Miller WIRE FEEDER CART (142382) Owner's manual

Category
Car kits
Type
Owner's manual

This manual is also suitable for

OWNER’S MANUAL
© 2019 MILLER Electric Mfg. LLC
OM-1077 144054H
201911
Wire Feeder Cart (142382) For 20, 22A, 24A, 50, S-60, S-70, And D-60 Series Feeders
1. Safety Symbol Definitions
DANGER! Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The possible
hazards are shown in the adjoining symbols or explained
in the text.
DANGER ! - Indique une situation dangereuse qui, si elle
n’est pas évitée, entraînera la mort ou des blessures
graves. Les éventuels risques sont représentés par les
symboles joints ou expliqués dans le texte.
Fsafe1 2013-10
Beware of electric shock from wiring. Disconnect input
power before installing this kit. Reinstall all panels and
covers.
Attention aux décharges électriques au contact des
câbles. Couper l’alimentation électrique avant d’installer
ce kit. Réinstaller tous les panneaux et couvercles.
Fsafe7 2013-10
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
Indique une situation dangereuse qui, si elle n’est pas
évitée, entraînera la mort ou des blessures graves. Les
éventuels risques sont représentés par les symboles
joints ou expliqués dans le texte.
Fsafe2 2013-10
Wear safety glasses with side shields.
Porter des lunettes de sécurité avec écrans latéraux.
Fsafe8 2013-10
NOTICE
Indicates statements not related to personal injury.
Signale des consignes non associées aux dommages
corporels.
Indicates special instructions.
Fournit des instructions spéciales.
Fsafe3 2013-10
CALIFORNIA PROPOSITION 65 WARNINGS
WARNING: Cancer and Reproductive Harm
www.P65W
arnings.ca.gov
PROPOSITION CALIFORIENNE 65 AVERTISSEMENTS
AVERTISSEMENT : cancer et troubles de la reproduction
www.P65W
arnings.ca.gov
.
Fsafe26 2018-01
OM-1077 Page 2
. Remove paint from axle
grooves (13) before installing
retaining rings (8).
Ref. 144021 / 145362
B
B
1
2
3
4
5
6
13
7
8
9
10
6
12
3
2
1
15
16
17
18
6
11
19
20
21
14
15
1 602101 Screw, 10-24 x 5/8 (4)
1 112277 Screw, 10-24 x 2 (4)
2 602203 Washer, No. 10 lock (4)
3 602238 Washer, 3/16 flat (4)
601861 Nut, 10-24 (4)
4 146296 Stand-Off, No. 10-24 x
1-9/16 (4)
4 601861 Nut, 10-24 (4)
5 604126 Screw, 1/2-13 x 1 (2)
6 602247 Washer, 1/2 flat (6)
7 097455 Wheel, 8 in (2)
8 121614 Retaining Ring (2)
9 603995 Washer, 3/4 flat (2)
10 601879 Nut, 1/2-13 (2)
11 602216 Washer, 1/2 lock (4)
12 255489 Axle Mounting Bracket (2)
13 135390 Axle (1)
14 601959 Screw, 5/16 x 1-1/2 (4)
15 604538 Washer, 5/16 flat (8)
16 602211 Washer, 5/16 lock (4)
17 604537 Nut, 5/16-18 (4)
18 123557 Caster, 5 in (2)
19 124115 Nut, 7/16-14 (2)
20 144020 Base (1)
21 144018 Handle (1)
Be sure to provide Model when ordering re-
placement parts.
Description (Qty)
Part
No.
Item
No.
AB
D
A
ABA
C
D
E
E
E
Top View Of Cart Base
11
Tools Needed:
5/16, 1/2, 9/16, 3/4 in.
. For S-60, S-70 series feeders, install stand-offs (4) in holes labeled A, and secure with four
10-24 x 5/8 in. screws (1), washers (2), and 3/16 in. flat washers (3).
For D-60 series, install stand-offs (4) in holes labeled B, and secure with four 10-24 x 5/8
in. screws (1), washers (2), and 3/16 in. flat washers (3).
For 20 series feeders, install stand-offs (4), in holes labeled C, and secure with four 10-24
x 5/8 in. screws (1), washers (2), and 3/16 in. flat washers (3).
For S-22A, install stand-offs (4), in holes labeled D, and secure with three 10-24 x 5/8 in.
screws (1), washers (2), and 3/16 in. flat washers (3).
For 22A, 24A feeders, install stand-offs (4), in holes labeled E, and secure with three 10-24
x 5/8 in. screws (1), washers (2), and 3/16 in. flat washers (3).
For 50 series, line up holes in feeder base with holes in cart labeled A, and secure with
four 10-24 x 2 in. screws (1), washers (2), 3/16 in. flat washers (3), and 10-24 in. nuts (4).
C
C
D
C
  • Page 1 1
  • Page 2 2

Miller WIRE FEEDER CART (142382) Owner's manual

Category
Car kits
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI