Aritech FP2000 Installation guide

FP2000 RAM EXPANSION KIT : INSTALLATION INSTRUCTIONS Revision 0

22/01/98 Document No: 980122/416/M Page 1 of 2

INSTALLATION INSTRUCTIONS

FP2000 RAM EXPANSION KIT

RE2004 / RE2004/EU / RE2004/A / RE2004/S

PRODUCT DESCRIPTION

The FP2000 RAM Expansion Kit enables the memory capacity of the FP2000 series fire panels to be

increased form 1Mb to 4 Mb

INSTALLATION

• Upload panel configuration from FP2000 to PC

• Disconnect all power (mains and batteries)

• Remove battery backup by setting J5 to “off” position

• Insert 512K*8 (4 Mb) RAM IC into position IC4 on Host CPU Board - CE-FP-319-X

• Insert EPROM with software upgrade into position IC1

• Set jumpers

• Restore battery backup by setting J5 to “on” position

• Restore power

• Download panel configuration from PC to FP2000

J5: Battery

backup

J7,8,9&10

A B

IC4:

Insert

RAM h

IC1: Insert

EPROM here

FP2000 RAM EXPANSION KIT : INSTALLATION INSTRUCTIONS Revision 0 22/01/98

Document No: 980122/416/M Page 2 of 2

JUMPER SETTINGS

JUMPER POSITION

RAM Size: 128Kx8 RAM Size: 512Kx8

J7 B A

J8 A B

J9 A A

J10 B A

CAUTION

This kit contains electrostatic sensitive components. Ensure that the neccessary precautions are taken to

avoid damage to these components.