Konica Minolta DiMAGE E223 User manual

Brand: Konica Minolta

Model: DiMAGE E223

Category: Bridge cameras

Type: User manual

This manual is also suitable for

E223

INSTRUCTION MANUALE

9222-2727-11 PM-A303/ME-0303

2 BEFORE YOU BEGIN

Thank you for purchasing this Minolta digital camera. Please take the time to read through this

instruction manual so you can enjoy all the features of your new camera.

Check the packing list before using this product. If any items are missing, immediately contact your

camera dealer.

Minolta DiMAGE E223 digital camera

AA alkaline batteries (set of two)

Hand strap HS-DG223

Video cable VIC-100

USB cable USB-700

DiMAGE Viewer CD-ROM

DiMAGE Instruction Manuals CD-ROM

Quick Reference Guide (printed)

Minolta International Warranty Certificate

Before you begin

Apple, Macintosh, and Mac OS are registered trademarks of Apple Computer Inc. Microsoft and Windows

are registered trademarks of the Microsoft Corporation. The official name of Windows is Microsoft Windows

Operating System. Pentium is a registered trademark of the Intel Corpora

tion. QuickTime is a trademark used

under licen

se. All other trademarks are the property of their respective owners.

Because the performance of alkaline batteries with digital cameras is

low, the use of Ni-MH batteries or a CR-V3 lithium battery is

recommended.

Read and understand all warnings and cautions before using this product.

Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may

damage property or cause personal injury. Do not ignore the following warnings.

• Only use the batteries specified in this instruction manual.

• Do not install the batteries with the polarity (+/–) reversed.

• Do not use batteries which show wear or damage.

• Do not expose batteries to fire, high temperatures, water, or moisture.

• Do not attempt to short or disassemble batteries.

• Do not store batteries near or in metallic products.

• Do not mix batteries of different types, brands, ages, or charge levels.

• Do not charge alkaline or lithium batteries.

•When recharging rechargeable batteries, only use the recommended charger.

• Do not use leaking batteries. If fluid from the batteries enters your eye, immediately rinse the eye

with plenty of fresh water and contact a doctor. If fluid from the batteries makes contact with your

skin or clothing, wash the area thoroughly with water.

•Tape over battery contacts to avoid short-circuiting during disposal; always follow local regulations

for battery disposal.

WARNING

For proper and safe use

•Use only the specified AC adapter within the voltage range indicated on the adapter unit. An

inappropriate adapter or current may cause damage or injury through fire or electric shock.

• Do not disassemble this product. Electric shock may cause injury if a high voltage circuit inside the

product is touched.

•Immediately remove the batteries or unplug the AC adapter and discontinue use if the camera is

dropped or subjected to an impact in which the interior, especially the flash unit, is exposed.The

flash has a high voltage circuit which may cause an electric shock resulting in injury.The continued

use of a damaged product or part may cause injuries or fire

4 FOR PROPER AND SAFE USE

•Keep batteries or small parts that could be swallowed away from infants. Contact a doctor

immediately if an object is swallowed.

•Store this product out of reach of children. Be careful when around children not to harm them with

the product or parts.

• Do not fire the flash directly into the eyes. It may damage eyesight.

• Do not fire the flash at vehicle operators. It may cause a distraction or temporary blindness which

may lead to an accident.

• Do not use the monitor while operating a vehicle or walking. It may result in injury or an accident.

• Do not look directly at the sun or strong light sources through the viewfinder. It may damage your

eyesight or cause blindness.

• Do not use this product in a humid environment, or operate this product with wet hands. If liquid

enters the product, immediately remove the batteries or unplug the AC adapter and discontinue

use.The continued use of a product exposed to liquids may cause damage or injury through fire or

electric shock.

• Do not use the product near inflammable gases or liquids such as gasoline, benzine, or paint

thinner. Do not use inflammable products such as alcohol, benzine, or paint thinner to clean the

product.The use of inflammable cleaners and solvents may cause an explosion or fire.

•When unplugging the AC adapter, do not pull on the power cord. Hold the adapter unit when

removing it from an outlet.

• Do not damage, twist, modify, heat, or place heavy objects on the AC adapter cord. A damaged

cord may cause damage or injury through fire or electric shock.

• If the product emits a strange odor, heat, or smoke, discontinue use. Immediately remove the

batteries taking care not to burn yourself as the batteries become hot with use.The continued use

of a damaged product or part may cause injuries or fire.

•Take the product to a Minolta Service Facility when repairs are required.

• Do not use or store the product in a hot or humid environment such as the glove compartment or

trunk of a car. It may damage the product and batteries which may result in burns or injuries

caused by heat, fire, explosion, or leaking battery fluid.

• If batteries are leaking, discontinue use of the product.

• The lens retracts when the camera is turned off.Touching the lens barrel while it is retracting may

cause injury.

•The camera temperature rises with extended periods of use. Care should be taken to avoid burns.

• Burns may result if the memory card or batteries are removed immediately after extended periods

of use.Turn the camera off and wait for it to cool.

•Do not fire the flash while it is in contact with people or objects.The flash unit discharges a large

amount of energy which may cause burns.

• Do not apply pressure to the LCD monitor. A damaged monitor may cause injury, and the liquid

from the monitor may cause inflammation. If liquid from the monitor makes contact with skin, wash

the area with fresh water. If liquid from the monitor comes in contact with the eyes, immediately

rinse the eyes with plenty of water and contact a doctor.

•When using the AC adapter, insert the plug securely into the electrical outlet.

• Do not use if the AC adapter cord is damaged.

• Do not cover the AC adapter. A fire may result.

• Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit in

emergencies.

• Unplug the AC adapter when cleaning or when the product is not in use.

CAUTION

6 TABLE OF CONTENTS
The basic operation of this camera is covered between pages 10 and 25. This section of the manu-
al covers the camera parts, preparation of the camera for use, and the basic camera operation for
recording, viewing, and deleting images.
Th
e other sections can be read as needed. Many of the features of this camera are controlled with
menus.The menu navigation sections concisely describe how to change menu settings. Descriptions
of the settings immediately follow the navigation sections.
About this manual
Names of parts..................................................................................................... 8
Camera body.............................................................................................. 8
Mode dial.................................................................................................... 9
Getting up and running....................................................................................... 10
Attaching the hand strap .......................................................................... 10
Installing batteries..................................................................................... 11
Battery condition indicator........................................................................ 12
Auto power off........................................................................................... 12
Connecting the AC adapter (sold separately) .......................................... 13
Setting the language................................................................................. 14
Setting the date and time ......................................................................... 14
Image storage........................................................................................... 16
Basic recording and playback............................................................................. 18
Auto-recording mode display.................................................................... 18
Frame counter .......................................................................................... 18
Viewfinder................................................................................................. 19
Handling the camera ................................................................................ 19
Using the zoom lens................................................................................. 20
Basic recording operation......................................................................... 21
Indicator lamp........................................................................................... 22
Focus lock................................................................................................. 22
Special focusing situations ....................................................................... 23
Playback mode display............................................................................. 24
Viewing images......................................................................................... 24
Display button - playback mode................................................................ 25
Deleting images........................................................................................ 25

Auto-recording mode .......................................................................................... 26

Flash modes ............................................................................................. 26

Flash range............................................................................................... 27

Display button - recording mode............................................................... 27

Exposure compensation ........................................................................... 28

What is an Ev? What is a stop? ........................................................... 29

White balance........................................................................................... 30

Automatic white balance....................................................................... 30

Preset white balance ............................................................................ 30

Movie-recording .................................................................................................. 31

Program-recording mode.................................................................................... 32

Self-timer .............................................................................................. 32

Macro.................................................................................................... 33

Night portrait......................................................................................... 33

Portrait .................................................................................................. 33

Landscape ............................................................................................ 33

Playback mode ................................................................................................... 34

Index playback .......................................................................................... 34

Enlarged playback .................................................................................... 35

Playing back movies ................................................................................. 35

Image copy ............................................................................................... 36

Viewing images on a television ................................................................ 37

Setup mode ........................................................................................................ 38

Navigating the setup menu....................................................................... 38

Deleting all images ................................................................................... 40

Format ...................................................................................................... 40

Image quality ............................................................................................ 41

Buzzer....................................................................................................... 42

About DPOF ............................................................................................. 42

Creating a DPOF Print Order ............................................................... 43

Memory type............................................................................................. 45

Video output ............................................................................................. 45

Data-transfer mode ............................................................................................. 46

System requirements................................................................................ 46

Connecting the camera to a computer ..................................................... 47

Connecting to Windows 98 and 98 Second Edition ................................. 49

QuickTime system requirements .............................................................. 51

Memory card folder organization.............................................................. 52

Uninstalling the driver software - Windows............................................... 53

Disconnecting the camera from the computer.......................................... 54

Appendix .......................................................................................................... 56

Troubleshooting ........................................................................................ 56

Care and storage...................................................................................... 58

About Ni-MH batteries .............................................................................. 60

About the DiMAGE Viewer ....................................................................... 60

Technical specifications ............................................................................ 61

8 NAMES OF PARTS

* This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces

clean. Please read the care and storage instructions in the back of this manual (p. 58).

Camera body

Shutter-release button

Lens*

The DC terminal (p. 13), video-

out terminal (p. 37), and USB

port (p. 47) are located behind

the terminal cover.

Self-timer lamp (p. 32)

Flash (p. 26)

Strap eyelet

(p. 10)

The tripod socket is located on the bot-

tom of the body.

Microphone

Viewfinder window*

Battery/ Card chamber door (p. 11, 16)

NAMES OF PARTS

Viewfinder* (p. 18, 24)

LCD monitor*

White balance/ Delete button (p. 25, 30)

Speaker

Mode dial

Display/ Enter button (p. 25, 27)

Indicator lamp

(p. 22)

Main switch

Flash-mode/ Copy button (p. 26, 36)

Zoom lever (p. 20)

Scroll-up button

Scroll-down button

Mode dial

Movie-recording mode (p. 31)

Program-recording mode (p. 32)

Auto-recording mode (p. 18, 26)

Playback mode (p. 24, 34)

Data-transfer mode (p. 46)

Setup mode (p. 38)

This dial gives direct and easy

access to the camera’s major

modes.

10 GETTING UP AND RUNNING

GETTING UP AND RUNNING

Always keep the strap around your wrist in the event that the camera is accidentally dropped.

Attaching the hand strap

Pass the other end of the strap through

the small loop and tighten (2).

Pass the small loop of the hand strap through the

strap eyelet on the camera body (1).

This digital camera uses two AA-size Ni-MH batteries or one CR-V3 lithium battery.When using Ni-

MH batteries, fully recharge them with a battery charger suitable for complex electronic equipment.

Although alkaline batteries can be used, their performance is very low and is not recommended for

normal use. Do not use other types of AA batteries.

When replacing the batteries, the camera should be turned off.

Close the battery-chamber door (3) and slide it

toward the body (4) to engage the safety catch.

Installing batteries

Insert the batteries as shown. Never

force the battery.

Open the battery-chamber door on the bottom of the camera by

sliding the door toward the side of the camera (1) to release the

safety catch; the door can then be opened (2).

CR-V3 lithium battery

AA-size

batteries

12 GETTING UP AND RUNNING

Battery condition indicator

Full-battery indicator - the battery is fully charged.

Replace-battery message - power is insufficient for camera operation. Indicator

lamp by the viewfinder turns red and blinks. Change the batteries.The shutter will

not release.

Low-battery indicator - battery power is low. The battery should be

replaced soon.

This camera is equipped with an automatic battery-

condition indicator. When the camera is on, the bat-

tery-condition indicator appears on the LCD monitor. If

it does not appear, the battery may be exhausted or

installed incorrectly.

