tilts speakers downward for

45 degrees.

More mounting hardware is

available on special request.

4. Accessories

TSW 28 L

An ultra-compact subwoofer, where the twin-speaker arrangement features

Zeck`s patented push-pull bandpass configuration.

The bandpass characteristics of the TSW 28 allow for a simple parallel linkage,

making it the ideal complement for our F-series compact speaker systems.

The TSW 28 L has a four-set binding post connector panel which allows to

have only one subwoofer driven by both channels of one stereo amplifier

(2 x 8 ohms).

20

F-series compact owner's manual

F 52 EQ

Active controller unit for F-series speakers

This active controller unit has been specially designed to enhance the low-

frequency reproduction of our F-series speakers. Simply connect the F 52 EQ

between preamplifier and power amplifier for a more powerful bass response.

5. Technical specifications

F42 S F 42 T

Design 2-way bass reflex 2-way bass reflex

Woofer 4.5" 4.5"

Tweeter Polypropylene cone Polypropylene cone

with ferro-fluid cooled with ferro-fluid cooled

voice coil, CD horn voice coil, CD horn

Coverage 110 x 110 degrees (horn) 110 x 110 degrees (horn)

SPL 88 dB 88 dB

Nominal input 160 W 1/2,5/5/10/20 W with transformer

power (IEC long-term) 160 W (bypass)

Impedance 4 ohms 4 ohms (bypass)

constant voltage wiring:

30 W 10 W 3 W 1 W 0.3 W

----------------------------------------------------------

100 V 320 960 3.2k 9.6k 32k ohms

70 V 160 480 1.6k 4.8k 16k ohms

50 V 80 240 800 2.4k 8k ohms

25 V 20 60 200 600 2k o h m s

Input voltages 25 / 50 / 70 / 100 V

Frequency range 70 - 20.000 Hz 70 - 20.000 Hz

Crossover 4 kHz, 12 dB / octave 4 kHz, 12 dB / octave

Protection Dynamic protection Dynamic protection

circuit for tweeter circuit for tweeter

Enclosure material Polystyrene Polystyrene

Colour Charcoal grey Charcoal grey

Dimensions 150 x 210 x 130 mm 150 x 210 x 130 mm

( w x h x d )

Weight 2 kg 2,5 kg

21

owner's manual F-series compact

F 52 S F 52 T

Design 2-way bass reflex 2-way bass reflex

Woofer 5" with carbon fiber cone 5" with carbon fiber cone

Tweeter Polypropylen cone Polypropylen cone

with ferro-fluid cooled with ferro-fluid cooled

voice coil, CD horn voice coil, CD horn

Coverage 110 x 110 degrees (horn) 110 x 110 degrees (horn)

SPL 90 dB 90 dB

Nominal input 175 W 60 W (bypass)

power (IEC long term) 0.3/1/3/10/30 W with transformer

Impedance 4 ohms 4ohms (bypass)

constant voltage wiring:

30 W 10 W 3 W 1 W 0.3 W

----------------------------------------------------------

100 V 320 960 3.2k 9.6k 32k ohms

70 V 160 480 1.6k 4.8k 16k ohms

50 V 80 240 800 2.4k 8k ohms

25 V 20 60 200 600 2k o h m s

Input voltages 25 / 50 / 70 / 100 V

Frequency range 65 - 20.000 Hz 65 - 20.000 Hz

Crossover 2.5 kHz, 12/18dB / octave 4 kHz, 6/12 dB / octave

Protector Dynamic protection Dynamic protection

circuit for tweeter circuit for tweeter

Enclosure material Polystyrenel Polystyrene

Colour Charcoal grey Charcoal grey

Dimensions 182 x 262 x 167 mm 182 x 262 x 167 mm

( B x H x T )

Weight 3.9 kg 3 kg

22

F-series compact owner's manual

Zeck Audio F Serie D E Owner's manual

This manual is also suitable for

Zeck Audio F Serie D E Owner's manual

in other languages

Related papers

Other documents