2. Neotecha
  3. NXR Lined Ball Valve Hand Lever Kit
NXR Lined Ball Valve Hand Lever Kit

Neotecha NXR Lined Ball Valve Hand Lever Kit Installation guide

  • Hello, I'm your chat assistant. I've reviewed the Emerson installation instructions for the Neotecha NXR lined ball valve hand lever kits. This document provides a guide on how to install the hand lever kit, including attaching the notch plate, securing the lever, and using a screw cap. The instructions apply to models 414040D4D03, 414040D1E03, 414040D5F03 and 414040D6F03. I'm ready to answer any questions you have about the installation process or the hand lever kits themselves.
  • How do I attach the notch plate?
    What should be checked before tightening the screws?
    How is the hand lever secured?
    What should I do if there are vibrations?
E
D
C
B
A
414040D4D03 ZA3-0060 DN 15 - DN 25
(NPS½ - NPS 1)
414040D1E03 ZA3-0061 DN 40 - DN 50
(NPS1½ - NPS 2)
414040D5F03 ZA3-0062 DN 80 (NPS 3)
414040D6F03 ZA3-0063 DN 100 (NPS 4)
NEOTECHA NXR LINED BALL VALVE HAND LEVER KIT (DISCONTINUED)
INSTALLATION INSTRUCTIONS (THIS PRODUCT IS NOW DISCONTINUED)
© 2017 Emerson. All Rights Reserved.
GENERAL
This instruction describes the installation of the
following hand lever kits on the NXR ball valves.
INSTALLATION
1. Attach the notch plate of the hand lever
kit (A) to the connection flange of the ball
valve with the two screws (B). Before
tightening the screws please ensure the
‘open position’ of the hand lever suits your
application. Normally the hand lever opens
counterclockwise viewed from above.
2. Put the hand lever (C) to the notch plate and
attach it with the screw (D) to the disc stem
of the ball valve. If you have predictable
vibrations on your pipe system you should
secure the screw with Loctite or a similar
suitable adhesive.
3. Before you attach the screw cap (E) to the
hand lever please check the correct position
and also the overall function of the hand
lever kit.
Emerson.com/FinalControl VCIOM-02666-EN 21/06
Item no. Drawing no. Nominal diameter
This product is now discontinued
DISCONTINUED
2
VCIOM-02666-EN © 2017, 2021 Emerson Electric Co. All rights reserved 06/21. Neotecha is a mark owned by one of the companies in the Emerson Automation Solutions
business unit of Emerson Electric Co. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other marks are the property of their prospective owners.
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed
as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and
conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such products at any time without notice.
Emerson Electric Co. does not assume responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use and maintenance of
any Emerson Electric Co. product remains solely with the purchaser.
Emerson.com/FinalControl
DISCONTINUED
/