Low-battery warning - battery power is very low.The icon is red.The

battery should be replaced as soon as possible.

Auto power off

To conserve battery power, the camera will shut down if an operation is not made within three min-

utes.To restore power, press the main switch.

When replacing batteries, the date information will reset if there are no batteries in the camera for a

few minutes. See page 14 if the date reset.

The AC Adapter AC-6 allows the camera to be powered from an electrical household outlet.The AC

Adapter is recommended when the camera is interfaced with a computer or during periods of heavy

use.

Always turn off the camera before changing between power supplies.

Connecting the AC adapter (sold separately)

Lift the terminal cover from the top (1).The cover is attached to the body

to prevent loss.

Insert the mini plug of the AC adapter into the DC ter-

minal (2).

Insert the AC adapter plug into an electrical outlet.

When the AC adapter is used, camera will shut down

if an operation is not made within 30 minutes.

14 GETTING UP AND RUNNING

Setting the language

Depending on the region, the menu language may have to be set. Four languages are available:

English, French, Spanish, and German.

Turn the mode dial to the setup position (1).

Turn the camera on (2).

Use the scroll buttons (3) to highlight the

appropriate language. Press the dis-

play/enter button (4) to select the lan-

guage.

MEMORY TYPE

LANGUAGE

VIDEO OUT

SELECT

SET UP

Setting the date and time

The camera’s clock and calendar must be set.When images are recorded, the image data is saved

with the date and time of recording.The date and time display blinks if the clock and calender are not

set.

Turn the mode dial to the setup position (1).

Turn the camera on (2).

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

LANGUAGE

Use the scroll buttons (3) to select the

language option. Press the display/enter

button (4) to open language screen.

SELECT

DELETE ALL

FORMAT

QUALITY

BUZZER

DPOF

DATE/TIME

SET UP

STYLE

CLOCK

SET UP

Use the scroll buttons (3) to select the date format. Press the dis-

play/enter button (4) to select the format.

The main setup menu is displayed. Highlight the date/time option

with the scroll buttons and press the display/enter button to contin-

ue.

Use the scroll buttons (3) to select the clock option. Press the dis-

play/enter button (4) to display the date/time setting screen.

MONTH / DAY

DAY / MONTH

SET UP

Use the scroll buttons (3) to select the style option.

Press the display/enter button (4) to continue.

Use the flash-mode/copy button (5) to select the item to be

changed. Use the scroll buttons (3) to adjust the item.

Pressing the white-balance/delete button (6) will close the

screen and cancel any changes made.

Use the scroll buttons (3) to select the date/time option.

Press the display/enter button (4) to open the date/time

screen.

When the correct date and time is displayed, press the display/ enter button (4) to set the

clock and calendar.

SELECT

:00

2003 / 1 / 1

ADJUST

CLOCK

SET

NEXT COPY

An SD Memory Card or MultiMediaCard, sold separately, can be inserted in the camera for

image storage.

16 GETTING UP AND RUNNING

Image storage

This camera has an 8MB internal memory where the image can be stored without the need

for a separate a memory card.To switch between the internal memory and a memory card,

see pages 38 and 45.

Always turn off the camera and confirm

the indicator lamp is not lit before

removing a memory card; damage and

data loss may result.

Open the card-slot door (1).

Insert the memory card all the way into the card slot until it stops (2). Insert the card so the

face is toward the front of the camera. Always push the card in straight. Never force the

card. If the card does not fit, check that it is oriented correctly.

The LCD monitor shows where the images will be

stored. “IN” indicates the internal memory and “EX”

indicates an external memory card.

If the card-protect message appears, the inserted card in the camera is locked.The card’s write-pro-

tect switch must be in the unlock position to use the card. If the memory-card-error message

appears, the inserted card may need to be formatted, or may not be compatible with this camera.To

format the memory card, see pages 38 and 40. A card used in another camera may have to be for-

matted before being used. See the card’s manual for details on card use.

Images are not transferred automatically to the memory card from internal memory when a memory

card is inserted.To copy the data, see page 36.

To remove a memory card, hold the edge of the card and pull it out straight (3).Take care when

removing the card as it becomes hot with use.

Close the card-chamber door and slide it toward the body (4) to engage the safety catch.

18 BASIC RECORDING AND PLAYBACK

BASIC RECORDING AND PLAYBACK

This section covers the basic operation of this camera.Thoroughly familiarize yourself with the opera-

tions in this section before moving on to the other sections in the manual.

Auto-recording mode display

Flash-mode

indicator (p. 26)

Digital-zoom display (p. 20)

Memory-type indicator (p. 45)

Frame counter (p. 18)

Image-quality display (p. 41)

Focus frame (p. 21)

Date/time (p. 14)

Date/time appears briefly when the mode

is changed.

Zoom scale

(p. 20)

Battery-condition

indicator (p. 12)

Exposure-compensation display (p. 28)

When the mode dial is turned to the auto-recording mode

position, the following display will appear in the LCD moni-

tor. Indicators are displayed when camera

settings are changed.

Frame counter

The frame counter cannot exceed 999. When the number of recordable images exceeds this, 999 will

be displayed. The frame counter will continue to count down when the number of recordable images

falls below one thousand.

White-balance indicator (p. 30)

While using the viewfinder or LCD monitor, grip the camera firmly with

your right hand while supporting the body with your left. Keep your

elbows at your side and your feet shoulder-width apart to hold the cam-

era steadily.

When taking vertical pictures, hold the camera so that the flash is

above the lens with the grip to the top.Take care not to cover the lens

with your fingers or the strap.

Handling the camera

Indicator lamp

The indicator lamp glows green when the camera is

turned on. When the shutter-release button is pressed

partway down, it shows the focus and flash status. See

page 22 for the details.

Viewfinder

Because the optical viewfinder and the lens are slightly

separated, the image seen through one is not exactly

the same as the other; this is called parallax. Parallax

can cause errors in framing at close distances and is

more pronounced at longer focal lengths. When the sub-

ject is closer than 0.4m (1.3ft) in the macro mode, the

use of the LCD monitor is recommended because it

does not suffer from parallax. If the viewfinder is used,

point the camera slightly upwards so that the top of the

image is aligned with the close-framing guide.

Close-framing guide

20 BASIC RECORDING AND PLAYBACK

This camera is equipped with a 6.2 to 18.6mm optical zoom.This is equivalent to a 38 to 114mm

zoom lens on a 35mm camera. In 35mm photography, focal lengths below 50mm are referred to as

wide-angle; the angle of view is larger than that of the human eye. Above 50mm is referred to as tele-

photo and makes distant objects appear closer.The effect of the optical zoom is visible in both the

viewfinder and LCD monitor.

Using the zoom lens

The zoom lens is operated by the zoom lever. Pressing

the right side (T) will zoom in to the telephoto position of

the lens. Pressing the left side (W) will zoom out to the

wide-angle position.The optical zoom position is indicat-

ed by the lower white section of the zoom scale in the

LCD monitor.

If the zoom lever is pressed toward the telephoto

position at the telephoto position of the optical

zoom, the digital zoom will activate; this is indicated

by the upper red section of the zoom scale.The

digital zoom extends the power of the telephoto

position of the optical zoom by up to 3X in 0.2X

increments.When the digital zoom is active, the

image magnification is displayed on the monitor.

Digital zoom images are interpolated to the set

image size.There can be some loss of quality with

images taken with the digital zoom.

Zoom scale

Digital zoom magnification

Zoom lever

Page is loading ...

Konica Minolta DiMAGE E223 User manual

Brand: Konica Minolta

Model: DiMAGE E223

Category: Bridge cameras

Type: User manual

This manual is also suitable for

E223

Download PDF

report

Konica Minolta DiMAGE E223 User manual

This manual is also suitable for

Konica Minolta DiMAGE E223 User manual

Related papers

Other documents