2. jbc
  3. FAE070

jbc FAE070 Owner's manual

  • Hello! I've reviewed the JBC user manual for the Flexible Arm FAE070 and its associated accessories, including the various nozzles and the flexible hose. This document provides details on assembly, usage guidelines, and specifications. I am ready to assist with any questions you might have about the product.
  • What is the maximum table thickness the clamp is suitable for?
    What is the maximum extension of the flexible arm?
    What is the minimum bend radius for the flexible arm?
    How do I replace the nozzle?
FAE070
Flexible Arm with Clamp ø50 mm
INSTRUCTION MANUAL
Packing List
The following items are included:
Flexible Arm ................................................ 1 unit
already assembled:
Ref. FAE083 Round Metal Nozzle for FAE
Manual ............................ 1 unit
Ref. 0019184
Clamp .......................................................... 2 units
Screws* ........................ 2 units
DIN-965 M4x20 - black
Washers* ...................... 2 units
DIN-9021 ø4.3mm - black
This manual corresponds to the following reference:
FAE070
* The supplied screws and washers can be used, as an alternative, to fix the arm to the workbench.
Round Metal Nozzle
for FAE
2
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
Assembly Example
Clamp for mounting the
flexible arm. The clamp
is suitable for a table
thickness of approx.
60mm or less.
* The flexible arm can also
be fixed on the workbench
with the supplied screws
and washers.
FAE 070
Flexible Arm with
Clamp - ø50mm
Take in mind the
installation dimensions
(see page 5 below)
FAE2*
Fume Extractor
FAE010*
Flexible Hose ø50mm
Total length: ~1.6m / ~63in
Connect the Flexible Hose to
Flexible Arm
* Not included, sold separately.
3
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
distance = 0
To avoid breaking the arm, do not extend the
arm more than 70 cm / 27.6 inches from the
center of its base and do not go below the
minimum bend radius of 20 cm / 7.87 inches.
min. bending
radius
20cm
7.87in
workbench
breakage
Do not install the flexible arm on shelves or
higher levels than the work bench. Forced
bending radii can cause the arm to break.
When the flexible arm
loses firmness, it must be
recompressed.
For a greater compression, turn
it slightly clockwise.
Once the arm is compressed,
adapt its position again.
Usage Guidelines
Note: In case of a breakage, the windings can be plugged back into each other. To do this, align the
windings with one another and push them back together with strength.
4
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
www.jbctools.com
STATION 1
Filter
STATION 2
PORT 1
PEDAL 1 PEDAL 2
FAE2
FUME EXTRACTOR
PORT 2
STATION 3 STATION 4
OK
70 cm / 27.6 in max.
The Suppied nozzle can be replaced by one of the following nozzles. Choose the one that best suits
your needs.
Accessories
FAE080
Rectangular Nozzle for FAE
aprox. 170 x 90mm /
6.69x3.54in
FAE081
Round Nozzle for FAE
aprox ø 120mm /
ø 4.72in
FAE082
Large Rectangular Nozzle for FAE
aprox. 227 x 107mm /
8.94x4.21in
Nozzle Replacement
Nozzle in use
with hanging arm
Nozzle lying on
the workbench
The bayonet system makes it
easy to change the nozzle. To do
this, hold the tube with one hand
and with the other turn the nozzle
counter-clockwise and pull it out
to remove the nozzle.
To install a new nozzle, turn the
nozzle bayonet clockwise to
lock it in place.
The nozzles are designed in
such a way that they can be
used with a hanging arm or be
lying on the workbench.
5
Clamp Dimensions
~57mm
~2.24in
~5mm
~0.20in
~72mm
~2.83in
~84mm
~3.31in
max. opening ~60mm
~2.36in
6
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Notes
7
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
Specifications
0019184-080623
FAE070
Flexible Arm with Clamp ø50 mm
Ref. FAE070
- Net Weight: 2.2 kg / 4.89 lb
- Inner Tube Diameter: ø50 mm / 1.97 in
- Fixing Clamp: For a table thickness of approx. 60mm or less
- Total Package Dimensions / Weight: 1050 x 170 x 120 mm / 3.0 kg
(L x W x H) 41.34 x 6.69 x 4.72 in / 6.61 lb
Complies with CE standards.
ESD Safe.
/