Tycon Power POE-SPLT-48G-VUB User guide

Hello, I've reviewed the TYCON Power POE-SPLT-48G-VUB Install Guide. This document provides instructions for installing the PoE splitter and highlights its capability to power two 802.3af PoE devices using a single 802.3at or 48V Passive PoE source. I'm ready to answer your questions about this device and its installation.
What type of cables should be used?

What is the unit designed to power?

What are the power input specifications?

8000053 Rev 1 POE-SPLT-48G-VUB Install Guide April 3 2017

POE-SPLT-48G-VUB Install Guide

1. Route an outdoor rated shielded CAT5/CAT6 cables from the converter unit to the PoE

powered devices as shown in the diagram below. A second cable will be used to connect

the data from the powered Unit 1 to Unit 2