Panasonic TX15LT2F Operating instructions

Panasonic
Brand
Panasonic
Model
TX15LT2F
Category
LCD TVs
Type
Operating instructions
15.2˝ Diagonal LCD TV
Operating Instructions
TX-15LT2FModel No.
F.P. INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
ASPECT
TV/AV
1
2 3
4
5 6
7
C
8 9
0
VCR
TQBC0377
Please read these instruction before operating your set and retain them for future reference.
English
2
Dear Panasonic Customer
Welcome to the Panasonic family of customers. We hope that you will have many
years of enjoyment from your new 15.2
″
Diagonal LCD TV.
To obtain maximum benefit from your set, please read these Instructions before
making any adjustments, and retain them for future reference.
Retain your purchase receipt also, and note down the model number and serial
number of your set in the space provided on the rear cover of these instructions.
Warnings and precautions .................................3
Before Operating This Set..................................4
Supplied Accessories ................................................. 4
Fitting remote control batteries................................... 4
Receiver Location ...................................................... 5
Optional External Equipment ..................................... 5
For optimum quality picture........................................ 5
How to use the LCD stand ......................................... 5
Quick start Guide ................................................6
1. Choose Your Connection Type............................... 6
2. Connecting the AC Adaptor.................................... 7
3. Switch TV ON......................................................... 7
4. Auto set up ............................................................. 7
Basic controls .....................................................8
Side panel controls and Remote control .................... 8
Using the On Screen Displays .........................10
Setup menu .......................................................12
Tuning menu...................................................... 13
Tuning menu overview ............................................. 13
Programme edit........................................................ 14
Auto setup ................................................................ 18
Manual Tuning.......................................................... 19
Fine tuning ............................................................... 20
How to Cancel the Fine Tuning ................................ 20
Volume correction .................................................... 21
Colour System Selection
(Different region use differing systems) ................... 22
Tuning your VCR and satellite reciver ............ 23
Tuning your TV to the VCR ...................................... 23
Picture menu .....................................................24
Sound menu ......................................................26
Aspect Controls ................................................28
Advanced Remote Control Operation ............. 30
VCR / DVD Operation .............................................. 30
TELE TEXT .............................................................. 31
Connections ......................................................34
How to connect the input terminals .......................... 34
How to connect the AUDIO OUT terminals .............. 35
Connecting Headphones / Earphones ..................... 35
Troubleshooting ................................................ 36
Maintenance ......................................................37
Specifications....................................................38
Table of Contents
3
Warnings and Precautions
• This TV set is designed to operate on DC 15V.
• To prevent damage which might result in electric shock
or fire, do not expose this TV set to rain or excessive
moisture. This TV must not be exposed to dripping or
splashing water and objects filled with liquid, such as
vases, must not be placed on top of or above the TV.
• WARNING : HIGH VOLTAGE!!!
Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside.
• TV Games / Home Computers
Extended use of TV games or home computers with
any television set can cause a permanent ‘shadow’ on
the screen. This type of irreversible LCD panel
damage, can be limited by observing the following
points:
• Reduce the brightness and contrast levels to a
minimum viewing level.
• Do not allow a still picture to be displayed for an
extended period, as this can cause a permanent after-
image to remain on the LCD TV screen.
• Examples of still pictures include logos, video games,
computer images, teletext and images displayed in 4:3
mode.
• This type of LCD panel damage, is not an operating
defect, and as such is not covered by the Panasonic
warranty.
• The On/Off switch on this model does not fully
disconnect the TV from the mains supply. Remove the
mains plug from the wall socket when the TV set is not
used for a prolonged period of time.
Note:
• If the set is not switched off when the TV station stops
transmitting, it will automatically go to stand-by mode
after 30 minutes. This function will not operate when
the TV is in AV mode.
• Cabinet and LCD panel care
Remove the mains plug from the wall socket. The
cabinet and LCD panel can be cleaned with a soft cloth
moistened with mild detergent and water. Do not use
solutions containing benzol or petroleum.
• When ambient temperature is cool, the picture may
take a short time to reach normal brightness, but this
is not a malfunction. (After brief moment, the picture
will have normal brightness.)
• Adequate ventilation is essential to prevent failure of
electrical components, we recommend that a gap of
at least 10cm is left all around this television receiver
even when it is placed inside a cabinet or between
shelves.
• Avoid exposing the TV set to direct sunlight and other
sources of heat.
4
F.P. INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
DIRECT
TV REC
ASPECT
1
2 3
4
5 6
7
C
8 9
VCR
0
TV/AV
Before Operating This Set
•
Operating Instruction book
•
Remote Control Transmitter
(EUR511270)
•
AC Adaptor & Mains Lead
AC Adaptor: (N0JZHK000006)
Mains Lead: (K2CR2DA00006)
•
Batteries for the Remote Control
Transmitter
(2 × R6 (UM3) size)
•
Warranty Card
Slide off the battery cover Insert batteries - note
correct polarity (+ and -)
Replace the cover
Two R6 (UM3) size
Fitting remote control batteries
123
Supplied Accessories
Check the accessories before installations.
• Make sure that the batteries are fitted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni - Cad) batteries.
5
Before Operating This Set
Receiver Location
Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on
the screen.
Use of some types of fluorescent lighting can reduce remote control transmitter range.
Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or
moisture.
To insure optimum picture do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.
Optional External Equipment
The Video/Audio connection between components can be made with shielded video and audio cables. For best
performance, we recommend 75 ohm coaxial aerial cable is used. Cables are available from your dealer or electronic
supply store.
Before you purchase any cables, be sure you know what type of output and input connectors your various components
require. Also determine the length of cable you’ll need.
For optimum quality picture
When the LCD is exposed to light from outdoors or lighting fixtures, high-contrast pictures may not be displayed
clearly. Turn off florescent lamps near the LCD and place in a location not exposed to outdoor light.
How to use the LCD stand
Adjust the stand to your desired angle. The stand angle can be adjusted between 0 ° forward to 28 ° back.
28
0
6
Quick start Guide
1.
Connecting the TV directly to an aerial only
Connect the Aerial lead into the TV Aerial socket ( ).
2. Connection of TV and VCR using Scart
and RF
Connect the AERIAL to the Aerial in socket of the
VCR and an RF cable from the VCR Aerial Out
socket to the TV Aerial socket ( ).
Scart Connections
The VCR can also be connected to the TV using
a Scart cable.
Connect AV1 of the VCR to AV1 Scart socket of
this set.
Notes:
• Additional equipment and cables are not supplied.
• Further details of audio / video connections can be
found on pages 34 and 35.
1. Choose Your Connection Type
Aerial Input socket
LCD TV
Aerial socket
Aerial Lead
Aerial
(Not Supplied)
Aerial
Input
Socket
LCD TV
RF OUT
RF IN
VCR
Mains
Socket
Aerial
(Not Supplied)
or
7
Quick start Guide
1 Connect the mains lead to the AC Adaptor.
2
Connect the AC Adaptor DC plug to the DC IN socket.
3 Plug into household mains socket.
• Be sure to use the power cord and AC adaptor
included in the accessories.
• Do not use the AC adaptor for other than the
specified equipment.
• Unplug the AC adaptor if it is not used for long
time.
• Do not place any objects on the AC adaptor.
• Do not use the AC adaptor outdoors.
• Do not attempt to repair the AC adaptor if it is
broken or malfunctioning. Refer the servicing to
the service representative.
• Do not try to open the AC adaptor.
• Do not use water or wet cloth for cleaning the
AC adaptor.
2
1
3
2. Connecting the AC Adaptor
3. Switch TV ON
Press the switch on the LCD TV to turn
the set on.
IMPORTANT NOTES
There are two ways to switch the TV set to
stand-by mode.
(A) Press the switch on the LCD TV and
check RED LED is lit.
OR
(B) Press the Stand-by button on the remote
control.
The TV set can be switched on by the remote
controller if it was switched to stand-by using
method (A) or method (B).
When programme number up ( )/down ( )
buttons on the side panel of the main part are
pressed in stand-by mode, TV turns on.
If the TV has not been programmed for you then
Auto setup will begin, your stations will be
located, sorted into order and stored ready for
use (refer to P18).
4. Auto set up
Land
Start ATP Suchlauf
Abbruch
Power-Indicator
The RED LED when
indicates that not only
the TV set is in stand-
by mode but also the
external AC adaptor is
still on.
SETUP : Return to tuning menu
TV/AV : To exit
02 99:21 41
AUTO SETUP IN PROGRESS
SEARCHING:PLEASE WAIT
8
Basic controls
TV/TEXT Selection (see page 31, 32, 33)
Picture Menu
(see page 24, 25)
Sound Menu
(see page 26, 27)
TEXT Favourite Page Selection
(see page 32)
Ambience (see page 26, 27)
Aspect Control (see page 28, 29)
Status button
Press to display programme position, programme name,
channel number, time, MPS mode, Aspect mode and
programme table.
VCR / LD / DVD Rewind / Review
Normalization (see page 25, 27)
The N button will recall settings
stored with STR.
Setup Menu
(see page 12)
Side panel controls and Remote control
Aspect Control (see page 28, 29)
Sound Mute
TV/AVmode Selection
Press to select TV, AV input signal modes sequentially.
TV ON / Stand-by
Headphone Jack (M3 jack)
Function selection (see on this page below)
Volume Up (+), Down (-)/
Programme Number Up ( ), Down ( )
Volume adjustment which uses these buttons is
performed after pressing Function button.
When programme number up ( )/down ( )
buttons on the side panel of the main part are
pressed in stand-by mode, TV turns on.
Store (see page 13 ~ 23, 32)
Function selection
Displays the on screen display functions, press repeatedly to select
from the available functions.
The following adjustments can be accessed directly.
Volume
Backlight
Contrast
Brightness
Colour
Tuning mode
Balance
Treble
Bass
Tint
Sharpness
Notes:
• Tint : Displayed when receiving NTSC signals.
• Tuning mode : Not displayed during AV mode.
9
Basic controls
Power (Stand-by)
The TV set must first be plugged into the wall outlet
and turned on at the power switch.
Press this button to turn the TV set On from Standby
mode, Press it again to turn the TV set OFF to
Standby mode.
Note:
• It is also possible to turn the TV set on from STANDBY
mode by pressing the “Direct Programme Number
Selection” Buttons (0-9) on the Remote Control.
Sound Mute
Press to mute the sound completely the “Mute” symbol will appear.
Press again to restore the previous sound level, and cancel the mute.
Programme Number Selection
Press to select the next higher or lower Programme number.
Volume Adjustment
Press to increase or decrease the sound volume level.
TV/AV Mode Selection
Press to select TV, AV input signal modes sequentially.
Coloured buttons used for Programme edit (see page 16, 17)
Teletext functions (see page 31, 32, 33)
AV Selection
TEXT Index (see page 32)
TEXT hold (see page 32)
Direct Programme Number
• Direct Programme Number Selection
(CH SELECT = DIRECT)
You can select the number directly by pressing
the “C” button and corresponding programme
number buttons.
Channel Number 8.......
Channel Number 36.....
• Direct Programme Number Selection
(CH SELECT = POSITION)
You can select the number directly by press-
ing “Number 0-9” buttons or by pressing “Two
Digit” and “Number 0-9” buttons.
Programme Number 8 .....
Programme Number 12....
When in standby mode, switches TV on.
VCR/LD/DVD Play
VCR/LD/DVD
Fast Forward/cue
VCR/LD/DVD Stop
VCR/LD/DVD Control
(see page 30)
Store (see page 13 ~ 23, 32)
Stores some settings in TUN-
ING menus and TELETEXT.
N
DVD
REC
-
VCR
STR
PROGRAMME
TV/AV
1 2 3
456
789
0
F.P.
INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
DIRECT
TV REC
ASPECT
Volume
2
3
6
8
8
C
C
1
,
, ,
, ,
C
VCR
10
N
DVD
REC
-
VCR
STR
PROGRAMME
TV/AV
1 2 3
456
789
0
F.P.
INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
DIRECT
TV REC
ASPECT
C
VCR
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control
as shown below to access and adjust features as desired.
Contrast
Brightness
Colour
Sharpness
Comb filter
AI
Backlight
Mode
Colour balance
Picture menu
Dynamic
Normal
On
On
Bass
Treble
Headphone volume
MPX
Mode
Ambience
Volume
Balance
Sound menu
No service
Music
Off
Teletext
Off timer
Text language
Tuning menu
OSD language
Setup menu
TOP
Off
West
Access
Access
Press to display “Picture menu”
screen.
Press to display “Sound menu”
screen.
Press to display “Setup menu”
screen.
11
Press to move the cursor up and down on the menu.
Press to access menus, adjust levels or to select from a range of options.
The STR button is used with a number of features to store settings after adjustments
have been made or options have been set.
An On Screen Help box is displayed whenever a menu is displayed
on the TV. This Help box indicates which keys on the remote control
are used to navigate the menu shown, see above for descriptions
of button functions.
STR
TV/AV
The TV/AV button is used to exit the menu system and return to the normal viewing
screen.
SETUP : Return to tuning menu
TV/AV : To exit
02 99:21 41
AUTO SETUP IN PROGRESS
SEARCHING:PLEASE WAIT
All current tuning
data will be erased
WARNING
TV/AV
Exit
Start Auto Setup
Return
1 :
-
Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
’STR’ Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
02 99:21 41
Manual tuning
TV/AV
’STR’ Button Stare
Exit
Serch
down / up
Programme
down / up
Return
Programme edit Auto setup Manual turning
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Tuning menu
Access
Access
Access
Auto
English
Italiano
ELLHNIKA
Romana
cestina
Polski
Deutsch
Norsk
Dansk
Svenska
Magyar
Slovensky
Russkij
Nemacki
Suomi
Hrvatski
Slovensko
Bulgarian
Nederlands
OSD language
Using the On Screen Displays
1 :
-
Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
’STR’ Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
ON SCREEN HELP
‘Instruction’ box
Note:
• If the On Screen Menu is opened in Zoom mode, the screen will be switched into 16:9 aspect ratio.
The screen will return to Zoom mode after exiting the On Screen Menu.
Please refer to the On Screen Help
OSD language allows you to select the language used for On Screen Displays.
12
Allows you to choose 2 modes. (See page 31)
Switches the TV off within a preset time which you
can choose from OFF and between 15 to 90
minutes in 15 minute intervals.
Allows you to choose 3 modes.
Provides access to many other features including
programme edit and Auto setup. (See page 13)
Not displayed during AV mode.
Refer to P11.
During AV mode, Volume correction is displayed.
Lets you adjust the volume level of individual
station. Use this feature if the volume level varies
significantly between stations. Adjusting one
station’s volume to bring it into line with the other
stations means you can avoid having to adjust the
volume each time you change channels.
Setup menu
Teletext
Off timer
Text language
Tuning menu
OSD language
Volume
correction
TOP List
OFF
607590
3015 45
Teletext
Off timer
Text language
Tuning menu
OSD language
Off
West
TOP
Setup menu
Teletext
Off timer
Text language
OSD language
TOP
Off
West
Access
Tuning menu
Setup menu
Teletext TOP
Off timer
Colour system
Volume correction
Off
Auto
West
Text language
OSD language
Setup menu
1 Press to display the setup menu screen.
2 Press to select the menu to adjust.
Press to adjust the desired setting.
Press
TV/AV
at any time to go back to watching TV.
SET UP
WEST
EAST2
EAST1
Teletext
Off timer
Text language
OSD language
TOP
Off
Tuning menu
Setup menu
West
The setup menu provides access to various advanced features and also to the Tuning menu.
Teletext
Off timer
Text language
Tuning menu
OSD language
West
TOP
Setup menu
Off
13
Tuning menu
1 Press
SET UP
.
2 Move to the Tuning menu option by
using or .
3 Access Tuning menu by using
or .
4 Move to chosen menu option by
using or .
5 Adjust chosen option or access
chosen menu by using or .
Press
TV/AV
at any time to go back to watching TV.
Access in order to customise your programme settings (see page 14).
(eg: adding or deleting a programme position.)
Allows you to automatically retune the TV. Useful if you move house
and wish to retune your TV to the local stations (see page 18).
Allows individual programme positions to be tuned manually (see page
19).
Use to make small adjustments to the tuning of an individual station
(useful for example when weather conditions are affecting reception
quality of a program).
Lets you select the correct transmission standard for the transmission
signal being received.
Controls the gain of the received signal, which can differ between
stations.
Pressing
STR
after having adjusted some feature will store the setting as the default (replacing the factory
setting).
F.P. INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
TV/AV
1
2 3
Teletext
Off timer
Text language
OSD language
TOP
Off
West
Access
Tuning menu
Setup menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Tuning menu
Access
Access
Access
Auto
Manual tuning
Fine tuning
Colour system
Volume correc.
Auto
Programme edit
Auto setup
Access
Tuning menu
Tuning menu overview
14
Tuning menu
Programme edit
Use this setting when changing setting of receiving channels or changing the channel display.
Turn the TV and sellect the broadcast channel. Follow the steps below to display the Programme edit screen.
Selecting the Programme edit on the Tuning menu.
1 :
-
Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
’STR’ Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
1 :
-
Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
’STR’ Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
Access to the Programme edit screen
1 Press to display the Setup menu screen.
2 Press to select the Tuning menu.
Press to access the Tuning menu screen.
3 Press to select the Program edit.
Press to access the Program edit screen.
Programme edit
1 Press to select the Programme position.
Press to select the prog., Chan., Name, Lock, Sys.
Note:
• When the cursor enters the Name field, it will move character-by-character
up to five before moving to the next field.
2 The keys function in accordance with the
position of the cursor: prog., Chan., Name, Lock
or Sys.
SET UP
Manual tuning
Fine tuning
Colour system
Volume correc.
Auto
Programme edit
Auto setup
Access
Tuning menu
Cursor position
Prog.
Chan.
Name
Lock
Sys
Function of keys
Moves the Programme position.
Red, Green, Yellow, and Blue Bars are displayed at the bottom of the screen.
These have the same functions as the Red, Green, Yellow, and Blue keys on the
remote control. (see next page)
Sets the number of channels to be displayed.
The characters that can be input are displayed at the bottom of the screen.
Select the characters required and input.
Turns the channel Lock On and Off.
(When receiving a channel while Lock On is selected, the volume will be muted and
the screen be black and display ”Programme is locked”.)
Select from SC3, SC2, SC1 and F.
15
To delete an unwanted programme position
1
Ensure that the cursor is in the Prog. Column.
2
Choose the programme position.
3
Press the Red button on remote control.
4
Press the Red button again to confirm.
5
If you have finished in the Programme edit menu,
press the TV/AV button to exit.
To add a programme position
1
Choose the programme position where the new
programme is to be inserted.
2
Press the Green button.
3 Press the Green button again to confirm.
4 Press STR to store.
5
If you have finished in the Programme edit menu,
press the TV/AV button to exit.
Deleting, Adding and Moving a programme channel
Make sure the cursor is in the Prog. column.
Red, Green, Yellow, and Blue Bars are displayed at the bottom of the screen. These have
the same functions as the Red, Green, Yellow, and Blue keys on the remote control.
Tuning menu
Green
Red
STR
Red
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
-
-
-
-
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
-
CH44 ZXY
-
-
TV/AV
Green
F.P. INDEX HOLD
PICTURE
SOUND
SET UP
TV/TEXT
TV/AV
1
2 3
Delete Add Move
1 :
-
Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
’STR’ Button Stare
Exit
Select
Option
Change
Programme
Return
Delete Add Move
Red Green Yellow Blue
TV/AV
16
To move a programme to another position
1
Choose the programme position to be moved.
2
Press the Yellow button on remote control.
3
Choose new positon.
4 Press the Yellow button again to confirm.
5
If you have finished in the Programme edit menu,
press the TV/AV button to exit.
To tune a programme position
1
Choose the programme position.
Move to the channel column.
2
Increse or decrease channel number or use the
‘C’ key for Direct Channel Access (see page 9).
3
Press STR to store.
4 If you have finished in the Programme edit menu,
press the TV/AV button to exit.
To rename a programme position
1
Choose the programme position.
Move to the Name column.
2
Choose the new character.
Move to the next character position.
3
Continue until renaming is done.
4
Press STR to store.
5 If you have finished in the Programme edit menu,
press the TV/AV button to exit.
Yellow
Yellow
TV/AV
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
programme
Return
Delete Add Move
-
CH44 ZXY
-
-
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
programme
Return
Delete Add Move
-
-
-
CH44 ZXY
Tuning menu
TV/AV
TV/AV
STR
STR
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
channel
Return
-
CH44 ZXY
-
-
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
character
Return
-
CH44 ZXY
-
-
ABCDEFGHIJKLMNOPQRST
UVXWYZ+
-.
0123456789
17
Tuning menu
To lock a programme position to prevent access
1
Choose the programme position to be moved.
Move to the lock column.
2
Choose between lock On or lock Off.
3
Press STR to store.
4 If you have finished in the Programme edit menu,
press the TV/AV button to exit.
To change the TV-system for a programme position
1
Choose the programme position.
Move to the Sys column.
2
Choose the required sound system:
SC1: PAL B, G, H / SECAM B, G
SC2: PAL I
SC3: PAL D, K / SECAM D, K
F : SECAM L / L’
3
Press STR to store.
4 If you have finished in the Programme edit menu,
press the TV/AV button to exit.
TV/AV
STR
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC1
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Lock
off / on
Return
-
CH44 ZXY
-
-
1 : CH41 XYZ Off SC1
2 : Off SC1
3 : Off SC2
4 : Off SC1
5 : Off SC1
Prog. Chan. Name Lock Sys
Programme edit
TV/AV
'STR' Button Stare
Exit
Select
Option
Change
TV system
Return
-
CH44 ZXY
-
-
TV/AV
STR
Note:
• When a programme position is locked, Direct Channel Access usiing the ‘C’ and numeric keys on the remote
control is not avallable.
18
Tuning menu
Auto setup
Automatically scans all TV channels and stores them in memory.
Auto setup automatically retunes your TV. This feature is useful, if for example, you move house and wish to retune
your TV to receive the local stations.
Display the Tuning menu screen
1 Open the setup menu.
2
Move to Tuning menu.
Access Tuning menu.
Auto setup tuning
1 Move to Auto setup.
Access Auto setup.
2 Press to confirm start.
Select your country.
3 Press to start Auto setup tuning, then the Searching
screen will be displayed.
When Searching is complete the screen will return
to the Turning menu screen.
The best tuning position is automatically memorized.
4 Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
Teletext
Off timer
Text language
OSD language
TOP
Off
West
Access
Tuning menu
Setup menu
Programme edit
Auto setup
Manual tuning
Fine tuning
Colour system
Volume correc.
Auto
Access
Tuning menu
All current tuning
data will be erased
WARNING
TV/AV
Exit
Start Auto Setup
Return
TV/AV
Exit
Start Auto Setup
Select
Country
Return
Country
SETUP : Return to tuning menu
TV/AV : To exit
02 99:21 41
AUTO SETUP IN PROGRESS
SEARCHING:PLEASE WAIT
Once this operation is completed the TV will display programme position 1.
Notes:
• If Country or area is set to E. Eu in step 2, the Programme edit screen will appear when Searching is complete.
• If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored
in your TV’s memory will be wiped out so the new settings can be stored).
• If an auto setup process is aborted midway, all channels that have been set up to that point will be saved to memory.
SET UP
TV/AV
19
(From the On screen Display menu)
It is possible on individual programme position.
1
Press to select the Manual tuning.
Press to access the Manual tuning screen.
2
Press to select the desired Programme Number.
Press to search the higher or lower channel.
3 When the desired station is found, press to store.
The programme position will flash.
4 Press to exit from the Tuning Menu.
This returns the set to the normal viewing condition.
Tuning menu
Manual Tuning
Manual tuning of the programme position is available either from the On Screen Display menu or from the side panel
controls.
Turn the TV on and select the broadcast channel. Follow the step on the previos page to disply the Tuning menu screen.
Manual tuning
Fine tuning
Colour system
Volume correc.
Auto
Programme edit
Auto setup
Access
Tuning menu
Helpful Hint
(1) If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
“Colour System Selection” operation on page 22.
(2) When using a VCR without video and audio input/output terminals, it is convenient to connect the aerial cable as
indicated in the instruction manual of VCR and to set the designated channel to programme No. “0”. In that case,
perform manual tune after setting the colour system in advance. Further, in multi-system VCR, it is more convenient
to set the designated channel to several programme Numbers.
02 99:21 41
Manual tuning
TV/AV
’STR’ Button Stare
Exit
Serch
down / up
Programme
down / up
Return
TV/AV
Search Start.
(Via side panel)
1 Press (Side panel) until Tuning mode is reached.
2 Press or to access Tuning mode.
3 Press to move between Change programme, search and TV system.
4 Press or to change programme position or start search.
When the desired station is found, press to store.
The programme position will flash.
Repeat above procedure to tune additional programme positions.
Press at any time to exit the Tuning menu.
(LCD TV Set)
3
1
2
4
Manual tuning (Side panel)
-
, + : Search
TV/AV : Move cursor
STR : Store
F : To exit
02 99:21 41
STR
20
Tuning menu
Fine tuning
How to Cancel the Fine Tuning
Under normal reception conditions this function is not required or necessary.
However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the
picture and sound quality.
1 Press to select the Fine tuning.
Press until the clear picture is received.
2 Press to store the Fine tuning.
This stores the Fine tuning to the selected Programme Number.
3 Press to exit from the Fine tuning.
This returns the set to the normal viewing condition.
TV/AV
Cancelling previously adjusted (manually) fine tuning, means re-activating the AFT (Automatic Fine Tuning). Re-
activating the Automatic Fine Tuning means allowing the set to automatically tune to the optimum tuning position, for
that programme Number.
1
Select the Programme Number which you’d like to
return to Automatic Fine Tuning (cancel the manual
fine tuning).
2 Press to display the Setup menu screen.
Proceed to the Tuning menu (refer to page 13).
3 Press to select the Manual tuning.
Press to access to Manual tuning.
Press briefly to tune the best position.
4 Press to store the AFT.
This stores the re-activated AFT.
5 Press to exit from the Manual tuning.
This returns the set to the normal viewing condition.
STR
STR
TV/AV
Manual tuning
Fine tuning
Colour system
Volume correc.
Auto
Programme edit
Auto setup
Tuning menu
Manual tuning
Fine tuning
Colour system
Volume correc.
Auto
Programme edit
Auto setup
Access
Tuning menu
SET UP
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

Panasonic TX15LT2F Operating instructions

Panasonic
Brand
Panasonic
Model
TX15LT2F
Category
LCD TVs
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents