KitchenAid KOMS 6910/I Program Chart

Brand: KitchenAid

Model: KOMS 6910/I

Category: Ovens

Type: Program Chart

The KitchenAid KOMS 6910/I offers a range of functions for versatile cooking. With its top heating function, you can brown the top surface of dishes like fruitcakes or cheesecakes. The static function is suitable for cooking food on a single level, while the grill function with variable temperature settings is ideal for grilling small pieces of meat or making toast. For finishing off dishes or thickening sauces, the bottom heating function is a great choice. Additionally, the fan function allows you to cook different foods simultaneously on multiple levels without preheating the oven.

Product sheet

Product sheet 4

Control panel 4

Functions of the electronic programming unit 4

Oven functions 6

Using the oven 7

1. Control panel

2. Oven door

3. Oven handle

Accessories

• 2 wire shelves

•1 drip tray

• 1 turnspit

Knobs

• Turn the knobs to the desired position.

• Once cooking is over, turn the knobs back to 0 or

•

Product sheet

1. Oven function control knob

2. Electronic programmer

3. Thermostat knob

4. Green ON indicator light

5. Orange thermostat indicator light

Control panel

NOTE: To ensure correct operation, the electronic

programming unit must be earthed.

Legend of the symbols on the display:

A (1)= Automatic program in operation

(2) = If displayed, oven operation is enabled. If off, the oven

is not connected to the electric power supply and cannot

operate.

•

(3) = If flashing, it indicates that the programming unit is

waiting for the user to enter the necessary parameters.

(4) = If on, it indicates that a timer alarm is on.

– (5) = key used to decrease the time setting

parameters/timer parameters. (It is used to select the

desired level among the 3 available timer alarm levels).

M (6) = “Mode” key to access the programming unit

programming options.

+ (7) = key used to increase the time setting

parameters/timer parameters.

Functions of the electronic programming unit

Switching the appliance on for the first time

When the oven is connected to the electric

network, or after a power cut, the digits on the

display and the letter A will flash. In this condition,

the oven cannot be operated.

To set the current time and/or enable the

operation of the oven press and hold the M key for

2 minutes. The letter A goes off and the digits on

the display stop flashing.

While the dot (3) is flashing, press the – or + keys

to update the time displayed. The set value is

accepted by the programming unit shortly after the

key is released. If the time is not updated

immediately, refer to the section “updating the

current time and changing the volume of the timer

alarm”, to reset the programming unit and set the

dot to flashing mode.

NOTE: The oven can perform cooking

operations only when the programming unit

displays the symbol .

Timer alarm

The timer function is simply an acoustic warning.

This can be adjusted for a maximum period of 23

hours and 59 minutes.

After this time, the symbol will go off and an

acoustic signal will come on. This can be

deactivated pressing any key. Otherwise, it will

automatically go off after 7 minutes. To adjust the

timer press the M key for 2 seconds or until the

symbol starts flashing. Use the + or – keys to

increase or decrease the displayed parameters, that

set in how many hours and/or minutes the timer

alarm must come on. Once the desired time is

displayed release the + or – key.

After a few seconds the current time and the

symbol will be displayed. Countdown will start

immediately.

Semi-automatic cooking

Cooking DURATION:

After selecting one of the available cooking

functions and setting the desired temperature,

press the M key for at least 2 seconds to access

the programming mode. The symbol comes on.

Release and press the M key again. The A symbol

starts flashing and “dur” appears on the display.

“dur” will then be replaced by: 0? 00.

Set the desired cooking time by pressing the – or

+ keys. (the maximum time that can be set is 10

hours). The set time will be processed

automatically by the automatic programming unit

after a few seconds. Otherwise keep pressing and

releasing the M key until the current time is

displayed. The A symbol will be on.

The end of cooking time will be notified by an

acoustic signal, after which the oven will

automatically switch off. See following sections:

disabling the timer alarm and enabling the

oven. At the end of each cooking operation return

the knobs to the 0 position.

END of Cooking:

After selecting one of the available cooking

functions and setting the desired temperature,

press the M key for at least 2 seconds to access

the programming mode. The symbol comes on.

Release and press the M key again. The A symbol

starts flashing and “dur” appears on the display.

Press the M key again. The display will show

“End”. “End” will then be replaced by: 0? 00. Use

the – or + keys to set the desired end of cooking

time. (the maximum time that can be set is 10

hours) The set time will be processed automatically

by the automatic programming unit after a few

seconds. Otherwise keep pressing and releasing

the M key until the current time is displayed.

Cooking will start immediately. After a few seconds

the programming unit display will revert to

displaying the current time. The A symbol will be

on.

The end of cooking time will be notified by an

acoustic signal, after which the oven will

automatically switch off. See following sections:

disabling the timer alarm and enabling the

oven. At the end of each cooking operation return

the knobs to the 0 position.

Automatic cooking

Set the cooking DURATION time following the

instructions in the chapter Cooking DURATION.

Set the end of cooking time following the

instructions on the previous chapter. (The

maximum time that can be set is 24 hours).

The oven will automatically come on at a time

corresponding to the end of cooking time less

the cooking duration time.

During the “waiting period”, before the oven starts

preheating, the display will show the symbol A,

indicating that an automatic program is running,

together with the current time. The oven switching

on will be notified by the symbol coming on.

The reaching of the end of cooking time will be

notified by an acoustic signal, after which the oven

will automatically switch off. See following sections:

disabling the timer alarm and re-enabling the

oven.

At the end of each cooking operation return the

knobs to the 0 position.

Functions of the electronic programming unit

Timer alarm deactivation

Press any key to manually deactivate the sound

alarm.

Re-enabling the OVEN

At the end of each semi-automatic or automatic

cooking cycle, in addition to the current time, the

flashing A symbol will also be displayed. In these

conditions, power supply to the oven heating

elements and the light will be disconnected.

To reactivate the oven operation press and hold

down the M key until the symbol comes on

and the letter A goes off.

OTHER FUNCTIONS OF THE

PROGRAMMING UNIT:

Cancelling a Semi-automatic or Automatic

program.

To cancel a semi-automatic or automatic cooking

program, A symbol on, press and hold down the –

and + keys at the same time for 2 seconds or until

the symbol comes on and the A symbol goes

off.

Cancelling the timer alarm

To cancel the timer alarm countdown, symbol

on, press and hold down the M key for 2 seconds

or until the symbol starts flashing. Press the –

and + keys at the same time.

Checking the status of the functions

The set, or remaining time for all functions

performed by the programming unit, can be

displayed by pressing the M key. This will give

access to the programming mode. Press and hold

down the M key for 2 seconds or until the

symbol comes on. The display will show the

remaining time or a series of zeros (if the timer is

disabled).

Press the M key again. The display will toggle

between “dur” and the remaining time, or a series

of zeros (if the timer has been deactivated).

Press the M key again to display the end of cooking

time, previously set, and “End”.

Updating the current time or changing the

timer alarm volume

With the programming unit in standard mode,

symbol on, press and hold down the – and + keys

at the same time for 2 seconds or until the dot

starts flashing. To update the time press either the

+ or – keys accordingly. To change the volume of

the timer alarm press the M key. The following will

be shown on the display: n… followed by a

number. Keep pressing the – key until the desired

time is selected.

NOTE: 1 indicates the highest level. Number of

available levels: 3.

WARNING: The interruption of the electric

power supply will cause the resetting of all

programmed function, including the clock. Once

power supply is restored, the programming unit

must be programmed again.

Functions of the electronic programming unit

0 Oven off

Oven light

STATIC FUNCTION

Use when all the food is on the same runner level.

- Preheat the oven to the required cooking

temperature and place the food inside as soon as

the orange thermostat indicator light switches off.

- When using the Static Function the shelf must be

placed on the second level from the bottom.

BOTTOM HEATING FUNCTION

Use this function:

- To finish baking fruitcakes or cheesecakes.

- To thicken sauces.

Use the bottom heating function for the last

minutes of cooking time.

TOP HEATING FUNCTION

Use this function:

- To brown the top surface of fruitcakes or

cheesecakes.

Use the top heating function for the last minutes of

cooking time.

GRILL FUNCTION

Use the grill function to cook small pieces of meat

and to make toast.

- The oven door must be closed during grilling.

- Preheat the grill for about 5 minutes. Arrange the

meat on the shelf with the drip tray underneath.

Oven functions

Pour water into the drip tray to cover the

bottom thus reducing smoke and fat splatters.

- Turn the food over about half-way through

cooking time.

TURBOGRILL FUNCTION (Grill + Fan)

This function is ideal for grilling larger pieces of

meat (roast beef, roasts, chicken, etc.).

- The oven door must be closed during grilling.

- Arrange the meat on the shelf with the drip tray

underneath. Pour water into the drip tray to

cover the bottom thus reducing smoke and fat

splatters.

- Turn the food over about half-way through

cooking time.

PASTRY FUNCTION (Static + Fan)

This function is ideal for cooking quiches, sweet

and savoury pies with liquid or fruit filling (cheese

cake, apple pie etc,) on one level.

- There is no need to preheat the oven (apart from

pizzas and focaccias).

For cooking on two different level:

- Change over the position of the food inside the

oven for a few minutes before the end of

cooking.

- Remove the cooked dish and, if necessary,

continue cooking the other one for as long as

required.

FAN FUNCTION

Use this function when cooking food on more than

one level (fish, vegetables, pasta):

- Choose foods that require the same cooking

temperature

- Oven preheating is not necessary

- Remove the cooked dish and, if necessary,

continue cooking the others for as long as

required.

DEFROST FUNCTION

Ideal for thawing frozen foods to room

temperature.

- The food should be put in the oven in its

wrapping to prevent it from drying out.

Oven functions

Turn the control knob clockwise to the symbol required.

The oven light switches on.

- turn the thermostat knob clockwise to the temperature required.

The orange thermostat light switches on.

- when selected temperature is reached, the orange indicator light switches off.

At the end of cooking:

- Turn the knobs to position 0 or

•

Using the grill

- Place the food directly on the shelf. The shelf must be positioned at the top of the oven. The drip tray

can be placed at the bottom to collect the fat.

Caution: While the grill is operating the accessible parts are very hot: keep children away from

the oven.

- The oven door must be closed during grilling.

WARNING:

Do not use aluminium foil to cover the grill tray or to wrap the food being cooked as the reflected heat

will damage the grill element and the aluminium foil can catch fire.

Using the oven

5019 744 01021/A

Printed in Italy

01/10

KitchenAid KOMS 6910/I Program Chart

Brand: KitchenAid

Model: KOMS 6910/I

Category: Ovens

Type: Program Chart

Download PDF

report

KitchenAid KOMS 6910/I Program Chart

KitchenAid KOMS 6910/I Program Chart

Other documents