AUTO-DIMMING
COMPASS MIRROR
OPERATING INSTRUCTIONS
Auto-Dimming:
1. Look for a green LED light in the small aperture at the
left side of the display window.
2. If the green LED is not on, depress the switch on the
left side of the display window.
3. The auto-dimming feature is now on. The mirror will
automatically dim to the appropriate level when glare
from following vehicles’ headlights is present at night.
Compass Display Options:
1. Look for display in lower center of mirror.
2. If display is not on, depress the switch on the right
side of the display window. The switch will toggle the
display between the compass direction and no
display.
over
Place this pamphlet in the
glove box for future reference.
Congratulations!
This vehicle is equipped with a state-of-the-art
GLAREFREE
TM
Compass Mirror.
The GLAREFREE
TM
Mirror automatically dims to
reduce glare coming from headlamps in following
vehicles - while providing maximum visibility and
comfort to the driver.
Form 08V03-S9V-1000-81 210066 B
Compass Zone Adjustment:
1. The zone setting is factory preset to Zone 8. Refer to
the Compass Calibration Zone map to verify the
correct compass zone setting for your geographical
location.
2. Push and hold the switch on the right side of the
display window until the word ZONE appears in the
display.
3. Press the switch repeatedly until the correct compass
zone setting for your geographical location is
displayed.
4. The display will change back to the compass
direction after 3 seconds if the switch is not activated.
Compass Calibration Adjustment:
The compass function calibrates itself under normal
driving and turning conditions. However, circumstances
occasionally arise which may cause the compass to
display inaccurately. To reset the compass, follow these
instructions:
1. Drive to an open, level area away from large metallic
objects or structures.
2. Push and hold the button on the left side of the
display window until the CAL icon appears in the
display. Release the switch to enter the calibration
mode.
3. Drive slowly in
two to three
circles until the
CAL icon
disappears
from the
display.
4. The compass
calibration
procedure is
now complete.
U.S. Patent No. 5255442, 5644851, 5632092,
5073012, 506612, 5668663, 5724187
Compass
Calibration
Zones
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Subaru 2015 Forester User guide
-
Subaru 2015 Impreza User guide
-
Subaru XV Crosstrek Owner's manual
-
Mazda 4112A-NZLCTHL3 User manual
-
Saab 9-7X Owner's manual
-
Buick Rainier 2006 Owner's manual
-
Dakota Digital MMR-1 Technical Manual
-
GMC 2006 Yukon XL Owner's manual
-
Chevrolet 2006 TrailBlazer Owner's manual
-