Schuchmann 49 02 100 Instructions For Use Manual

Brand: Schuchmann

Model: 49 02 100

Type: Instructions For Use Manual

This manual is also suitable for

Instructions for use.

todd. the moveable standing trainer.

todd.

Many thanks.

Dear Customer

At this point we would like to thank you for placing your trust in our company and

for purchasing our product. We ask you to read through the Instructions for

use carefully prior to initial commissioning of the product, and to observe them.

Please note that guidelines and representations in these Instructions for use may deviate

from your product due to diering equipment. We reserve the right to make technical

modiﬁcations.

Important information!

Ensure that these Instructions for use remain with the product.

Your schuchmann Team

Contents.

1. Preparation. ................................................................................ 05

1.1 Transport ........................................................................................................................05

1.2 Safety measures prior to use ..............................................................................05

1.3 Safe disposal ...............................................................................................................05

1.3.1 Packaging ...........................................................................................................05

1.3.2 Product ................................................................................................................05

1.4 Where to store the Instructions for use ..........................................................05

2. Product description. .................................................................... 06

2.1 Material information ................................................................................................06

2.2 Handling and transport ........................................................................................06

2.3 Application areas, use according to the intended purpose .............07

2.4 Use not in accordance with the intended purpose / warning gui-

delines ............................................................................................................................08

2.5 Equipment for basic model ................................................................................. 08

2.5.1 Equipment acc. HMV (Medical Aids Register) ..................................08

2.6 List of accessories .................................................................................................... 09

2.7 Product overview ...................................................................................................... 09

2.8 General settings ........................................................................................................10

2.9 Getting in and out .....................................................................................................11

3. Settings ...................................................................................... 12

3.1 Angular adjustment of the central column ...................................................13

3.2 Height adjustment on the central column ................................................... 13

3.3 Rear wheels / drum brake .................................................................................... 14

3.4 Wheel camber ............................................................................................................ 15

3.5 Support rollers .............................................................................................................15

3.6 Foot plate .....................................................................................................................16

3.7 Divided foot plate ..................................................................................................... 16

3.8 Heel edges ................................................................................................................... 17

3.9 Footstraps ..................................................................................................................... 17

3.10 Knee pelotte pads .................................................................................................. 17

3.11 Combined spine and pelvic pelotte pad .....................................................18

3.12 Buttocks pelotte pad ............................................................................................. 19

3.13 Chest harness / chest pelotte pad with lateral guide ........................20

3.14 Backstrap ...................................................................................................................20

3.14 Back pelotte pad .................................................................................................... 21

3.16 Headrest ...................................................................................................................... 21

3.17 Therapy table ........................................................................................................... 22

4. Repairs and cleaning. .................................................................. 23

4.1 Cleaning ........................................................................................................................ 23

4.2 Repairs ........................................................................................................................... 23

4.3 Spare parts ................................................................................................................. 23

4.4 Duration of use and re-use ................................................................................ 23

5. Technical data. ............................................................................ 24

6. Guarantee. .................................................................................. 25

7. Identication. ............................................................................. 26

7.1 EC declaration of conformity ............................................................................... 26

7.2 Serial number / date of manufacture .............................................................27

7.3 Product version ...........................................................................................................27

7.4 Issue of the document ............................................................................................27

7.5 Name and address of the manufacturer, specialist dealer supplying

the product ...................................................................................................................27

Contents.

1. Preparation.

1.1 Transport

On receiving the product, please check it for completeness, lack of faults

and any transport damage.

Inspect the goods in the presence of your forwarder

Should transport damage have occurred, please cause an inventory (de-

termination of the faults) to be made in the presence of the forwarder.

Please send a complaint in writing to the specialist dealer responsible.

1.2 Safety measures prior to use

Correct usage of the standing trainer requires precise and careful training

of the accompanying person. We ask you to read through the Instructions

for use carefully prior to initial commissioning of the standing trainer, and

to observe them. Cushioned parts may become warm when exposed to

direct sunlight. Cover these parts or protect the equipment from direct

sunlight.

1.3 Safe disposal

In order to preserve and protect the environment, to prevent environmental

pollution and to improve the recycling of raw materials, please note the

disposal instructions in Points 1.3.1 and 1.3.2.

1.3.1 Packaging

The product packaging should be stored in case the product needs to

be transported again. Should you have to return the product for repairs

or in case of a guarantee claim, please if possible use the original box so

that the product is optimally packaged. Otherwise, separate the packa-

ging materials for recycling according to their classiﬁcation. Do not leave

packaging materials unattended, as they are a possible source of danger.

1.3.2 Product

Separate the raw materials used in the product for recycling according to

their classiﬁcation (see material information under Point 2.1).

1.4 Where to store the Instructions for use

Please store these Instructions for use carefully and ensure that these Ins-

tructions for use remain with the product in case of re-use.

2. Product description.

2.1 Material information

The base frame and the individual elements are made of steel or alumi-

nium which are non-corroding and powder-coated. All body supports

(except for the knee pelotte pads) are padded and covered. The covers

are made of 100% polyester or polyamide textile substrate, and are ﬂame

resistant (according to DIN EN 1021-1+2).

2.2 Handling and transport

The standing trainer is not designed to be carried, as it is ﬁtted with castors.

Should you have to carry the equipment due to obstacles, ensure that all

moving parts are tightened. Then two people should position themselves

next to the standing trainer, grip it on the left and right of the frame and

carry it to the required location. To transport the standing trainer, reduce

all adjustments to their most compact size (set lowest height etc.).

2. Product description.

2.3 Application areas, use according to the intended purpose

Indications

The standing trainer todd. is designed for indoor use and allows the user

to move around by means of drive wheels with handrims. It serves to train

standing in users who can hardly stand or who cannot stand, in particular

due to:

• Paraplegia

• Advanced multiple sclerosis

• Cerebral paresis

• Muscular dystrophy

Contraindications

In general, the indications for standing should be approved by a doctor or

orthopedist. It should therefore be clariﬁed prior to procurement whether

contraindications exist for the patient. In general, any type of pain repre-

sents a contraindication. No standing trainer care should be conducted

without establishing prior to use whether the patient has an abnormal foot

position which requires medical attention.

Depending on the disease symptoms and therapy, please clarify how long

the user may stand in the standing trainer. The following symptoms may

occur in some cases:

• Circulation problems

• Pain in the leg and back areas

• Spastic seizures

It must also be clariﬁed whether the user can be brought into full standing

position. For many users, only standing in a bent position is possible at ﬁrst.

Never correct posture using force or strong pressure!

2. Product description.

2.4 Use not in accordance with the intended purpose / warning guide-

lines

• Ensure that the standing trainer is only used by one child/teenager.

• The standing trainer may only be used indoors on solid, even ground.

• Never leave the user unattended in the standing trainer.

• Correct usage of the standing trainer requires precise and careful

training of the accompanying person.

• The max. load (see Point 5) may not be exceeded.

• Do not use the standing trainer if it has defective, worn or missing parts.

• For reasons of ﬁre safety, the standing trainer may not be placed close

to an open ﬁre or any other strong source of heat such as electric or

gas heaters.

• Only use accessories and spare parts made by Schuchmann, otherwise

you will endanger the user.

• Only use the standing trainer if all components have been correctly

mounted and adjusted.

• When adjusting the standing trainer there is the risk of trapping or

crushing limbs.

• Users who have diculty reading must have someone read these Inst-

ructions for use aloud so that they understand how to use the standing

exercise trainer.

