Whirlpool W9 931D KS Daily Reference Guide

Brand: Whirlpool

Model: W9 931D KS

Type: Daily Reference Guide

This manual is also suitable for

W9 931D B H

Whirlpool W9 931D KS is a versatile and feature-rich refrigerator that offers a range of convenient functions to keep your food fresh and organized. With its Fast Cool and Fast Freeze options, you can quickly chill or freeze large quantities of food, while the Precision Control function minimizes temperature fluctuations in the freezer, preserving the quality of your frozen goods. The Vacation mode helps save energy during prolonged absences, and the Smart Display reduces power consumption by switching off the external display when not in use.

Quick guide

* Available only on certain models

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

FIRST TIME USE

After installation, wait at least two hours before connecting the

appliance to the power supply. Once connected, it will start working

automatically. The ideal temperature settings are preset from the

factory.

After turning the appliance on, wait 4-6 hours for it to reach the correct

food storage temperature.

CONTROL PANEL

1. Black out alarm indicator

2. Fast cool indicator

3. Fridge and freezer temperature display

4. Fast freeze indicator

5. Vacation mode indicator

6. On/Stand By button

7. Stop alarm button

8. Fridge temperature button / fast cool button

9. Freezer temperature button / fast freeze button

10. Precision control button / vacation mode button

ON/STAND-BY

To put the product in Stand-by, press and hold the On/ Stand By

button for 3 seconds. All the indicators turn o except On/Standby

indicator. Press again to reactivate the appliance.

FRIDGE TEMPERATURE

To adjust the Fridge Temperature, press the Fridge Temperature

button. The Fridge Temperature can be adjusted between +2°C and +

8°C, as shown by the Fridge and freezer temperature display.

FREEZER TEMPERATURE

To adjust the Freezer Temperature, press the Freezer °C button. The

Freezer Temperature can be adjusted between -16°C and -24°C, as

shown by the FRIDGE TEMPERATURE button/Fast Cool button.

Recommended setting:

• Refrigerator compartment: +4°C or MED

• Freezer compartment: -18°C or -20°C

Note: Displayed set points correspond to the average temperature

throughout the whole refrigerator.

FAST COOL

Using Fast Cool function it is possible to increase the cooling

capacity in the refrigerator compartment. The use of this function

is recommended when placing a very high quantity of food in the

refrigerator compartment. Press the FRIDGE TEMPERATURE button/

Fast Cool button to activate Fast Cool function. When activated, the

Fast Cool indicator turns on. The function is automatically disabled

after 6 hours, or can be manually disabled by pressing FRIDGE

TEMPERATURE button/Fast Cool button again.

FAST FREEZE

The use of this function is recommended when placing a very high

quantity of food to be frozen in the freezer compartment.

24 hours before freezing fresh food, press the FREEZER TEMPERATURE

button / Fast Freeze button to activate the Fast Freeze function. When

activated, the Fast Freeze indicator turns on. After 24 hours place the

food to be frozen in the middle freezing zone of freezer compartment.

The function is automatically disabled after 48 hours, or can be

manually disabled by pressing FREEZER TEMPERATURE button / Fast

Freeze button.

PRECISION CONTROL FUNCTION

Precision control function is an advanced technology that reduces

temperature uctuations in the whole freezer compartment to

minimum, thanks to an innovative air system, totally independent from

the fridge. Freeze burns are reduced up to 60% and food preserves its

original quality and color. To activate/deactivate the precision control

function simply press the precision control function button. The

function works properly in a dened range of temperature: between

-22°C and - 24°C.

When the function is engaged and the current temperature in the

freezer is set to the warmer set point than -22°C, the temperature is

automatically set to -22°C to match the working range. If the function

is engaged and the user modify the freezer temperature out of the

working range, the function is automatically switched o. In case of

Fast freezing is engaged, the function “Precision control function” is

inhibited until the Fast Freezing function switched o.

VACATION MODE

This function can be activated to reduce the energy consumption

of the appliance during a prolonged period of time. To activate the

Vacation, press for 3 seconds the Precision Control button. When the

function is enabled, the related symbol will light up and the fridge

display will show 12°C. To deactivate this function repeat the same

procedure. Changing the refrigerator temperature setpoint will

automatically deactivate the function. When this function is engaged,

the freezer compartment works normally.

SMART DISPLAY *

This optional function can be used to save energy. To activate the

Smart Display, press simultaneously FRIDGE temperature button and

FREEZER temperature button. When activated, other buttons and the

displays are switched o to minimize the consumption. To deactivate

this function repeat the same procedure. Remember that this function

does not disconnect the appliance from the power supply, but only

reduce the power consumed by external display Every time you want

to use the control panel and see all the functions, you just need to

touch any button to wake up the panel.

LED LIGHT

This product contains a light source of energy eciency class G.

If the LED light system does not work, please contact the Service to

replace it.

Important: The refrigerator compartment light switches on when the

refrigerator door is opened. If the door is kept open for more than

8 minutes the light will be automatically switched o.

HOW TO STORE FRESH FOOD AND BEVERAGES

Legend

TEMPERATE ZONE

Suggested for storage of tropical fruit, cans, drinks,

eggs, sauces, pickles, butter, jam

COOL ZONE

Suggested for the storage of cheese, milk, daily food,

delicatessen, yogurt

COOLEST AREA

Suggested for storage of meat and sh

FRUIT & VEGETABLE DRAWER

FREEZER DRAWERS

(One drawer in models lower than 1,7m)

FREEZING ZONE DRAWER

(Max cool zone)

Suggested to freeze fresh / cooked food

REFRIGERATION COMPARTMENT

Refrigerator compartment defrosting is completely automatic.

Droplets of water on the rear wall inside the refrigerator compartment

indicate that the automatic defrost phase is in progress.

The defrost water is automatically run into a drain hole and collected in

a container, where it evaporates.

Fan*

The Fan improves temperature distribution inside the refrigerator

compartment, allowing better preservation of stored food.

The fan will start/stop working depending on the temperature and/

or humidity level inside the fridge. If the appliance has the Fan it can

be equipped with the antibacterial lter. If the appliance has the Fan it

can be equipped with the antibacterial lter. Visit the website page or

contact consumer service to purchase the lter.

Fresh box 0°

The Fresh Box 0° compartment is ideal to store meat and sh. By

decreasing/increasing the fridge temperature, you impact the Fresh

Zone 0° compartment temperature as well. Keep in mind that the Fresh

Zone 0° compartment is a mechanical feature operating all the time

and it cannot be switched o.

If the declaration for the "chiller/chill" drawer is on the rating plate, the

declaration applies only to standard EN 62552:2013, valid until February

28th, 2021.

FREEZER COMPARTMENT

No Frost freezers provide chilled air circulation around the storage

areas, and prevent the formation of ice, thereby completely eliminating

the need for defrosting.

Frozen items don’t stick to the walls, labeling stays legible and storage

space remains neat and clear.

The freezer compartment allows for the storage of frozen food and the

freezing of fresh food. The quantity of fresh food that can be frozen

in a specic time period is indicated on the rating plate. Arrange the

fresh food in the freezing area inside the freezer compartment, leaving

enough space around it to allow air to circulate freely. Avoid allowing

fresh food to come into direct contact with frozen food.

Load limits are determined by baskets, aps, drawers, shelves etc..

Make sure that these components can still close easily after loading.

The freezing zone's drawer/compartment is shown in the picture

above. To optimize freezing speed and get more storage space, the

freezer compartment can be used without the freezer drawers and

the food can be placed directly on the bottom of the compartment.

To avoid food waste, please refer to the recommended setting and

storage found in the online user manual.

Ice cubes

Fill 2/3 of the ice tray with water and place it back in the freezer

compartment. Do not use sharp or pointed objects to remove the ice.

* Available only on certain models

ACCESSORIES*

EGG TRAY BOTTLE RACK TUCK SHELF

FRESH PAD FAST FREEZE PAD ICE TRAY

Sense

This function automatically works to ensure the optimal

conditions to preserve the stored food. The “6th Sense”function

is automatically activated when:

• a large amount of food is loaded into the refrigerator

• the refrigerator door is left open for a long time

• a prolonged power failure takes place, causing the internal

temperature of the appliance to increase to values that cannot

guarantee safe storage of food.

Tuck shelf *

Thanks to the rail system, this shelf allows you to slide under the front

part, creating an extra space for storing tall bottles or pitchers.

Easy access tray in freezer *

Freezer tray is useful to easily access frequently used products, freeze

or simply store leftovers or small items.

Humidity control *

Open the humidity regulator (position B) if you want to store food in a

less humid environment like fruit, or close it (position A) to store food in

a more humid environment like vegetable.

GENERAL INFORMATION

The drawers, baskets, and shelves should be kept in their current

position unless otherwise specied in this quick guide.

The light system inside the refrigerator compartment uses LED lights,

which provide better lighting and use less energy than traditional

bulbs.

Doors and lids of the refrigerator should be removed before disposal,

to avoid children or animals getting trapped inside.

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The appliance is not

working.

There may be an appliance power

supply problem.

• Check if power cable plugged into a live socket with the proper

voltage.

• Check if the protection devices and fuses of the electrical system

in your home

There is water in the defrost

pan.

This is normal in hot, damp weather. The

pan can even be half full.

• Make sure the appliance is level so that the water does not

overow.

The edges of the appliance

cabinet, which come in

contact with the door seal,

are warm to the touch.

This is not a defect. This is normal in hot

weather and when the compressor is

running.

The light does not work. The light may need replacing.

The appliance may be in On/ Stand-by

model.

• Make sure if the protection devices and fuses of the electrical

system in your home work well.

• Check if the power cable is plugged into a live socket with the

proper voltage

• In case the LEDs are broken the user must call the Service for

exchange of the same type available only at our Aftersales Service

Centers or authorized dealers.

The motor seems to run too

much.

Motor running time depends on

dierent things: number of door

openings, amount of food stored,

temperature of the room, setting of the

temperature controls.

• Make sure that the appliance controls are correctly set.

• Check if there is not a large amount of food been added to the

appliance.

• Check that the door is not opened too often.

• Check that the door close properly.

* Available only on certain models

400011500842

Policies, standard documentation and additional product information can be found by:

• Visiting our website docs . whirlpool . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication plate.

The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes

the model identier that can be used to consult the https://eprel.ec.europa.eu database portal.

What to do if... Possible reasons Solutions

The appliance temperature

is too high.

There could be various causes (see

“Solutions”).

• Make sure that the condenser (back the appliance) is free of dust

and u.

• Make sure that the door properly closed.

• Make sure that the door seals properly tted.

• On hot days or if the room is warm, the motor naturally runs

longer.

• If the appliance door has been left open for a while or if large

amounts of food have been stored, the motor will run longer in

order to cool down the interior of the appliance.

The doors do not open and

close properly.

There could be various causes (see

“Solutions”).

• Check that food packages are not blocking the door.

• Check that the internal parts or automatic ice maker are not out of

position.

• Check that the door seals are not dirty or sticky.

• Ensure the appliance is level.

ALARM TABLE

Alarm type Signal Cause Cure

Door open alarm Door open alarm indicator

remains on, the acoustical

alarm is activated and the Alarm

Indicator blinks.

The Fridge or Freezer door has

remained open for more than 2

minutes.

Close the door or press the Stop

Alarm to mute the acoustical

alarm.

Temperature alarm

The Temperature display blinks

(°C) and the Alarm Indicator

remains on.

Inside the Freezer the

temperature is not adequate

Press the Stop Alarm button ;

the acoustical alarm stops, the

Temperature Display (°C) blinks

and the Alarm Indicator remains

on until a temperature < -10°C is

reached.

Long black-out alarm

The Black Out Alarm icon remains

on, the Alarm indicator blinks.

Prolonged power failure, able to

cause the inside temperature to

increase to 0°C.

Press the Stop Alarm button ; the

acoustical alarm stops.

Malfunction

The letter “F” blinks on the

display (°C).

Product malfunction. Contact the After-sales Service.

* Available only on certain models

Whirlpool W9 931D KS Daily Reference Guide

Brand: Whirlpool

Model: W9 931D KS

Type: Daily Reference Guide

This manual is also suitable for

W9 931D B H

Download PDF

report

Whirlpool W9 931D KS Daily Reference Guide

This manual is also suitable for

Whirlpool W9 931D KS Daily Reference Guide

Related papers

Other documents