Light Bulb Setup (If Applicable)
Before beginning installation of your ALVI SMART Device please remember to:
Remove your current furnace filter from the housing.
Switch your furnace/central HVAC system to off.
!
!
Turn off light switch before removing light bulb.
!
Fig. 4 Fig. 5 Fig. 6
4. Slide your ALVI SMART Device half way into your furnace filter housing (see fig. 7) and connect the
ALVI adapter end to your ALVI SMART Unit.
5. Slide ALVI all the way into your furnace filter housing, ALVI Unit LED should be solid Purple (see fig. 8).
1. Remove light bulb from socket (see fig 4.).
2. Insert ALVI Light Bulb Adapter into socket and turn till tight (see fig. 5).
3. Connect ALVI Power Adapter into outlet on ALVI Light Bulb Adapter (see fig. 6).
Note: Moving forward, use the string attached to the Light Bulb Adaptor to turn the light on and off (leave light switch on at all times),
or power to ALVI will turn off.
Furnace
Furnace
Furnace
Furnace
ALVI UNIT
LED
Fig. 7 Fig. 8
Light Bulb
Adapter
Page 2
CAUTION: PLEASE AVOID TOUCHING ALVI’S METAL CAGE WHEN
PLUGGED IN, TO PREVENT MILD SHOCK
!
!
Wait till bulb is cool to remove.
!