Chief NS1S1223 Installation guide

Chief
Brand
Chief
Model
NS1S1223
Category
Rack accessories
Type
Installation guide

Chief NS1S1223 side panels are designed for use with Chief® Raxxess S1 Series racks, providing a secure and organized way to mount equipment. These panels are easy to install, attaching to the rack with four 1/4-20 x 1-1/4" security buttonhead cap screws. The panels feature a durable construction and a sleek design that complements any rack system.

Chief NS1S1223 side panels are designed for use with Chief® Raxxess S1 Series racks, providing a secure and organized way to mount equipment. These panels are easy to install, attaching to the rack with four 1/4-20 x 1-1/4" security buttonhead cap screws. The panels feature a durable construction and a sleek design that complements any rack system.

INSTALLATION INSTRUCTIONS
Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes
no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use
of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or
implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Chief Manufacturing, a products division of Milestone AV Technologies
8401 Eagle Creek Parkway, Savage, MN 55378
• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918
8821-002017 Rev01
©2011 Milestone AV Technologies,
a Duchossois Group Company
01/11
NS1S12/20/28/36/41 Side Panels
The NS1S side panels are designed for use with Chief® Raxxess S1 Series racks. See the specific installation instructions provided with the
rack for additional installation information.
TOOLS REQUIRED / PARTS INCLUDED
WARNING: FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN RESULT IN SERIOUS
PERSONAL INJURY, DAMAGE TO EQUIPMENT, OR VOIDING OF FACTORY WARRANTY! It is the installer’s responsibility to make
sure all components are properly assembled and installed using the instructions provided.
IMPORTANT ! : If installing doors (not included) and side panels on an S1 rack, the doors must be installed before installing
the side panels.
A (1)
[Side panel]
B (4)
5/32" [security]
(included)
1/4-20 x 1-1/4"
C (1)
5/32"
[security]
NS1S Side Panels Installation
1. Align two bottom tabs in side panel (A) with slots in S1 rack. (See
Figure 1)
Figure 1
2. Attach side panel (A) to S1 rack with four 1/4-20 x 1-1/4" security
buttonhead cap screws (B). (See Figure 2)
Figure 2
3. Tighten four screws (B) using the 5/32" security hex wrench (C).
4. Attach additional side panels as required.
®Chief is a registered trademark of Milestone AV Technologies. All rights reserved.
(A)
S1 rack
(NS1S1223 rack shown)
2
(A)
(B) x 4
(NS1S1223 rack shown)
  • Page 1 1

Chief NS1S1223 Installation guide

Chief
Brand
Chief
Model
NS1S1223
Category
Rack accessories
Type
Installation guide

Chief NS1S1223 side panels are designed for use with Chief® Raxxess S1 Series racks, providing a secure and organized way to mount equipment. These panels are easy to install, attaching to the rack with four 1/4-20 x 1-1/4" security buttonhead cap screws. The panels feature a durable construction and a sleek design that complements any rack system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents