2. Shark
  3. QS100Q Series UltraLight Pet Corded Stick Vacuum

Shark QS100Q Series UltraLight Pet Corded Stick Vacuum User manual

  • Hello! I've reviewed the provided Quick Start Guide for the Shark UltraLight Pet Corded Stick vacuum. This guide covers essential information about assembling, using, and maintaining your vacuum. I'm ready to answer your questions about its features, assembly steps, filter maintenance, and how to use its different cleaning modes.
  • How often should I empty the dust cup?
    How often should I rinse the pre-motor filters?
    How often should I rinse the post-motor filter?
    Can I use hot water to rinse the filters?
    What should I do before reinstalling the filters?
QS100Q_QSG_MP_Mv2 © 2021 SharkNinja Operating LLC.
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.
ASSEMB LY
WHAT’S INSIDE TIPS
EMPTYING THE DUST CUP
FLOOR NOZZLE MAINTENANCE
Empty the dust cup after each use.
MAINTENANCE:
Rinse pre-motor filters
once a month and
post-motor filter once
every 9 months. Rinse
with cold water only.
Allow filters to air-dry
completely before
reinstalling.
See enclosed Owner’s
Guide for more
information on how
to clean and replace
the filters.
Attach the onboard storage
clip (D) onto the wand and
place accessories on the
holder.
Debris Intake Access
Check the debris intake
and clear away any dirt
or blockages. To close the
debris intake, press down
on each side until it clicks
into place.
Brushroll
Remove any debris or
hair wrap carefully with
your hands or scissors.
QUICK START GUIDE
When storing, wrap cord
around cord hooks.
For quick cord access,
rotate upper hook down
and remove cord.
For compact storage,
hang the handheld vacuum
from the storage hook
on the wand.
NOTE: For proper operation, ensure all parts
are firmly CLICKED into place.
A
B
D E
FG
(Click)
(Click)
(Snap)
C
A Handheld Vacuum
B Wand
C Floor Nozzle
D Onboard Storage Clip
E Pet Crevice Tool
F Upholstery Tool
G Precision Duster
ULTRALIGHT PET CORDED STICK VACUUM
To clean bare floors and carpets, step on floor
nozzle and tilt handheld vacuum back. Press the
power button to turn on the vacuum and slide
the selector switch to toggle between bare floor
and carpet cleaning.
Press the release button to detach the handheld
vacuum from the wand for precision cleaning.
The tapered tip is great for cleaning furniture
and countertops.
For more reach, detach the wand. Press the release
button on the front of the nozzle neck, and pull the
wand to detach.
To clean stairs or other narrow spaces, attach the
handheld vacuum to the floor nozzle.
VERSATILE FLOOR-TO-CEILING CLEANING
FLOOR MODE
ABOVE-FLOOR HANDHELD
ABOVE-FLOOR WITH WAND
STAIR CLEANING
For questions or to register your product, visit us online at sharkclean.com
@sharkcleaning
For additional parts and accessories, visit sharkaccessories.com
/