Olympus FE-25 User manual

Olympus
Brand
Olympus
Model
FE-25
Category
Bridge cameras
Type
User manual
Printed in China VN200701
DIGITAL CAMERA
FE-25/X-20
● Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a
safe place for future reference.
● We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
● In the interest of continually improving our products, Olympus reserves
the right to update or modify information contained in this manual.
● The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
Instruction Manual
Preparing the Camera
“Preparing the Camera” (p. 10)
Names of Parts ................................. 6
Preparing the Camera .................... 10
Shooting, Playback, and Erasing
... 14
Using Shooting Modes ................... 17
Using Shooting Functions ............. 19
Using Playback Features ............... 22
Menus for Shooting Functions ...... 23
¾
¾
¾
¾
¾
¾
¾
Menus for Playback, Editing, and
Printing Functions .......................... 27
Menus for Other Camera Settings
.. 29
Printing ............................................ 32
Using OLYMPUS Master 2.............. 37
Usage Tips ...................................... 39
Appendix ......................................... 43
Index ................................................ 56
¾
¾
¾
¾
¾
¾
¾
ContentsContents
Step
2
Shooting and Playing Back Images
“Shooting, Playback, and Erasing” (p. 14)
Step
3
How to Use the Camera
“Three Types of Setting Operations” (p. 3)
Step
4
Printing
“Direct printing (PictBridge)” (p. 32)
“Print Reservations (DPOF)” (p. 35)
Step
5
2
EN
Checking the contents of the box
Step
1
Other accessories not shown: Instruction Manual (this manual), warranty card.
Contents may vary depending on purchase location.
Digital camera
USB cable
microSD
Attachment
Strap
OLYMPUS Master 2
CD-ROM
Two AA batteries
Printed in China VN200701
DIGITAL CAMERA
FE-25/X-20
● Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a
safe place for future reference.
● We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
● In the interest of continually improving our products, Olympus reserves
the right to update or modify information contained in this manual.
● The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
Instruction Manual
Preparing the Camera
“Preparing the Camera” (p. 10)
Names of Parts ................................. 6
Preparing the Camera .................... 10
Shooting, Playback, and Erasing
... 14
Using Shooting Modes ................... 17
Using Shooting Functions ............. 19
Using Playback Features ............... 22
Menus for Shooting Functions ...... 23
¾
¾
¾
¾
¾
¾
¾
Menus for Playback, Editing, and
Printing Functions .......................... 27
Menus for Other Camera Settings
.. 29
Printing ............................................ 32
Using OLYMPUS Master 2.............. 37
Usage Tips ...................................... 39
Appendix ......................................... 43
Index ................................................ 56
¾
¾
¾
¾
¾
¾
¾
ContentsContents
Step
2
Shooting and Playing Back Images
“Shooting, Playback, and Erasing” (p. 14)
Step
3
How to Use the Camera
“Three Types of Setting Operations” (p. 3)
Step
4
Printing
“Direct printing (PictBridge)” (p. 32)
“Print Reservations (DPOF)” (p. 35)
Step
5
2
EN
Checking the contents of the box
Step
1
Other accessories not shown: Instruction Manual (this manual), warranty card.
Contents may vary depending on purchase location.
Digital camera
USB cable
microSD
Attachment
Strap
OLYMPUS Master 2
CD-ROM
Two AA batteries
4
EN
Using the FUNC Menu (p. 21)Using the FUNC Menu (p. 21)
Frequently used shooting menu functions can be set with less
steps using the FUNC menu.
Using the Direct ButtonsUsing the Direct Buttons
Frequently used shooting functions can be accessed using the
direct buttons.
Shutter button (p. 14)
K
button (shooting/switching shooting modes)
(p. 17, 18)
q button (playback) (p. 15)
Zoom buttons (p. 19)
F button (exposure compensation) (p. 20)
& button (macro) (p. 20)
# button ( ash) (p. 19)
Y button (self-timer) (p. 21)
"/ button (backlight boost/erase)
(p. 21/p. 16, 28)
B button (p. 21)
Arrow pad
Buttons in use
B button
Arrow pad
B button
Buttons in use
button
1
Press the button.
This example describes how to use the
menus to set the [POWER SAVE].
CAMERA MENU
MENU
EXIT SET
OK
Shooting mode top menu
2
Use klmn to select the desired
menu, and press the B button.
BACKUP
NO
1
2
SETUP
SET
OK
ENGLISH
PIXEL MAPPING
SAVE SETTINGS
MEMORY FORMAT
MENU
EXIT
Submenu 1
●
Please read “Menu Settings” (p. 23 to 31) while referring to this page.
3
Use kl to select the desired
Submenu 1, and press the
B button.
BEEP
OFF
ON
1
2
SETUP
SET
OK
NORMAL
NORMAL
POWER SAVE
MENU COLOR
MENU
EXIT
BEEP
OFF
ON
1
2
SETUP
SET
OK
NORMAL
NORMAL
POWER SAVE
MENU COLOR
MENU
BACK
POWER SAVE
OFF
ON
Page tab Submenu 2
To quickly move to the desired submenu,
press m to highlight the page tab, and then
use kl to move the page. Press n to
return to the submenu.
Some menus include submenus that
appear by pressing the B button.
4
Use kl to select Submenu 2,
and press the B button.
Once a setting is selected, the display
returns to the previous screen.
There may
be additional
operations.
“Menu Settings”
(p. 23 to 31)
BEEP
ON
ON
1
2
SETUP
SET
OK
NORMAL
NORMAL
POWER SAVE
MENU COLOR
MENU
EXIT
5
Press the button to complete
the setting.
●
Three Types of Setting Operations
Using the MenuUsing the Menu
Various camera settings can be accessed through
the menus, including functions used during shooting
and playback and the date/time and screen display.
There may be menus that are unavailable
depending on other related settings or the
mode (p. 17).
3
EN
61
EN
MEMO
4
EN
Using the FUNC Menu (p. 21)Using the FUNC Menu (p. 21)
Frequently used shooting menu functions can be set with less
steps using the FUNC menu.
Using the Direct ButtonsUsing the Direct Buttons
Frequently used shooting functions can be accessed using the
direct buttons.
Shutter button (p. 14)
K
button (shooting/switching shooting modes)
(p. 17, 18)
q button (playback) (p. 15)
Zoom buttons (p. 19)
F button (exposure compensation) (p. 20)
& button (macro) (p. 20)
# button ( ash) (p. 19)
Y button (self-timer) (p. 21)
"/ button (backlight boost/erase)
(p. 21/p. 16, 28)
B button (p. 21)
Arrow pad
Buttons in use
B button
Arrow pad
B button
Buttons in use
button
1
Press the button.
This example describes how to use the
menus to set the [POWER SAVE].
CAMERA MENU
MENU
EXIT SET
OK
Shooting mode top menu
2
Use klmn to select the desired
menu, and press the B button.
BACKUP
NO
1
2
SETUP
SET
OK
ENGLISH
PIXEL MAPPING
SAVE SETTINGS
MEMORY FORMAT
MENU
EXIT
Submenu 1
●
Please read “Menu Settings” (p. 23 to 31) while referring to this page.
3
Use kl to select the desired
Submenu 1, and press the
B button.
BEEP
OFF
ON
1
2
SETUP
SET
OK
NORMAL
NORMAL
POWER SAVE
MENU COLOR
MENU
EXIT
BEEP
OFF
ON
1
2
SETUP
SET
OK
NORMAL
NORMAL
POWER SAVE
MENU COLOR
MENU
BACK
POWER SAVE
OFF
ON
Page tab Submenu 2
To quickly move to the desired submenu,
press m to highlight the page tab, and then
use kl to move the page. Press n to
return to the submenu.
Some menus include submenus that
appear by pressing the B button.
4
Use kl to select Submenu 2,
and press the B button.
Once a setting is selected, the display
returns to the previous screen.
There may
be additional
operations.
“Menu Settings”
(p. 23 to 31)
BEEP
ON
ON
1
2
SETUP
SET
OK
NORMAL
NORMAL
POWER SAVE
MENU COLOR
MENU
EXIT
5
Press the button to complete
the setting.
●
Three Types of Setting Operations
Using the MenuUsing the Menu
Various camera settings can be accessed through
the menus, including functions used during shooting
and playback and the date/time and screen display.
There may be menus that are unavailable
depending on other related settings or the
mode (p. 17).
3
EN
5
EN
1 G SLIDESHOW .............. p. 27
2 I EDIT
Q (Resize) ............... p. 27
P (Crop) ................... p. 27
Menus for Playback, Editing, and Printing Functions
In playback mode, settings can be adjusted.
MENU
EXIT SET
OK
PLAYBACK MENU
1
2
3
4
5
6
7
Playback mode top menu
3 J PLAYBACK MENU
0 (Protect) .............. p. 27
y (Rotate).................. p. 27
4 K ERASE ....................... p. 28
5 L PRINT ORDER ........... p. 35
6 E SETUP
*
*
Same as “Menus for
Shooting Functions”
7 F SILENT MODE ........... p. 31
1 A IMAGE QUALITY ........ p. 23
2 B CAMERA MENU
WB .............................. p. 24
ISO ............................. p. 24
PANORAMA ............... p. 25
FACE DETECT ........... p. 25
3 C SWITCH SHOOTING
MODES
P ................................ p. 14
G ............................ p. 17
DIS MODE .................. p. 18
s ........................... p. 17
MOVIE ........................ p. 18
4 D RESET ........................ p. 26
5 E SETUP
MEMORY FORMAT/
FORMAT ................. p. 29
BACKUP ..................... p. 29
W (Language) ....... p. 29
PIXEL MAPPING ........ p. 29
SAVE SETTINGS ....... p. 30
MENU COLOR ........... p. 30
BEEP .......................... p. 30
s (Monitor) .............. p. 30
X (Date/time) ........... p. 30
POWER SAVE ............ p. 31
6 F SILENT MODE ........... p. 31
Menu Index
Menus for Shooting Functions
In shooting mode, settings can be adjusted.
MENU
EXIT SET
OK
CAMERA MENU
4
1
2
3
5
6
Shooting mode top menu
6
EN
Names of Parts
1 Strap eyelet .................................p. 10
2 Battery/card
compartment cover .....................p. 10
3 Flash ...........................................p. 19
Camera unit
6
7
1
3 4 5
2
4 Lens ......................................p. 43, 55
5 Self-timer lamp ............................p. 21
6 USB connector ......................p. 32, 37
7 Tripod socket
7
EN
3
2
4
5
7
6
10
11
9
8
1
1 n button ............................p. 12
2 Card access lamp .......................p. 44
3 Monitor ..................................p. 14, 39
4 m button ................................. p. 3
5 /D button (backlight boost/erase)
................................p. 21/p. 16, 28
6 Shutter button .............................p. 14
7 Zoom buttons ..............................p. 19
8
K
button (shooting/
switching shooting modes) ... p. 17, 18
9 q button (playback) .................. p. 15
10 B button (OK/FUNC) ..............p. 3, 21
11 Arrow pad ............................... p. 3, 12
F button (exposure compensation)
..........................................p. 20
& button (macro) ................... p. 20
Y button (self-timer) .............. p. 21
# button (fl ash) ...................... p. 19
8
EN
Monitor
Shooting mode display
+2.0 1/30 F3.1
P
4
IN
ISO
400
N
ORM
1
6
7
9111213 810
17
16
15
14
2 4 53
+2.0
IN
00:34
QVGA
15
1
7
9 81013
17
15
14
2 4 53
10M10M
Still image Movie
1 Shooting mode ............................ p. 14
2 Flash mode .................................p. 19
3 Silent mode .................................p. 31
4 Macro/super macro .....................p. 20
5 Battery check ..............................p. 10
6 Flash standby/camera shake
warning/fl ash charge .............p. 19, 39
7 AF target mark ............................p. 14
8 Number of storable still pictures/
remaining recording time ...p. 14/p. 18
9 Current memory ..........................p. 44
10 Self-timer ....................................p. 21
11 Aperture value ............................ p. 14
12 Shutter speed ............................. p. 14
13 Exposure compensation .............p. 20
14 Compression/frame rate .............p. 23
15 Image size .................................. p. 23
16 ISO .............................................. p. 24
17 White balance .............................p. 24
9
EN
Playback mode display
10
M
2009.08.262009.08.26 12:30 4
+2.0
F3.1
10
IN
x
100-0004
N
ORM
1/1000
ISO 4
00
2
8
9
7
5
6
10
3
41
14
15
111213
2009.08.262009.08.26 12:30
100-0004
00:14
/
00:34
IN
QVGA
15
9
14
7
8
10
3
41
1112
Still image Movie
1 Silent mode .................................p. 31
2 Print reservations/
number of prints .................p. 35/p. 34
3 Protect ........................................p. 27
4 Battery check ..............................p. 10
5 Aperture value ............................ p. 14
6 Exposure compensation .............p. 20
7 White balance .............................p. 24
8 Image size .................................. p. 23
9 File number ....................................... -
10 Frame number/
Elapsed time/total recording time
..............................................p. 15, 16
11 Current memory .......................... p. 44
12 Compression/frame rate .............p. 23
13 ISO .............................................. p. 24
14 Date and time ............................. p. 12
15 Shutter speed ............................. p. 14
10
EN
Preparing the Camera
2
For the types of batteries that can be used,
see “Battery handling precautions” (p. 43).
If using rechargeable batteries, charge the
batteries.
Turn off the camera before opening the
battery/card compartment cover.
When to replace the batteries
Replace the batteries when the error
message shown below appears.
BATTERY EMPTY
Monitor top right Error message
Flashes in red
Attaching the camera strap
Pull the strap tight so that it does not come
loose.
Loading the batteries and
the xD-Picture Card™ (sold
separately) into the camera
Do not insert anything other than an
xD-Picture Card or the microSD Attachment
into the camera.
1
2
1
Battery/card
compartment
cover
11
EN
Using the microSD card/
microSDHC card (sold
separately)
A microSD card or microSDHC card (hereafter
both will be referred to as microSD card) is also
compatible with this camera using the microSD
Attachment.
“Using the microSD Attachment” (p. 46)
1
Insert the microSD card into the
microSD Attachment.
Insert the card
entirely into the
attachment.
2
Insert the microSD Attachment into
the camera.
Notch
To remove the microSD card
Pull the microSD card straight out.
Do not touch the contact area of the
microSD Attachment and/or microSD card.
3
Notch
Index area
Insert the card straight until it clicks into
place.
Do not touch the contact area directly.
1
2
4
This camera allows the user to take pictures
using the internal memory even when
no xD-Picture Card (sold separately) is
inserted. “Using an xD-Picture Card” (p. 44)
“Number of storable pictures (still pictures)/
Continuous recording length (movies) in
the internal memory and xD-Picture Card”
(p. 45)
To remove the xD-Picture Card
12
Press the card in until it clicks and comes
out slightly, then grab the card and pull it out.
12
EN
Arrow pad and operation guide
The symbols 1243, displayed
on various setting and movie playback screens
indicate that the arrow pad be used.
2009.08.26 12:30
100-0004
00:14
/
00:34
IN
/
2008 08 26 12 30
OK
X
YMD
TIME
MENU
CANCEL SET
Y M D
0.0 +0.3
+0.7 +1.0
EXPOSURE COMP.
Arrow pad
4
2
1
3
Operation guides displayed at the bottom of the
screen indicate that the m button, B button,
zoom buttons, or D button be used.
1
4
2
5
3
6
IN
OK
MENU
BACK GO
SEL. IMAGE
T
W
SET
OK
D
MENU
EXIT SET
OK
CAMERA MENU
Operation guide
Setting the date and time
The date and time set here are saved to image
fi le names, date prints, and other data.
1
Press the n button to turn on
the camera.
The date and time setting screen is displayed
when the date and time are not set.
X
YM
YMD
DTIME
---- -- -- -- --
MENU
CANCEL
Date and time setting screen
2
Use kl to select the year for
[Y].
2009
-- -- -- --
X
YM
YMD
D TIME
MENU
CANCEL
3
Press n to save the setting for [Y].
2009 08
-- -- --
X
YM
YMD
D TIME
MENU
CANCEL
4
As in Steps 2 and 3, use klmn
and the B button to set [M] (month),
[D] (day), [TIME] (hours and
minutes), and [Y/M/D] (date order).
For a more accurate setting, press the
B button when the time signal hits
00 seconds.
To change the date and time, adjust the
setting from the menu. [X] (Date/time)
(p. 30)
●
13
EN
Changing the display language
The language for the menu and error messages
displayed on the monitor is adjustable.
1
Press the m button, and press
klmn to select [E] (SETUP).
MENU
EXIT SET
OK
SETUP
2
Press the B button.
1
2
BACKUP
NO
SAVE SETTINGS
SETUP
ENGLISH
PIXEL MAPPING
MEMORY FORMAT
MENU
EXIT SET
OK
3
Use kl to select [W] and
press the B button.
ENGLISH
FRANCAIS
DEUTSCH
ESPAÑOL
ITALIANO
MENU
BACK SET
OK
4
Use klmn to select your
language and press the B button.
5
Press the m button.
14
EN
Shooting, Playback, and Erasing
2
Hold the camera and compose the
shot.
1/400 F3.5
AUTO
Horizontal grip
Vertical grip
Monitor
3
Press the shutter button halfway
down to focus on the subject.
When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
The camera was unable to focus if the AF target
mark fl ashes red. Try focusing again.
1/400 F3.1
P
AF target mark
Press halfway
Shutter speed
Aperture value
“Focusing” (p. 41)
●
●
Shooting with the optimum
aperture value and shutter
speed ( P mode)
In this mode, automatic shooting settings are
activated while also allowing changes to a
wide range of shooting menu functions such as
exposure compensation, white balance, etc. as
needed.
1
Press the n button to turn on
the camera.
10
M
4
IN
N
ORM
P
Monitor
(standby mode screen)
Number of storable still pictures (p. 45)
P mode indicator
If P mode is not displayed, press the K
button several times to select it.
Current shooting mode display
Press the n button again to turn off
the camera.
15
EN
4
To take the picture, gently press
the shutter button all the way down
while being careful not to shake the
camera.
1/400 F3.1
P
Image review screen
Press fully
To view images during shooting
Pressing the q button enables playback of
images. To return to shooting, either press
the
K
button or press the shutter button
halfway down.
To shoot movies
“Shooting movies (A mode)” (p. 18)
Viewing images
1
Press the q button.
1
IN
10
M
2009.08.26 12:30
100-0001
N
ORM
0.0
F3.1
1/400
ISO 4
00
Playback image
Number of frames
2
Use klmn to select an image.
Displays
10 frames before
the current image
Displays next
image
Displays previous
image
Displays
10 frames after
the current
image
The display size of the images can be
changed. “Index view and close-up view”
(p. 22)
To play back movies
Select a movie, and press the B button.
2009.08.26 12:30
100-0004
4
IN
MOVIE PLAY
OK
QVGA
15
Movie
16
EN
Operations during movie playback
Fast-forward: Press and hold down n.
Rewind: Press and hold down m.
Pause: Press the B button.
2009.08.26 12:30
100-0004
00:12
/
00:34
IN
QVGA
15
QVGA
15
During playback
Elapsed time/
Total recording time
First (last) frame/frame advance:
During pause, press k to display the fi rst
frame, and press l to display the last
frame.
Press and hold down n to play a movie, and
press and hold down m to play a movie in
reverse.
Press the B button to resume playback.
2009.08.26 12:30
100-0004
00:14
/
00:34
IN
/
QVGA
15
QVGA
15
During pause
To stop movie playback
Press the m button.
Erasing images during
playback ( Single image erase)
1
Press the D button when the image
to be erased is displayed.
ERASE
ERASE
OK
IN
NO
NO
YES
SET
CANCEL
MENU
2
Press k to select [YES], and
press the B button.
[K ERASE] (p. 28)
17
EN
Submenu 1 Application
B PORTRAIT/F LANDSCAPE/
G NIGHT SCENE
*1
/
M NIGHT+PORTRAIT/
C SPORT/N INDOOR/
W CANDLE
*1
/
R SELF PORTRAIT/
S SUNSET
*1
/X FIREWORKS
*1
/
V CUISINE/d DOCUMENTS
The camera takes
a picture using the
optimum settings
for the scene
conditions.
*1
When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time during which no other pictures can
be taken.
Shooting with automatic
settings (
G
mode)
According to the scene, the camera
automatically selects the ideal shooting
mode from [PORTRAIT]/[LANDSCAPE]/
[NIGHT+PORTRAIT]/[SPORT]/[MACRO]. This
is a fully automatic mode that allows the user
to take pictures using the best mode for the
shooting scene simply by pressing the shutter
button. The shooting menu options cannot be
specifi ed in
G
mode.
1
Press the
K
button a few times to
set
G
.
The icon changes depending
on the scene that the camera
automatically selects.
10
M
4
IN
N
ORM
i
AUTO
In some cases, the camera may not select
the desired shooting mode.
When the camera cannot identify which is
the optimal mode, P mode will be selected.
The shooting mode changes in the order
of P,
G
,
h
,
s
,
A
each time the
K
button is pressed. By switching to any
of other shooting modes, most settings in
h
and
s
mode will be changed to the
default setting of the respective shooting
mode.
Using the best mode for the
shooting scene (
s
mode)
1
Press the
K
button a few times to
set
s
.
PORTRAIT
SET
OK
MENU
EXIT
2
Use kl to select the best
shooting mode for the scene, and
press the B button.
10
M
4
IN
N
ORM
Icon indicating
the scene mode
that is set
In
s
modes, the optimum shooting
settings are pre-programmed for specifi c
shooting scenes. For this reason, settings
may not be changed in some modes.
Using Shooting Modes
18
EN
Using the digital image
stabilization mode (h mode)
This mode enables the user to reduce blur
that is caused by camera shake and subject
movement.
1
Press the
K
button a few times to
set h.
h mode indicator
4
IN
N
ORM
10
M
By switching to any of other shooting
modes, most function settings in h mode
will change to the default settings of the
newly selected mode.
Shooting movies (n mode)
1
Press the
K
button a few times to
set n.
A mode indicator
00:34
IN
QVGA
15
2
Press the shutter button halfway
down to focus on the subject, and
gently press the button all the way
down to start recording.
Press halfway
Press fully
00:34
00:34
REC
REC
Lights up red when recording
Remaining recording time (p. 45)
3
Gently press the shutter button all
the way down to stop recording.
19
EN
Using the fl ash
The fl ash functions can be selected to best
match the shooting conditions.
1
Press the # button.
P
OK
OK
AUTO
SET
SET
FLASH AUTO
FLASH AUTO
AUTO
! # $
2
Use mn to select the setting option,
and press the B button to set.
Option Description
FLASH AUTO
The fl ash fi res automatically in
low-light or backlight conditions.
REDEYE
Pre-fl ashes are emitted to reduce
the occurrence of red eye in your
photos.
FILL IN
The fl ash fi res regardless of the
available light.
FLASH OFF The fl ash does not fi re.
Using the zoom
Pressing the zoom buttons adjusts the shooting
range.
Pressing the wide
(W) button
Pressing the telephoto
(T) button
10
M
P
4
IN
N
ORM
10
M
P
4
IN
N
ORM
Zoom bar
Optical zoom: 3x, digital zoom: 4x
Use of h mode (p. 18) is recommended
when shooting with the telephoto zoom.
The zoom bar appearance identifi es the
status of the digital zoom.
Digital zoom
range
When using
optical zoom and
digital zoom
Optical zoom
range
Using Shooting Functions
20
EN
Adjusting the brightness
( Exposure compensation)
The standard brightness (appropriate exposure)
set by the camera based on the shooting mode
(except for
G
) can be adjusted brighter or
darker to obtain a desired shot.
1
Press the F button.
0.0
0.0
+0.3
+0.3
+0.7
+0.7
+1.0
+1.0
EXPOSURE COMP.
Exposure compensation value
2
Use klmn to select the desired
brightness, and press the B button.
Shooting closeups
( Macro shooting)
This function enables the camera to focus and
shoot subjects at close distances.
1
Press the & button.
P
OK
OK
SET
SET
OFF
OFF
OFF
% &
OFF
2
Use mn to select the setting option,
and press the B button to set.
Option Description
OFF Macro mode is deactivated.
MACRO
This enables shooting as close as
10 cm/3.9 in.
*1
(60 cm/23.6 in.
*2
) to
the subject.
SUPER MACRO
*3
This enables shooting as close as
5 cm/2.0 in. to the subject.
*1
When the zoom is at the widest (W) position.
*2
When the zoom is at the most telephoto (T) position.
*3
The zoom is automatically fi xed.
The fl ash (p. 19) and zoom (p. 19) cannot
be set during super macro shooting.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

Olympus FE-25 User manual

Olympus
Brand
Olympus
Model
FE-25
Category
Bridge cameras
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents