GRABER 173Z Owner's manual

USER MANUAL

Please READ and FOLLOW all instructions carefully.

Model #173

Cautions:

1) Read and follow instructions carefully. Save owner’s manual for future reference or parts information.

2) Be certain any future user of this carrier is aware of correct attachment and use.

3) Vehicle should be in good condition in the area at which the hitch is located. Refer to table on cover page for load capacities and limita-

tions.

4) Make sure bike tires are not directly behind exhaust pipe.

5) Do not exceed maximum load capacity of the carrier.

6) This hitch mounted carrier is not recommended for off road use.

7) Do not mount on any type of trailer.

8) Do not take carrier through car wash.

9) Replace straps at the first sign of wear. Replacement parts are available by contacting Graber at (800) 783-7257.

10) It’s the consumers responsibility to ensure that the use of this rack complies with local regulations, regarding issues such as distance

behind vehicle & partial covering of license plate and tail lights

Warning and Disclaimer:

This carrier has been designed to carry bicycles on specific vehicles. Before installation, user must read and follow enclosed instructions. User

must attach carrier correctly to the vehicle, check its attachment before each use, and inspect carrier parts for wear. Carrier’s attachment to the

vehicle is critical and beyond the control of the manufacturer. Manufacturer and seller expressly disclaim any and all liability for personal injury,

property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance,

or neglect of this carrier.

Warranty:

Saris Cycling Group, Inc. (“Saris”) warrants that your Mass 173 Rack will be free from defects in materials and workmanship for one year from

date of purchase. (Please retain your sales slip for your records.) This warranty only extends to the original consumer buyer.This warranty

does not apply to parts that have worn out through normal use or been damaged through misuse, abuse, neglect, accident or unauthorized

modifications or alterations.ANY IMPLIED WARRANTIES WHICH THE BUYER MAY HAVE ARE LIMITED IN DURATION TO THE TIME THAT

THE ORIGINAL CONSUMER BUYER OWNS THE PRODUCT. Some states do not allow limitations on how long an implied warranty lasts, so

the above limitation may not apply to you. At its option, Saris will repair or replace, or refund the purchase price of, any Mass 173 Rack which

is defective or fails to conform with this warranty under normal use and service. To obtain service under this warranty, contact Saris at our

toll-free Warranty Hotline (1-800-783-7257) and we will determine what parts you need and instructions on how to get repairs or a replacement

part, or whether a refund will be given.

Repair or replacement of a defective Mass 173 Rack, or refund of the purchase price, shall be the sole remedy of the buyer under this

warranty, and in no event shall Saris be liable for incidental or consequential damages, losses or expenses. Some states do not allow the

exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives

you specific legal rights, and you may also have other rights which vary from state to state.

20179B 01/12

Saris Cycling Group, Inc.

5253 Verona Road Madison, WI. 53711

800-783-7257

www.saris.com

Hitch Rack

DON’T GO BACK TO THE STORE! If you have any questions about your new bike rack, please contact us at 1-800-783-7257. We can help you more quickly if you have your

model number and assembly instructions ready when calling.

Patents:

Made in USA

Accessories

Sold Separately, call 800-783-7257 for information.

2060 Protect-O-Pads

• Foamblocksseparateand 

protect bikes and vehicles

• Setof4perpackage

3037 Bike Beam

Attaches from the seat post to stem

of the bike creating the standard top

tube of a men’s style frame. Ideal

for unique, women’s & kid’s small

frames and bikes with over-sized

tubes

3033 Wheel Stabilizing Strap

• Keepshandlebarsfromturningwhileintransit

• Keepswheelfromspinning

• Easybuckleclosure(Twoperpackage)

Tongue Weight Limitations

Hitch Type Tongue Weight Maximum Load

1-1/4”

200 lbs.

2”

300 lbs.

3 bikes/105 lbs.

Tongue Weight Limitations

Hitch Type Tongue Weight Maximum Load

1-1/4”

200 lbs.

2”

300 lbs.

4 bikes/140 lbs.

Model #174

Model #172

Mount Carrier to Vehicle

 • Shownbelowarethedifferentpossiblepositionsformountingmens,womens,andnon-traditionalstyleframes.

 • CheckClearance.Bikemustresthighenoughtoallowbiketires12-15”ofgroundclearance.It’srecommendedto

load smallest bikes last.

 • Tousetiltandreleasefeatures,removecotterandclevispinsandtiltcarrierawayfromvehicle.Note:Donottilt

carrier with bikes mounted.

 • Armsmaybefoldeddownwhennotinuse.Loosenknobenoughtoallowarmtopivittoadownwardpositionand

then retighten knob.

Check Carrier Straps & Stability

Mount Arms to Carrier

 •Slidewasherontothreadsofknob,insertintoarm,andthreadknobintobasetubeasshownbelow.

 •Rightarmsassembledinthesameway.

Load and Secure Bikes

 • Coverinnerpedaloffirstbiketoavoidscratchingvehiclefinish.We

recommend 2060 Protect-O-Pads (sold separately) see back page. It

is the consumers responsibility to ensure adequate protection

exists between the bikes and vehicle and between bikes being carried.

 • Placebikesoncarrierarmsinbikeholddowns,

alternating direction of handlebars (fig. 4b).

 • Oncebikesareinholddowns,pullholddown

strap over frame and secure to tabs on the hold

down.

Correct Block

Placement

Incorrect Block

Placement

Note: Be sure all four tabs on the

holdown are poking through and

are secure.

Additional Notes

Knob

Washer

Figure4

Receiver Tube

•AssembleHitch-TiteasillustratedinFig.3,

securing receiver to hitch.

•AssemblerackasshowninFig.1andFig.2.

NOTE: Your rack includes an adapter block to allow your rack

to fit into a 2” receiver hitch. You only need to follow Fig. 4 if

you have a 2” receiver hitch.

•Slideadapterblock

over the receiver tube

as shown. Note correct

block placement. Bolt

threads will not engage if

used incorrectly.

1 1/4” receiver

NUT

Base

Tube

2” ONLY

Attachment Block

Bolt

Receiver tube

Clevis Pin

Bolt

Cotter Pin

NOTE: Your rack includes an adapter block to allow

your rack to fit into a 2” receiver hitch. You only need

to follow Fig. 4 if you have a 2” receiver hitch.

Figure1

HitchTite

Washer

RECEIVER

VEHICLE HITCH

For 1-1/4” Hitch

GRABER 173Z Owner's manual

Related papers

Other documents