HECO Gear Electric Drive Operating instructions

Electric Drive Lubrication Guide

Note: Gearbox should always be oriented with worm gear in the highest horizontal position (as shown)

Heco Gear, Inc. 2350 Del Monte St W Sacramento, CA 95691 Phone (916) 372-5411 www.hecogear.com

How to Fill

1. Place gearbox on a level surface and remove plug from Breather Port (1) and Oil Fill Port (2)

2. Fill unit with 80 ounces of Mobil SHC 634 oil (or equal) via Oil Fill Port (2)

3. Replace plug in Breather Port (1) and Oil Fill Port (2)

General Maintenance

- Replace oil annually

- Check oil level quarterly

Recommended Oil: Mobil SHC 634 oil or equal Oil Capacity: 80 Ounces (2.4 liters)

Common options for Electric Drive Gearboxes

- Nickel-plated shaft, seal carrier and stainless steel seal carrier bolts (A22 option)

- Keyed or flanged output shafts, front flange or center flange gearbox mounting

- Quick turnaround on customized output shafts for your application

Oil Fill Port (2)

Breather Port (1)

Oil Level Port (3)