2.5 Equipment for basic model

• Base frame (standard) with height and depth-adjustable foot support

and four height-adjustable support rollers (75 mm), suspended with

locks at the back

• Base frame (abducting) with individually adjustable footrests, with two

height-adjustable support rollers (75 mm) at the front and one support

roller (30 mm) at the back

• Incl. chest harness, buttocks pelotte pad and three-dimensionally ad-

justable knee pelotte pads with patella recess

• Angular adjustment of the central column mechanical from 0° - 15

• incl. drum brakes, easy to operate via locking lever

• Adjustable wheel camber

2.5.1 Equipment acc. HMV (Medical Aids Register)

Acc. the HMV (Medical Aids Register), the standing trainer todd. requires the

provision of heel edges and footstraps.

2. Product description.

2.6 List of accessories

• Chest structure

• Chest pelotte pad with lateral

guide

• Backstrap

• Knee pelotte pads

• Back pelotte pad

• Pelvic guidance pelotte pad

with lateral guide

• Buttocks pelotte pad

• Pelvic positioner

• Combined spine and pelvic

pelotte pads

• Headrest

• Therapy table with edge

• Shelf basket

• Rear wheels

• Rear wheels with closed hand rims

• Spoke guard

• Foot support

• Individually-adjustable footrests

• Heel edges

• Footstraps

2.7 Product overview

The Fig. below is intended to show you the designation of the most

important components as well as the terms which you will ﬁnd in these

Instructions for use.

Chest pelotte pad with

lateral guide

Combined spine and pelvic

pelotte pad

Knee pelotte pads

with adjustable

positioner

brackets

Therapy table

made from Plexiglas

Central column

can be inclined from 0° - 15°

Support rollers

Divided

foot plate

Buttocks harness /

buttocks pelotte pad

Rear wheels

with hand rims

Hand crank for adjustment

of the pelvic position

For extra safety:

Suspended

support wheels

with parking

brake

2. Product description.

2.8 General settings

todd. is completely assembled and delivered in the smallest possible

setting. Before the user is placed into the standing trainer, the necessary

presettings must be carried out.

User dimensions

Presettings

Taking the user's

dimensions

Carrying out adjustments to the standing trainer see

Body size Foot plate to headrest 3.2 + 3.16

Pelvic height

Adjust the foot plate up to the upper edge of

the buttocks pelotte pad support, then adjust

downwards by approx. 5 cm

3.6 + 3.12

Pelvic depth Depth of the buttocks pelotte pad 3.12

Pelvic width

Width of the combined spine and

Pelvic pelotte pad

3.11

Sternum height

Height of the chest pelotte pad with lateral

guide

3.13

Chest width

Width of the chest pelotte pad with lateral

guide

3.13

Knee height Height of knee pelotte pads 3.10

2. Product description.

2.9 Getting in and out

Once all presettings have been car-

ried out, please ﬁrst lock all two

castors (A) or drum brake (B) for get-

ting in and out. Now bring the cent-

ral column into vertical position (see

Point 3.1) and remove the buttocks

pelotte pad. To remove the buttocks

pelotte pad, loosen the wing nut (C),

pull the pelotte pad upwards and

let the buttocks pelotte pad mount

engage downwards. Now you can

move the user in their wheelchair /

buggy etc towards the standing trai-

ner and apply the locking devices on

the respective device. Lift the user out

of the wheelchair/buggy and place

him/her in the standing unit, insert the

buttocks pelotte pad into the mount

and let it snap back into the upper

position. Now you can undertake the

ﬁne adjustments on the individual

components. Please observe here the

guidelines on the adjustment of the

respective components (see Point 3).

Only have the user get in and out of the

product on stable and at ground.

3. Settings

Settings and adjustments to the product or accessories may only be made

by people who have been given the necessary instructions by a medical

product advisor. Please ensure that none of the user's extremities are in

the respective area when making adjustments of any kind to minimise the

risk of injury.

3. Settings

3.1 Angular adjustment of the central column

The central column can be adjusted

mechanically from 0 - 15° via a clam-

ping lever.

Please secure the standing trainer

against inadvertent rolling away and

apply the parking brake (A). In order

to adjust the angle, loosen the clam-

ping lever (B), bring the central column

into the required position and turn the

clamping lever to tighten again. For

the abducting version, the clamping

lever of the third roller (C) must also be

released before positioning the centre

column and then tightened again.

If the clamping lever is not located in a

position from which it is easy to opera-

te, its position can be changed when

idling by gently pulling the lever away

from the screw.

3.2 Height adjustment on the central column

The black inner proﬁle, which is loca-

ted in the upper part on the central

column, can be pulled out and is thus

adjustable in height. In order to adjust

the inner proﬁle in the upper area (D),

loosen the screws (E+F) and bring the

proﬁle into the required position.

Hold the carriage tightly, otherwise it will slip into the central column under its

own weight.

Only undertake height adjustment if there is no-one in the standing trainer!

After each adjustment, please retighten all screw connections!

3. Settings

3.3 Rear wheels / drum brake

The drive wheels are puncture-free

and removable. Please press the but-

ton in the middle of the wheel hub (A)

and the drive wheel can be easily re-

moved and replaced.

When inserting the quick release axles,

you should be able to hear it engage

with an audible "click".

The standing trainer is equipped with

drum brakes on the drive wheels to

prevent it from rolling away unintenti-

onally and for stability.

Please apply the parking brake (B) to

activate the drum brake.

Check the tight axial t of the quick release axle each time the rear wheel is

mounted!

3. Settings

3.4 Wheel camber

The wheel camber can be individual-

ly adjusted and therefore adapted to

the user.

Please loosen the hexagon socket

screw (A), set the desired angle and

tighten the screw again. Please make

sure that the adjustment of the wheel

camber also changes the width of the

pelvis (see Point 5).

After each adjustment, please retighten

all screw connections!

3.5 Support rollers

The front support rollers are set at

a distance of approx. 1 cm above

the ﬂoor to prevent ﬂoor or carpet

edges. The rear support rollers are

spring-loaded to cushion a possible

impact (e.g. when rocking).

When adjusting the wheel camber,

the positions of these rollers are ch-

anged, but can be readjusted using a

Torx screw (B).

In the abducted version of the todd.

the rear support roller is automatically

adjusted with the adjustment of the

centre column.

After each adjustment, please retighten all screw connections!

for size 1 for size 2 for size 3+4

15° 12° 9°

12° 9° 6°

9° 6° 3°

- 3° 0°

1616

3. Settings

3.6 Foot plate

The foot plate is adjustable in height

and can be altered by loosening the

four screws (A) on the central column

(see Point 3.2). To adjust the depth,

loosen the star screw (B+C), which is

located under the foot plate. Now

bring the foot plate into the required

depth position.

3.7 Divided foot plate

The divided foot plate is height and

width adjustable with additional an-

gular adjustment for a pointed foot

setting. In order to adjust the height

of the divided foot plate, loosen the

screws (D+E) and bring the divided

footplate into the required position. In

order to adjust the divided foot pla-

te in width, loosen the screws (F+G)

on the underside and bring the divi-

ded footplate into the required po-

sition. In order to adjust the divided

foot plate in terms of the angle for

abduction of the legs, loosen the

screw (H) and turn the grub screw (I).

Further angle adjustment, e.g. for

pointed foot position, can be under-

taken via the Allen screw (J). Using a

ratchet joint, the entire divided foot

plate can be adjusted at an angle.

After each adjustment, please retighten

all screw connections!

3. Settings

3.8 Heel edges

The heel edges are mounted onto the

foot plate or the divided foot plate.

They can be adjusted in width, depth

and angle. In order to adjust the width

or the angle, loosen the wing screws (A)

below the foot plate and bring the

heel edges into the required position.

3.9 Footstraps

The footstraps can only be used in

connection with the heel edges. In or-

der to adjust the footstraps, loosen the

hook and eye fastener and bring the

footstrap into the required position.

3.10 Knee pelotte pads

The knee pelotte pads are adjustable

in height, angle and depth. The dis-

tance between the knee pelotte pads

can also be adjusted. In order to ad-

just the height, please hold the knee

pelotte pad tight, loosen the wing

screws (B) and bring the knee pelotte

pad support into the required position.

In order to adjust the depth, the ang-

le and the width, please loosen the

clamping lever (C) and bring the knee

pelotte pad into the required position.

After each adjustment, please retighten

all screw connections!

1818

3. Settings

3.11 Combined spine and pelvic pelotte pad

The combined spine and pelvic pe-

lotte pad is width, height and depth

adjustable.

The height can be adjusted by loo-

sening the screw (A). Now bring the

combined spine and pelvic pelotte

pad into the required position. In or-

der to adjust the width, please loosen

the screw (B) and bring the combined

spine and pelvic pelotte pad into the

required width position. In order to ad-

just the depth, pull the cover from the

pelotte pad and loosen the screws (C).

Now bring the combined spine and

pelvic pelotte pad into the required

depth position.

After each adjustment, please retighten

all screw connections!

3. Settings

3.12 Buttocks pelotte pad

The buttocks pelotte pad is self-lo-

cking and can be adjusted in height

and depth.

In order to lock the buttocks pelotte

pad, please tighten the wing screw

below the support tube (A) after inser-

tion. The fold-down buttocks pelotte

pad mount must then be re-engaged

in the upper position. For depth ad-

justment, button (B) must be pressed

and the buttocks pelotte pad mount

must be moved until it engages (11

depth settings are possible). When

doing so, the mount must be pressed

down slightly to release the locking

mechanism.

To adjust the height, there are hexa-

gon socket screws (C) on the back,

which are easy to loosen. Now bring

the buttocks pelotte pad into the re-

quired position. In addition, the height

can also be adjusted via the height

adjustment on the central column (see

Point 3.2).

If the adjustment range of the but-

tocks pelotte pad is not sucient, the

hand crank (D) can be used to adjust

the depth in order to adjust the depth

of the buttocks pelotte pad including

the pelvis pelotte pad.

After each adjustment, please retighten

all screw connections!

3. Settings

3.13 Chest harness / chest pelotte pad with lateral guide

Both the chest harness and the

chest pelotte pad with lateral gui-

de are adjustable in height, depth

and angle. In addition, the height

can also be adjusted via the height

adjustment on the central column

(see Point 3.2). In order to adjust the

height on the chest harness / chest

pelotte pad itself, please loosen the

four hexagon socket screws (A) and

bring the chest harness / chest pe-

lotte pad into the required position. To

adjust the angle of the chest harness /

chest pelotte pad, loosen the Allen

screws (B) and move the harness / pe-

lotte pad to the required position. To

adjust the depth of the chest harness /

chest pelotte pad, loosen the two Al-

len screws (C) and move the harness /

pelotte pad to the required position.

In order to adjust the width and the

angle of the lateral guide of the chest

pelotte pad with lateral guide, plea-

se remove the chest pelotte pad front

cover, loosen the four hexagon socket

screws (D) and bring the lateral guide

into the required position.

3.14 Backstrap

The backstrap is attached to the

chest pelotte pad with lateral guide.

The strap can be easily opened or

closed using a magnetic plug lock (E).

The strap can be adjusted in length

via the strap guide. Height and depth

adjustments can be undertaken via

the chest pelotte pad with lateral gui-

de (see Point 3.13).

After each adjustment, please retighten all screw connections!

Page is loading ...

Schuchmann 49 02 100 Instructions For Use Manual

Brand: Schuchmann

Model: 49 02 100

Type: Instructions For Use Manual

This manual is also suitable for

Download PDF

report

Schuchmann 49 02 100 Instructions For Use Manual

This manual is also suitable for

Schuchmann 49 02 100 Instructions For Use Manual

Related papers

Other documents