Sharp 20F640 User manual

Category
CRT TVs
Type
User manual

This manual is also suitable for

1
COLOR TELEVISION
MODEL
20F640
L OPERATION MANUAL L
B177 WJ
CONTENTS
PAGE
β€’ IMPORTANT INFORMATION/IMPORTANT
SAFEGUARDS .................................................. 2 ~ 4
β€’ Supplied Accessories .............................................. 5
β€’ Before Operating Your Television ............................. 5
β€’ Antenna Connections ........................................ 5 ~ 6
β€’ Quick Reference Control Operation ................... 7 ~ 8
β€’ EZ SETUP during First Use..................................... 9
β€’ Demo Mode ........................................................... 10
β€’ Accessing the MAIN MENU screen without
Remote Control...................................................... 10
β€’ Language ............................................................... 11
β€’ Sleep Timer ........................................................... 12
β€’ Video Adjust .......................................................... 13
β€’ Audio Adjust........................................................... 14
β€’ Audio Select................................................... 15 ~ 16
MTS (Multichannel TV Sound) ............................ 15
INTERNAL SPEAKER SWITCH ......................... 15
FAO (Fixed Audio Output) ................................... 15
PAGE
β€’ Closed Caption ...................................................... 17
β€’ Parental Control ............................................. 18 ~ 28
V-CHIP ........................................................ 18 ~ 25
View Timer .................................................. 26 ~ 28
β€’ Ch Setup ........................................................ 29 ~ 34
EZ Setup ............................................................. 29
Channel Setting .......................................... 30 ~ 32
Personal Preference ........................................... 33
Universal Plus Function ...................................... 34
β€’ Set Up ............................................................ 35 ~ 36
Energy Save ....................................................... 35
Blue Screen ........................................................ 36
β€’ Using the Video and Audio Input Jacks ......... 37 ~ 38
β€’ Using the Audio Output Jacks ............................... 39
β€’ Operation of Remote Control ......................... 40 ~ 44
β€’ Before Calling for Service ...................................... 45
β€’ Calling for Service ................................................. 45
β€’ Specifications ........................................................ 46
β€’ Limited Warranty .................................................... 60
This operating manual includes basic operating
instructions in Spanish and French.
SPANISH is on page 47 ~ 52.
FRENCH is on page 53 ~ 58.
2
Dimension: 140mm x 215mm
Welcome to the SHARP Family. We are pleased that you are now the owner of a SHARP Color Television
– built for outstanding quality, reliability and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passed
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAL
so that you may adjust the picture and color to your personal viewing preference.
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Color
Television set for years to come.
Please read these instructions carefully, and keep them handy for your future reference.
Model No.:
Serial No.:
IMPORTANT
To aid reporting in case of loss or theft, please record the TV’s
model and serial numbers in the space provided. The numbers
are located at the rear of the TV.
IMPORTANT INFORMATION
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST – WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and labor
warranty applicable to your purchase.
SECOND – CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall that
SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT β€œLIMITED WARRANTY” CLAUSE ON THE LAST PAGE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions are
in the papers with the
appliance.
β€œNote to CATV system installer: This reminder is provided to call the CATV system installer’s attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical.”
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not
expressly approved by the manufacturer could void the user’s authority to operate this
equipment.
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org
20F640 2
3
Dimension: 140mm x 215mm
IMPORTANT INFORMATION (Continued)
CAUTION:
β€’ Do not place the AC power cord under the TV set or other heavy items.
β€’ To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
β€’ To prevent fire or shock hazard, do not expose this products to dripping or splashing. No objects filled with
liquids, such as vases, should be placed on the product.
CAUTION: Please read all of these instructions before you operate your television and save
these instructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE
HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic
rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause
hazards.
4. Do not use this television equipment near water β€” for example, near a bath tub, washbowl, kitchen sink or
laundry tub, in a wet basement, or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing
serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand
recommended by the manufacturer or sold with the television equipment.
6. Television equipment and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the equipment and cart combination to
overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
insure reliable operation of the television equipment and to protect it from overheating, these openings must
not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a
bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not
be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television
equipment should never be placed near or over a radiator or heat register.
10. This television equipment should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your television dealer or local
power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger
than the other). The 2-wire polarized plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat
this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will
be abused by persons walking on it.
IMPORTANT SAFEGUARDS
20F640 3
4
Dimension: 140mm x 215mm
IMPORTANT SAFEGUARDS (Continued)
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the
National Electrical Code provides information with respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch
dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to
restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance β€” this indicates a need for
service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to
perform routine safety checks to determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
ELECTRIC
SERVICE
EQUIPMENT
NECβ€”NATIONAL ELECTRICAL CODE
GROUND
CLAMP
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
20F640 4
5
5
Dimension: 140mm x 215mm
Supplied Accessories
321
654
987
100
0
TV β€’ CATV β€’ VCR β€’ DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
Infrared Remote Control/Part Number
RRMCGA108WJSA
Dry batteries size β€œAA”/
1.5 V cc
Before Operating Your Television
Location
β€’ For normal operation, your TV should be located in an area of the room where cool adequate ventilation
is provided. Do not place the back of the television set in a place where free airflow will be restricted.
β€’ Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys
using magnets or any other magnetic substance, such as iron are kept well away from the TV set.
Power
Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you
are unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an
electrician. Do not defeat the safety feature of the polarized plug.
Note:
β€’ If the set will not be used for a long period, such as during a vacation, unplug the set from the wall
outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the
POWER BUTTON in the OFF position.)
β€’ Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located
near the TV and both radio and TV broadcasts are being received. Should such noise appear, turn
off either the TV or the radio.
β€’ If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received
due to interference from the TV.
L Before using the television, prepare the Remote Control
To use the remote control, insert batteries first.
Insert the batteries
β€’
With your thumbnail, pull up the slit as indicated by the arrow to remove the back cover. Insert two batteries
(size β€œAA”/1.5 V cc). Be sure to match the battery
e
/
d
terminals with the
e
/
d
marks inside the compartment.
Baterry
Cover
Antenna Connections
Antennas
β€’ The antenna requirements for good color television reception are more important than those for black
& white television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various
antenna systems:
1. A 75 ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).
2. A 300 ohm system is a flat β€œtwin-lead” cable that can be
attached to a 75 ohm terminal through a 300-75 ohm
ADAPTOR (not supplied).
F-type connector
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
Pull up
20F640
6
6
Dimension: 140mm x 215mm
Antenna Connections (Continued)
OUTDOOR ANTENNA CONNECTION
β€’ Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
β€’ Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of
the TV set.
PR
PB
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
REAR OF TV
75-ohm
coaxial cable
300-ohm
twin-lead
VHF/UHF ANTENNA
VHF/UHF ANTENNA
A. Combination VHF/UHF Antennas
300/75-ohm
ADAPTOR
(Not supplied)
or
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDEO
R
L
COMPONENT
IN OUT
300-ohm
twin-lead
300-ohm
twin-lead
75-ohm coaxial
cable
VHF
ANTENNA
UHF
ANTENNA
COMBINER
(not supplied)
or
REAR OF TV
B. Separate VHF/UHF Antenna
NOTICE
F-type connector should be finger tightened only
When connecting the RF cable to the TV set, do not tighten
F-type connector with tools.
If tools are used, it may cause damage to your TV set.
(The breaking of Internal circuit, etc.)
F-type connector
75-ohm coaxial cable
CABLE TV (CATV) CONNECTION
β€’ A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm
coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.
β€’ Some cable TV companies offer β€œpremium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by
the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled
channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your
cable TV company. One possible method of utilizing the converter/descrambler provided by your
cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
β€œA” position on the RF switch (not supplied): You can view all unscrambled channels using the TV’s
channel keys.
β€œB” position on the RF switch (not supplied): You can view the scrambled channels via the converter/
descrambler using the converter’s channel keys.
OUT
OUT
RF switch (not supplied)
Cable TV Line
IN
Two-set
signal
splitter
(not
supplied)
Cable TV converter/
descrambler
(not supplied)
A
IN
B
Note:
β€’
Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
20F640
P
R
P
B
Y
IN 1
LINE
OUT
R
L
AUDIO
VIDE O
R
L
COM PO NE NT
P
R
P
B
Y
IN 1
L INE
OU T
R
L
AU DIO
VI DE O
R
L
C OMP ON EN T
7
Dimension: 140mm x 215mm
Quick Reference Control OperationQuick Reference Control Operation
Note:
COMPONENT (VIDEO) TERMINALS
β€’
Part Names
Front Panel
VIDEO/AUDIO
TERMINALS
IN 2
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
POWER
Press β†’ On.
MENU
Press β†’ Accesses MAIN MENU.
Press again β†’ Exits MAIN MENU.
INSIDE DOOR
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
IN 1 (VIDEO/AUDIO) TERMINALS
LINE OUT (AUDIO) TERMINALS
REMOTE CONTROL
20F640 7
β€’ The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
To open the door
Using the projection located under the "PULL-OPEN" indication,
pull and lift the door open.
To close the door
Using the projection, lower the door until closed.
Caution:
β€’ When opening or closing the door, do not insert your fingers into
the gap between the door and front panel. This may result in an
injury.
Rear Panel
ANTENNA/CABLE INPUT
SENSOR
Press again β†’ Off.
TERMINAL
321
654
987
100
0
TV β€’ CATV β€’ VCR β€’ DVD
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
REC
PLAY
:
L
STOP
FWD
)
REW
(
PAUSE
J
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
8
Dimension: 140mm x 215mm
Quick Reference Control Operation
β€’
Part Names
Quick Reference Control Operation (Continued)
Note:
β€’ The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
β€’ The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
β€’ The degree of illumination will vary depending on the strength of lighting used.
β€’ The degree of illumination will decrease with time and depending on the temperature.
β€’ The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
β€’ Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
POWER
Press β†’ On.
Press again β†’ Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
β€’ Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press β†’ Accesses MAIN MENU.
Press again β†’ Exits MAIN MENU.
MUTE
Press β†’ Mutes sound.
Press again β†’ Restores sound.
β€’ When sound is muted, CLOSED
CAPTION appears if available.
POWER (DVD/VCR)
Press β†’ On.
Press again β†’ Off.
DVD/VCR CONTROL
(See page 40.)
Infrared Transmitter Window
CATV/DVD-TV/VCR MODE buttons
Press TV/VCR β†’ Signals sent will be for
TV and VCR control.
Press CATV/DVD β†’ Signals sent will be
for cable TV converter and DVD control.
DISPLAY
Press β†’ Displays receiving channel for
4 seconds.
Press again β†’ Removes display.
β€’ Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press β†’ Switches to external video
INPUT 1 mode.
Press twice β†’ Switches to external video
INPUT 2 mode.
Press 3 times β†’ Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times β†’ Switches back to the
original TV mode. (See page 38.)
ENTER
Used in some instances where a Cable
Converter Box requires an β€œenter”
command after selecting channels, when
using the REMOTE KEYPAD button.
(See page 40.)
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
β€’ See pages 30–32 for Channel Setting.
β€’ Moves the β€œE” mark on the MENU
screen
SKIP/VCR-CH
(See page 40.)
REC
(See page 40.)
20F640 8
9
1 Press
POWER
on the TV set or on the Remote Control to turn on
the TV. The SELECT LANGUAGE mode will be displayed.
2 Press to select β€œENGLISH”, β€œSPANISH
(ESPAΓ‘OL)” or β€œFRENCH (FRANCAIS)”.
3 Press to SET LANGUAGE and access EZ SETUP
mode.
4 Press
The tuner will automatically search for the broadcast
and cable TV channels. (The CH No. will automatically
increase when it appears.)
If you want to stop the EZ SETUP process once it has
started, press
and it will be canceled.
If you want to SETUP again, please refer to page 29
on CH SETUP.
To cancel EZ SETUP
Press
5 Once EZ SETUP is completed, the lowest channel number
memorized will be displayed.
Note:
8 / 9
SE
LLAANG GEUECT
E
NGL SHI
E
SPA OLΓ‘
F
RAN A SIC
S
ELE T CH:
S
ET VOL+/ –:
C
8 / 9
SE
LLAANG GEUECT
E
NGL SHI
E
SPA OLΓ‘
F
RAN A SIC
S
ELE T CH:
S
ET VOL+/ –:
C
CO
NTANNT NA ORENE
CA
BLE
C
S
T
E
ZART
S
ETUP?
S
TOP S ARTT
PL
EWAITASE
A
U
R
OG GTO P
5
21
R
AMM I N
S
TOP S ARTT
2
;
:
VOL
–
VOL
+
:
VOL
+
321
654
987
100
0
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
FLASHBACK
POWER (DVD/VCR)
POWER
DISPLAY
CATV
INPUT
TV
DVD VCR
ENTER
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
POWER
POWER
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
(EZ SETUP mode)
EZ SETUP during First Use
(On the Set)
(Remote Control)
(SELECT LANGUAGE mode)
CH
8
9
CH
CH a/s
VOL k/l
VOL l
VOL k
β€’ If EZ SETUP does not memorize all the channels in your region, please refer to page 30 for more
information on manually memorizing the channels using CHANNEL SETTING.
β€’ It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is
incorrect or frequency jamming is occuring around the area. Please refer to pages 30 ~ 32 for more
information on manually memorizing the channels using CHANNEL SETTING.
VOL l
9
Dimension: 140mm x 215mm
L When you turn on the TV for the first time, it will automatically
memorize the broadcast channels.
Please perform the following instructions before pressing the
POWER button.
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 5 ~ 6)
(3) Plug in the AC POWER cord to the wall outlet.
20F640
10
Demo Mode
β€’ To quickly learn more about the TV set, press and hold for
more than three seconds both and or
MENU
on the TV set. The TV set will go into DEMO mode and
briefly explain the various features.
β€’ To cancel DEMO mode, again press and hold for more than
three seconds both or
MENU
on the TV set.
Example:
DEMO mode display
Note:
β€’ Without signal on COMPONENT IN, video input and antenna in, the DEMO mode cannot be activated.
Accessing the MAIN MENU screen without Remote Control
β€’ If you misplaced your Remote Control you can still access most settings via
the MAIN MENU screen when you press
MENU
on the TV set.
β€’ Some features of your TV set will not be accessible without the Remote Control.
If you lost your Remote Control, contact a Sharp Service Center for a
replacement.
(On the Set)
C
F
o
r
m
o
e
m
SHARP
SHARP
P
M
r
i
o
n
d
d
uc
t
s
s
(On the Set)
MENU
button
or
CH s CH a
CH a/s
10
Dimension: 140mm x 215mm
20F640
CH a/s
buttons
MENU
button
11
11
Dimension: 140mm x 215mm
L The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the β€œa” mark to β€œSETUP”.
3 Press to access SETUP mode.
4 Press to access LANGUAGE change mode.
5 Press to select β€œENGLISH”, β€œSPANISH
(ESPAΓ‘OL)” or β€œFRENCH (FRANCAIS)”.
6 Press
MENU
to exit.
Language
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O ADJUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
SET PU
LANG GUA E
ENERGY SAVE
BLUE SCREEN
L
ENGL HIS
ANG GUA E
ESPAΓ‘OL
FRAN A ICS
(SETUP mode)
(LANGUAGE change mode)
I
ENGL HIS
DIOMA
ESPAΓ‘OL
FRAN A ICS
MENU
CH
8
9
CH
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
MENU
CH a/s
CH a/s
VOL k/l
VOL k/l
20F640
12
12
Dimension: 140mm x 215mm
L You can preset your television to turn off automatically in increments of 30, 60, 90 or 120
minutes.
1 Press
MENU
to access the MAIN MENU screen.
2 Press to access SLEEP TIMER mode.
3 Press to set a sleep time of 30, 60, 90 or 120 minutes.
4 Press
MENU
to exit.
Note:
β€’ To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select β€œβ€“ – – M REMAIN”
during step 3.
β€’ While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular
intervals or when the remote’s DISPLAY key is pressed.
Sleep Timer
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
SLEEP T I MER
12 M0AREM NI
(SLEEP TIMER mode)
;
:
VOL
–
VOL
+
β†’
MENU
;
:
VOL
–
VOL
+
MENU
VOL k/l
VOL k/l
20F640
13
13
Dimension: 140mm x 215mm
Description of Adjustment Items
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the β€œa” mark to β€œVIDEO
ADJUST”.
3 Press to access PICTURE adjust mode.
4 Press to select the desired mode.
(Refer to the diagram below.)
5 Press to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
Note:
β€’ VIDEO ADJUST setting is available for AIR or CABLE/INPUT 1/INPUT 2 and COMPONENT respectively.
Video Adjust
Selected button button
item
PICTURE To increase contrast To decrease contrast
TINT To make skin tones greenish To make skin tones purplish
COLOR To increase color intensity To decrease color intensity
BRIGHT To increase brightness To decrease brightness
SHARP To increase sharpness To decrease sharpness
COLOR To choose a MH, HIGH, LOW or ML COLOR TONE.
TEMP.
RESET To return all adjustments to factory preset levels.
ABCD
PERSONAL PREFERENCE
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
PICTURE
_______
27
VOL UP (+)
increase contrast
PICTURE
TINT
COLOR
SHARP
COLOR TEMP.
RESET
: CH 9
: CH 8
BRIGHT
PICTURE
_______
27
VOL DOWN (–)
decrease contrast
β†’
CH
8
9
CH
MENU
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
MENU
(PICTURE adjust mode)
VOL l
CH a/s
VOL k
VOL k/l
VOL k/l
VOL l
CH a/s
VOL k
VOL k/l
VOL k/l
CH a/s
20F640
14
14
Dimension: 140mm x 215mm
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the β€œa” mark to β€œAUDIO
ADJUST”.
3 Press to access TREBLE adjust mode.
4 Press to select the desired mode.
(Refer to the diagram below.)
5 Press to adjust the setting.
6 Repeat steps 4 to 5 to adjust other settings.
7 Press
MENU
to exit.
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
Audio Adjust
(MAIN MENU screen)
Selected item button button
TREBLE To increase treble response To decrease treble response
BASS To increase bass response To decrease bass response
BALANCE To emphasize the right speaker’s volume To emphasize the left speaker’s volume
RESET To return all adjustments to factory preset levels.
β†’
CH
8
9
CH
MENU
TRE E 0BL
(TREBLE adjust mode)
TREBLE
RESET
BASS
BALANCE
TRE E 0BL
;
:
VOL
–
VOL
+
CH
8
9
CH
;
:
VOL
–
VOL
+
MENU
VOL k
VOL l
VOL k/l
CH a/s
VOL k/l
CH a/s
20F640
15
15
Dimension: 140mm x 215mm
Audio Select
L MTS (Multichannel TV Sound)
This circuit allows reception of stereo or bilingual TV sound.
L INTERNAL SPEAKER SWITCH
This function turns the TV’s internal speakers β€œON” or β€œOFF” when listening to sound from
external speakers by using the AUDIO OUTPUT JACKS on page 39.
L FAO (Fixed Audio Output)
This function turns the TV’s internal speakers β€œOFF” and allows fixed audio output from the
AUDIO OUTPUT JACKS on page 39. With FAO, the TV’s volume control is disabled.
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the β€œa” mark to β€œAUDIO
SELECT”.
3 Press to access AUDIO SELECT mode.
4 Press to move the β€œa” mark to β€œMTS”,
β€œSPEAKER” or β€œFAO”.
5 Press to select β€œSTEREO”, β€œSAP” or β€œMONO” when
the β€œa” mark is at β€œMTS” position.
6 Press
MENU
to exit.
Ex: Actual screen indicating ON AIR when receiving STEREO
broadcasts
Actual channel number
β€œβ† ON AIR” will appear next to STEREO or
SAP when receiving STEREO or SAP broadcasts.
