TL-1-4
TL-2-4
TL-5-4
TL-6-4
Model:
(For TL-1-4 and TL-5-4 models)
WARNING! To avoid a hazard due to instability of the appliance, it must be fixed in
accordance with the instructions.
Machine installation
1. Use the screw to fix the bracket on the hole of the
middle bottom of the water dispenser.
2. Make a hole on the floor’s(or the desk’s) surface
where the water dispenser will be installed.
3. Fix the bracket on the floor by screw tightly.
4. Tighten the screw.
Water dispenser
bracket
The hole for
tighten screw
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI