Silvercrest 316130 Owner's manual

Brand: Silvercrest

Model: 316130

Type: Owner's manual

HOT AIR BRUSH STYLING KIT

KIT DE CEPILLO DE AIRE CALIENTE SWC 1000 D1

HOT AIR BRUSH STYLING KIT

Operating instructions

KIT DE CEPILLO DE AIRE CALIENTE

Instrucciones de uso

IAN 316130_1904

US - EN Operating instructions Page 1

US - ES Instrucciones de uso Página 21

Before reading, unfold the page containing the illustrations and familiarize yourself with all functions of the

device.

Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas

las funciones del dispositivo.

US-EN │ 1 ■

SWC 1000 D1

Table of Contents

Introduction .......................................2

Warning types .....................................2

IMPORTANT SAFETY INSTRUCTIONS ....................3

Additional safeguards ...............................5

Important cord information .....................................7

Intended use .......................................7

Items supplied .....................................8

Unpacking ........................................8

Appliance description ...............................9

First use ...........................................9

Operating instructions ..............................10

Connect to power source .................................... 10

Attachment ﬁtting / removal ................................... 11

Turning on /oﬀ / Selecting a heat level .......................... 11

Using the attachments ....................................... 12

Cleaning and maintenance ..........................14

Storage ..........................................14

Tips for the perfect hairstyle .........................15

Disposal .........................................15

Disposal of the packaging ................................... 15

Technical speciﬁcations .............................16

FCC Compliance Statement ..........................16

Troubleshooting ...................................17

3 year limited warranty ............................18

Distributor ........................................19

■ 2 │ US-EN SWC 1000 D1

Introduction

Congratulations on the purchase of your new appliance!

You have chosen a modern, high-quality product. These operating

instructions are part of the product. They contain important informa-

tion about safety, usage, and disposal. Before using the product,

please familiarize yourself with all operating and safety instruc-

tions. This appliance may only be used as described and for the

purposes indicated. Please also pass these operating instructions

on to any future owner.

Warning types

The following warning types are used in these operating instructions:

This is the safety alert symbol. It is used to alert you to

potential injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury and death.

DANGER indicates a hazardous situation that, if not avoided,

will result in death or serious injury.

WARNING indicates a hazardous situation that, if not avoided,

could result in death or serious injury.

CAUTION indicates a hazardous situation that, if not avoided,

could result in minor or moderate injury.

NOTICE indicates information that is considered important,

but not hazardous (e. g. messages related to property damage).

US-EN │ 3 ■

SWC 1000 D1

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are

present, basic safety precautions should always be followed,

including the following:

READ ALL INSTRUCTIONS BEFORE USE!

KEEP AWAY FROM WATER

– As with most electrical appliances,

electrical parts in this dryer are electrically live even when they are

turned oﬀ:

To reduce the risk of death by

electric shock:

1. Always unplug this appliance

immediately after you are done

using it.

2. Do not use while bathing.

3. Do not place or store the appliance where it can fall or be

pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. If an appliance falls into water, unplug it immediately.

Do not reach into the water.

– To reduce the risk of burns,

electrocution, ﬁre, or injury to persons:

1. An appliance should never be left unattended when plugged in.

2. Close supervision is necessary when this appliance is used by,

on, or near children or individuals with certain disabilities.

■ 4 │ US-EN SWC 1000 D1

3. Use this appliance only for its intended purpose as described

in this manual. Use only accessories/attachments recommended

by the manufacturer.

4. Never operate this appliance if it has a damaged cord or

plug, if it is not working properly, or if it has been dropped,

damaged, or dropped into water.

Return the appliance to a service center for examination and

repair.

5. Keep the cord away from heated surfaces. Do not wrap the

cord around the appliance.

6. Never block the air openings of the appliance or place it on

a soft surface, such as a bed or couch, where the air openings

may be blocked. Keep the air openings free of lint, hair, and

the like.

7. Never use while sleeping.

8. Never drop or insert any object into any opening or hose.

9. Do not use outdoors or operate where aerosol (spray) products

are being used or where oxygen is being administered.

10. Do not use an extension cord with this appliance.

11. Do not direct hot air toward eyes or other heat sensitive areas.

12. Attachments may be hot during use. Allow them to cool

before handling.

13. Do not place appliance on any surface while it is operating.

14. While using the appliance, keep your hair away from the air

inlets.

15. Do not operate with a voltage converter.

FOR HOUSEHOLD USE ONLY!

SAVE THESE INSTRUCTIONS

US-EN │ 5 ■

SWC 1000 D1

ADDITIONAL SAFEGUARDS

► Electrocution possible if used or dropped in tub.

► Unplug after using.

► For household use only.

Never use the appliance near water, and keep it away from

sinks, baths and other similar containers. The proximity of water

is hazardous, even if the appliance is turned oﬀ. Always discon-

nect the plug from the electrical outlet after use.

Treated surfaces will be hot during

use and may cause burns. Place hot iron only on ﬂat, non-ﬂam-

mable surfaces. Do not leave unattended.

CAUTION - THIS PRODUCT CAN BURN EYES!

WARNING - BURN HAZARD - KEEP AWAY FROM CHILDREN

■ 6 │ US-EN SWC 1000 D1

► In event of operating malfunctions and before cleaning the appli-

ance, remove the plug from the power socket.

► Disconnect the appliance by pulling on the plug itself, not on the

power cord.

► Do not wrap the power cord around the appliance, and protect

the cord from being damaged.

► Do not kink or crush the power cord, and route it in such a way

as to prevent people from stepping on or tripping over it.

► Never hold the appliance, the power cord or the power plug

with wet hands.

► Unplug the appliance immediately after use. The appliance is

completely free of electrical power ONLY when unplugged.

► Do not open the housing or attempt to repair the appliance

yourself. Should you do so, the safety of the appliance can no

longer be assured and the warranty will become void. Only

allow authorized technicians to repair a defective appliance.

► Ensure that the power cord 4 does not become wet or moist

during use. Route the cord in such a way that it cannot be

crushed or damaged.

► Ensure that objects can never penetrate into the inside of the

appliance, particularly metal hair clips, pins or hairpins.

► Do not cover the air intake 6 while operating the appliance.

Clean the air intake at regular intervals.

► Always use the appliance with the attachments ﬁtted, never

on its own, since the attachment insertion slot 1 becomes hot

during operation.

► Allow the appliance to cool down before attaching or

detaching attachments.

► Use only the supplied original accessories, since these have

been optimized for interaction with the appliance. Other parts

may not be adequately safe.

US-EN │ 7 ■

SWC 1000 D1

► Keep the air inlet and outlet openings clear to ensure unim-

paired air ﬂow. Otherwise, the appliance may overheat.

► Exercise caution when using hair spray, water atomizers, etc.

The air ﬂow may blow these substances directly into your eyes.

Also, these substances must not be allowed to penetrate the

appliance, since they may be ﬂammable, aggressive or electri-

cally conductive.

Important cord information

This appliance has a polarized plug. To reduce the risk of electric

shock, there is only one way this plug is intended to ﬁt into a

polarized outlet. If the plug does not completely ﬁt into the

outlet, reverse the plug. If it still does not ﬁt, contact a qualiﬁed

electrician.

Do not attempt to modify the plug in any way.

Intended use

This appliance is intended for human hair care and only for use in

domestic households.

It is not intended for use on animals or in commercial or industrial

environments.

This appliance is not intended for any other purpose, nor for use

beyond the scope described in these operating instructions.

Claims of any kind for damage resulting from unintended use will

not be excepted. The operator alone bears liability.

■ 8 │ US-EN SWC 1000 D1

Items supplied

The appliance comes standard with the following components:

▯ Hand set

▯ Storage case

▯ Small round brush

▯ Large round brush

▯ Half round brush

▯ Curling tongs

▯ Double brush

▯ Styling jet

▯ Operating instructions

Check the package for completeness and for signs of visible

damage.

If the delivery is incomplete or damage has occurred as a result

of defective packaging or during transport, contact the customer

service hotline (see 3 year limited warranty section).

Unpacking

♦ Remove all parts of the appliance and the operating instruc-

tions from the box.

♦ Remove all packaging material.

RISK OF SUFFOCATION!

Packaging materials should not be used as a toy. There is a risk of

suﬀocation.

US-EN │ 9 ■

SWC 1000 D1

Appliance description

Figure A:

1 Attachment insertion slot

2 "Cool Shot" switch

3 Level switch

4 Power cord

5 Anti-kink protection

6 Air intake

7 Release button

Figure B:

8 Half-round brush

9 Curling tongs

0 Small round brush

q Large round brush

w Double brush

e Styling jet

r Storage bag

First use

■ Before using the appliance for the ﬁrst time, please ensure that

...

– the appliance and its accessory parts are in perfect working

condition,

– all packaging materials have been removed.

■ Clean all of the attachments as described under "Cleaning and

maintenance".

■ 10 │ US-EN SWC 1000 D1

Operating instructions

Connect to power source

This appliance is ﬁtted with a safety connector , which con-

tains a Ground Fault Circuit Interrupter (GFCI). If the appliance

malfunctions (e.g. by coming into contact with water), the GFCI

changes to "oﬀ" and the appliance will no longer have power.

If the Ground Fault Circuit

Interrupter in the safety connector is no longer functioning,

discontinue use. Unplug the safety connector and contact the

customer service department.

We recommend testing the safety connector before each use

to make sure it is functioning perfectly:

1) Plug the safety connector into an electrical outlet. Ensure

that the power being supplied from the electrical outlet match-

es the voltage speciﬁed on the label.

2) Now press the "Test" button . The "Reset" button will jump

out a little more from the safety connector . Now the appli-

ance cannot be turned on again. The Ground Fault Circuit

Interrupter is working.

3) Press the "Reset" button so that it snaps back into place.

You can now use the appliance.

"Reset" button

"Test" button

Safety connector

US-EN │ 11 ■

SWC 1000 D1

Attachment ﬁtting / removal

After operation, the appliance

components may be hot!

Fitting Attachments

■ Insert the desired attachment into the attachment insertion slot

1, so that the front arrow symbol on the attachment points at

the arrow symbol on the attachment insertion slot 1 .

■ Turn the attachment clockwise until it clicks into place. The

back arrow on the attachment now points at the arrow on the

attachment insertion slot 1 .

Removing attachments

■ First turn the appliance oﬀ and allow it to cool down.

■ Press the release button 7 and turn the attachment counter-

clockwise .

■ The attachment can now be removed by pulling it out of the

attachment insertion slot 1.

Turning on /oﬀ / Selecting a heat level

■ After you have inserted the required attachment and connect-

ed the plug to the power socket, you can turn the appliance on

with the level switch 3 and select the output level:

– "OFF" The appliance is turned oﬀ

– "1" for reduced air-ﬂow strength with heat

– "2" for high air-ﬂow strength with heat

■ You turn the appliance oﬀ by sliding the level switch 3 to the

"OFF" position.

■ To ﬁx the styling, you can activate the "Cool Shot" switch 2.

The styling will be ﬁxed by the cool air stream:

– During operation, slide the "Cool Shot" 2 upward.

The air ﬂow will be cooler.

– When you want to deactivate the cool air stream, slide the

"Cool Shot" switch 2 downward.

■ 12 │ US-EN SWC 1000 D1

Using the attachments

Large round brush

This attachment gives the hair more volume or large curls.

■ Wind a slightly damp strand of hair around the large round

brush q.

■ Turn the appliance on to level 1 or 2.

■ When the strand is dry, slide the "Cool Shot" switch 2 upward.

Wait until the strand has cooled.

■ Unwind the large round brush q from the strand.

■ Proceed with the other strands in the same way.

Small round brush 10

With this attachment you can make your hair curly or wavy.

■ Wind a slightly damp strand of hair around the small round

brush 0.

■ Turn the appliance on to level 1 or 2.

■ When the strand is dry, slide the "Cool Shot" switch 2 upward.

Wait until the strand has cooled.

■ Unwind the small round brush 0 from the strand.

■ Proceed with the other strands in the same way.

US-EN │ 13 ■

SWC 1000 D1

Curling tongs

With this attachment you can put small ringlets (angel curls) into

your hair.

■ Secure the tip of the strand with the clip on the curling tongs 9.

■ Then wind the slightly damp strand of hair around the curling

tongs 9.

■ Turn the appliance on to level 1 or 2.

■ When the strand is dry, slide the "Cool Shot" switch 2 upward.

Wait until the strand has cooled.

■ Open the clip of the curling tongs 9 a little and pull the curling

tongs 9 out of the strand.

■ Proceed with the other strands in the same way.

Double brush

This attachment is suitable for drying particularly long hair.

■ Take up a lock of hair near the root using the open double

brush w, then close the double brush w and keep it closed.

■ Turn the appliance on to level 1 or 2.

■ Pull the hair slowly through the double brush w so that the lock

is dried all the way to the ends.

■ Proceed with the other strands in the same way.

Half-round brush 8

The half-round brush 8 is suitable for combing and simultaneous

blow drying of the hair.

Styling jet

With this attachment you can target parts of your hair for styling

and blow-drying.

■ 14 │ US-EN SWC 1000 D1

Cleaning and maintenance

Always remove the safety con-

nector from the electrical outlet before cleaning the appliance.

UNDER NO CIRCUMSTANC-

ES should you immerse the appliance in water or other liquids

during cleaning!

After being cleaned, the appli-

ance must be completely dry before using it again.

Allow the appliance to cool

suﬃciently before cleaning it.

Do not use any aggressive

cleaning liquids or solvents. They could damage the surface.

■ Clean the appliance only with a slightly damp cloth.

■ Allow the appliance to dry completely before using it again or

before storing it.

■ If necessary, wipe the storage bag r or the attachments

8/9/0/ q/w/e with a damp cloth.

■ Clean the air intake 6 regularly with a soft brush.

Storage

■ If you plan to not use the appliance for an extended period,

store it in the storage bag r. The appliance must be cooled

down for this!

US-EN │ 15 ■

SWC 1000 D1

Tips for the perfect hairstyle

■ Only style your hair when it is already almost dry.

■ Divide your hair into individual strands for more volume.

■ You will achieve additional volume by starting to dry your hair

at the hairline and working down towards the ends.

■ After turning the appliance oﬀ, wait for a few seconds before

releasing the curl.

■ Let your hair cool down suﬃciently before combing it out.

■ Fix the hair with a little hairspray.

Disposal

Electrical appliances may not be thrown away as part of normal

household trash. If you can no longer use your electrical appliance,

dispose of it in accordance with the legal provisions applicable

in your state. This will ensure that old electrical appliances are

recycled and environmental pollution is kept to a minimum.

Further information about disposal is available on the Internet

at www.epa.gov.

Disposal of the packaging

Note the marking on the diﬀerent packaging materials and sepa-

rate them as necessary. The packaging materials are marked with

abbreviations (a) and numbers (b) with the following meanings:

1–7: Plastics

20–22: Paper and cardboard

80–98: Composites

Dispose of all packaging materials in an environmentally friendly

manner.

If possible, keep the appliance’s original packaging during the

warranty period so that the appliance can be packed properly

for return shipment in the event of a warranty claim.

■ 16 │ US-EN SWC 1000 D1

Technical speciﬁcations

Supply voltage 125 V ∼ (AC), 60 Hz

Power consumption 1000 W

FCC Compliance Statement

This appliance complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This appliance may not cause harmful interference, and (2)

this appliance must accept any interference received, including

interference that may cause undesired operation.

Changes or modiﬁcations not

expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with

the limits for Class B digital appliances, pursuant to part 15 of

the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequen-

cy energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communi-

cations. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful interference to radio or tele-

vision reception, which can be determined by turning the equip-

ment oﬀ and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and the receiver.

— Connect the equipment to an outlet on a circuit diﬀerent from

that to which the receiver is connected.

— Consult the dealer or an experienced radio/TV technician for help.

US-EN │ 17 ■

SWC 1000 D1

Troubleshooting

Problem Cause Solution

The appliance

does not func-

tion.

• The plug is not

inserted into a

power socket.

• Insert the plug into

a power socket.

• The appliance is

not turned on.

• Turn the appliance

on.

• The appliance is

defective.

• In this case,

contact the

customer service

department.

The appliance

does not get

hot.

• The "Cool Shot"

switch 2 is in the

upward position.

• Slide the "Cool

Shot" switch 2

downward.

• The appliance is

defective.

• In this case, contact

the customer

service depart-

ment.

Page is loading ...

Silvercrest 316130 Owner's manual

Brand: Silvercrest

Model: 316130

Type: Owner's manual

Download PDF

report

in other languages

español: Silvercrest 316130 El manual del propietario

Silvercrest 316130 Owner's manual

Silvercrest 316130 Owner's manual

in other languages

Related papers

Other documents