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
AUD I O SELECT
MTS : SAP
FAO F:O F
SPEAKER : ON
(AUDIO SELECT mode)
AUD I O SELECT
MTS : STEREO
FAO F:O F
SPEAKER : ON
MTS
STEREO
SAP
MONO
SPEAKER
ON
OFF
FAO
ON
OFF
MENU
12
STE EO ON A I RR
MONO
SAP ON A I R
(CHANNEL call on screen)
MENU
β†’
CH
8
9
CH
CH
8
9
CH
(AUDIO SELECT mode)
β†’
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
VOL k/l
CH a/s
CH a/s
VOL k/l
20F640
16
16
Dimension: 140mm x 215mm
Audio Select (Continued)
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.
β€’ Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can be received in dynamic stereo
sound.
β€’ SAP broadcasts
Television broadcast can be received with either MAIN or SAP sound.
MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)
SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)
L If stereo sound is difficult to hear.
β€’ You can obtain clearer sound by manually switching to the fixed monaural mode.
Note:
β€’ Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo
broadcast. You must switch the mode back to STEREO if you want to hear stereo sound again.
β€’ MTS while in the INPUT mode does not change the type of sound; in this case, sound is determined
by the video source.
β€’ If the β€œFAO” mode is selected β€œON”, the β€œSPEAKER” mode will automatically turn β€œOFF”.
β€œSPEAKER” selecting will not affect β€œFAO” mode.
20F640
17
17
Dimension: 140mm x 215mm
Closed Caption
L HOW TO SET CLOSED CAPTION
β€’ Your TV is equipped with an internal Closed Caption decoder. β€œClosed
Caption” is a system which allows you to view conversations, narration,
and sound effects in TV programs and home videos as subscript on
your TV screen as shown on the right.
β€’ Not all the programs and videos will offer closed caption. Please look
for the β€œ ” symbol to ensure that captions will be shown.
β€’ Closed Caption broadcast can be viewed in two modes: CAPTION
and TEXT. For each mode, two channels are available, CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries of TV
dramas and news programs while allowing clear view of the picture.
The [TEXT] mode displays over the picture other various information
(such as TV program schedule, weather forecast, etc.) that is
independent of the TV programs.
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the β€œa” mark to β€œCLOSED
CAPTION”.
3 Press to access CLOSED CAPTION setting mode.
4 Press to move the β€œa” mark to either
β€œMODE” or β€œDATA”.
5 Press to change the CLOSED CAPTION setting.
MODE: DATA:
6 Press
MENU
to exit.
Note:
β€’
If a broadcast has CLOSED CAPTION and the
MUTE
button is pressed, the set enters [CAPTION] mode
automatically. Pressing
MUTE
again will return the set to its previous condition.
β€’
CLOSED CAPTION may malfunction (white blocks, strange characters, etc.) if signal conditions are poor or if
there are problems at the broadcast source. This does not necessarily indicate a problem with your TV.
β€’
If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION broadcast, the
CLOSED CAPTION will disappear momentarily.
β€’
When viewing in TEXT mode, if no TEXT broadcast is being received, for some programs the screen may
become dark and blank. Should this occur, set the CLOSED CAPTION mode to β€œOFF”.
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
(MAIN MENU screen)
CH
8
9
CH
β†’
MENU
CLOSED CAPT I ON
MOD E : C A P
DATA : CH1
TION
(CLOSED CAPTION setting mode)
;
:
VOL
–
VOL
+
CLOSED CAPT I ON
MOD E : C A P
DATA : CH1
TION
CH
8
9
CH
CAPTION
TEXT
OFF
CH 1
CH 2
CLOSED CAPT I ON
MOD E : C A P
DATA : CH1
TION
;
:
VOL
–
VOL
+
MENU
VOL k/l
CH a/s
CH a/s
VOL k/l
20F640
18
18
Dimension: 140mm x 215mm
Note:
β€’ MPAA RATING is only age based ratings.
[2] TV PARENTAL GUIDELINES
RATING
y
content base
x
AGE D L S V FV
(Sexually (Adult (Sexual (Violence) (Fantasy
Suggestive Language) Situation) Violence)
Dialog)
TV-Y (All children) V –––––
TV-Y7 (Direct to Older Children) V ––––V
E
TV-G (General Audience) V –––––
Age TV-PG (Parental Guidance
VV V V V –
base Suggested)
D
TV-14 (Parents Strongly
VV V V V –
Cautioned)
TV-MA (Mature Audience Only) V – VVV –
V : Content Rating can be set.
– : Content Rating cannot be set (not normally broadcast by TV station).
Parental Control (V-CHIP Operation)
L V-CHIP
β€’ This function allows you to restrict TV programs and also allows you to control TV usage based on
FCC data. This function is to prevent your children from watching violence or sexual scenes that may
be harmful.
β€’ Restriction of TV programs includes two characters that contain information about the program’s
MPAA rating and the TV Parental Guidelines. MPAA is restricted by age. TV Parental Guidelines are
restricted by age and contents.
β€’ Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for
complete control.
[1] MPAA RATING
RATING
G GENERAL AUDIENCES. All ages admitted.
PG PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for
children.
age PG-13 PARENTAL STRONGLY CAUTIONED. Some material may be inappropriate
base for children under 13.
R RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NC-17 NO ONE 17 AND UNDER ADMITTED.
X X Rating is an older rating that is unified with NC-17 but may be encoded on
older movie’s data.
β€’ MPAA RATING (Example)
Example 1.
β€œPG-13” in the age based RATING is blocked,
this will automatically block the high ratings
β€œR”, β€œNC-17”, β€œX” also.
Example 2.
β€œR” in the age based RATING is blocked, this
will automatically block the high rating β€œNC-
17”, β€œX” also.
1. User setting 2. Block table
PG
age
base
not to
block
not to
block
Select
block
auto-
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
– – – – –
– – – – –
BLOCK
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
1. User setting 2. Block table
PG
age
base
not to
block
not to
block
not to
block
Select
block
auto-
block
auto-
block
G
G
PG
PG-13
R
NC-17
X
– – – – –
– – – – –
– – – – –
BLOCK
BLOCK
BLOCK
PG-13
R
NC-17
X
20F640
19
19
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation Continued)
β€’ TV-PARENTAL GUIDELINES (Example)
Example 1.1 : Age Based setting
Go through all select ratings and select unblocked for β€œAGE”.
This will automatically unblock everything.
Example 1.2 : Age Based setting
For β€œTV-G” select β€œBLOCK” for β€œAGE”. This will automatically block the
higher age ratings β€œTV-PG”, β€œTV-14” and β€œTV-MA” as well as
β€œTV-G”.
Furthermore, the content ratings β€œD”, β€œL”, β€œS”, β€œV”, β€œFV” are automatically
blocked as well for β€œTV-PG”, β€œTV-14” and β€œTV-MA” as well as β€œTV-G”.
Example 2.1 : Content Based setting
For β€œTV-PG”, β€œTV-14” and β€œTV-MA” select unblocked for each content
ratings (β€œD”, β€œL”, β€œS”, β€œV”, β€œFV”) by leaving β€œAGE” unblocked for
β€œTV-PG”, β€œTV-14” and β€œTV-MA”. If you choose to unblock for each one in
content base.
Example 2.2 : Content Based setting
Then for β€œTV-PG” and select β€œBLOCK” for only β€œV” (Violence). This will
automatically block the higher ratings β€œTV-14-V” and β€œTV-MA-V”
(β€œTV-14” and β€œTV-MA” for Violence content only).
Please note that with these settings blocking does NOT occur. If a program
is rated only β€œTV-MA”; it must be rated β€œTV-MA-V” to be blocked.
Example 3 : Reset an Age Based setting
For β€œTV-14” and select again β€œBLOCK” for β€œAGE”.
This will again automatically block the content ratings β€œD”, β€œL”, β€œS”, β€œV”,
β€œFV” for β€œTV-MA” as well as β€œTV-14”.
Please note that the lower age rating β€œTV-PG” did not change from its
previous settings.
Note:
β€’ Content ratings can be modified but only in the combinations indicated by an V in the table on page
18.
β€’ Changing a lower age rating’s content setting to β€œBLOCK” automatically changes the same higher
age rating’s content setting to β€œBLOCK” regardless of their previous settings.
β€’ Changing a lower rating’s β€œAGE” setting to β€œBLOCK” automatically changes all higher ratings to β€œBLOCK”
regardless of their previous settings.
β€’ Any rating’s β€œAGE” set to unblocked must have its content settings individually set.
[3] ADDITIONAL MODE
Besides the above β€œMPAA RATINGS” and β€œTV PARENTAL GUIDELINES” new ratings system’s data
can be downloaded when they become available. (See page 22.)
EDLSVFVGA
TV– Y7
––––
–
–
–
–
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
V
V
V
V
V
V –
V
V
V
V –
–
V
V
V –
V
V
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
–
–
–
–
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
V –
V –
–
V –
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
EDLSVFVGA
TV– Y7
––––
–
V
V
V
V –
–
V
V
V –
V
V
V:BLOCK
TV– Y –––––
TV– G
TV GP–
–––––
TV– 41
TV– AM
RET RNU
20F640
20
20
Dimension: 140mm x 215mm
Parental Control (V-CHIP Operation Continued)
L HOW TO SET V-CHIP
[1] MPAA RATING
1 Press
MENU
to access the MAIN MENU screen.
2 Press to move the β€œa” mark to
β€œPARENTAL CONTROL”.
3 Press to access PARENTAL CONTROL mode.
4 Press to access V-CHIP BLOCK select mode, then
press to select β€œMPAA RATING”.
5 Press to move the β€œa” mark to β€œPG”,
then press to select BLOCK. If you set β€œPG” to
BLOCK, β€œPG-13”, β€œR”, β€œNC-17” and β€œX” are automatically blocked.
6 Press to move the β€œa” mark to "RETURN",
then press to exit V-CHIP BLOCK select mode.
Note:
Ex.
β€’ If you set β€œG” to BLOCK , all RATING are automatically blocked.
β€’ If you set β€œX” to BLOCK, β€œG”, β€œPG”, β€œPG-13”, β€œR” and β€œNC-17” are not blocked.
(MAIN MENU screen)
MENU
β†’
CH
8
9
CH
(PARENTAL CONTROL mode)
β†’
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
321
654
987
100
0
FLASHBACK
ENTER
9
VCR-CH
8
POWER (DVD/VCR)
;
:
CH
8
VOL
–
VOL
+
9
CH
MENU MUTE
g
SKIP
f
ABCD
PERSONAL PREFERENCE
CHANNEL
UP (8)/
DOWN (9)
MENU
VOLUME
(+)/(–)
REMOTE
KEYPAD
MENU
SLEEP T IMER
VIDEO ADJUST
AUD I O AD JUST
AUD I O SELECT
CLOSED CAPT
CH TSE UP
ION
PAREN
SETUP
TAL CON ROLT
PARENT CONTOLAL
V – CH I P B LOCK
VIEW TIMER
V – CH I P OCKLB
MPAA
TV UGI
OP OINT
DEL I NES
SEC ERT ––No .
STA UTSO:FF
: ––
(V-CHIP BLOCK select mode)
MPAA
G
PG
PG 31–
R
N
X
–
B
B
B
B
B
:
:
:
:
:
:
–
O
O
O
O
O
–
C
C
C
C
C
–
K
K
K
K
K
–
L
L
L
L
L
C – 71
RET RNU
;
:
VOL
–
VOL
+
;
:
VOL
–
VOL
+
β†’
CH
8
9
CH
MPAA
G
PG
PG 31–
R
N
X
–
B
B
B
B
B
:
:
:
:
:
:
–
O
O
O
O
O
–
C
C
C
C
C
–
K
K
K
K
K
–
L
L
L
L
L
C – 71
RET RNU
;
:
VOL
–
VOL
+
β†’
CH
8
9
CH
VOL k/l
CH a/s
VOL k/l
VOL k/l
CH a/s
VOL k/l
VOL k/l
CH a/s
20F640
1 / 1

Sharp 20F640 User manual

Category
CRT TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document