2. Hamilton Beach
  3. TL-1-4H

Hamilton Beach TL-1-4H User guide

  • I have reviewed the instruction manual for the Hamilton Beach water dispenser models TL-1-4, TL-2-4, TL-5-4, and TL-6-4. This document provides detailed instructions on how to properly install the dispenser using a bracket and screws to ensure stability. I'm ready to answer any questions you have about the installation process or other aspects of the device.
  • What is the purpose of the bracket?
    Where should the bracket be fixed?
    Why is it important to follow the instructions?
TL-1-4
TL-2-4
TL-5-4
TL-6-4
Model:
(For TL-1-4 and TL-5-4 models)
WARNING! To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
Machine installation
1. Use the screw to fix the bracket on the hole of the
middle bottom of the water dispenser.
2. Make a hole on the floor’s(or the desk’s) surface
where the water dispenser will be installed.
3. Fix the bracket on the floor by screw tightly.
4. Tighten the screw.
Water dispenser
bracket
The hole for
tighten screw
/