Page is loading ...
LCD-15CA1Z
LCD-20CA1Z
INSTRUCTION MANUAL
LCD Colour Television
Inst. Manual N2JV 6/8/04 2:24 PM Page 1
2
2
Warnings and Cautions . . . . . . . . . . . . . . . . . 3
Connecting the Power . . . . . . . . . . . . . . . . . . 4
Remote Control . . . . . . . . . . . . . . . . . . . . . . . 5
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . 6
Plug & Play . . . . . . . . . . . . . . . . . . . . . . . . . . 7
General Operation
Power ON/OFF . . . . . . . . . . . . . . . . . 8
Auto Shut Off . . . . . . . . . . . . . . . . . . . 8
To Switch Input Mode . . . . . . . . . . . . . 8
Position Selection . . . . . . . . . . . . . . . . 8
Alternate . . . . . . . . . . . . . . . . . . . . . . 9
Volume Control . . . . . . . . . . . . . . . . . 9
Mute . . . . . . . . . . . . . . . . . . . . . . . . . 9
Bass . . . . . . . . . . . . . . . . . . . . . . . . . 9
Recall . . . . . . . . . . . . . . . . . . . . . . . . 9
Still . . . . . . . . . . . . . . . . . . . . . . . . . . 9
On Setup . . . . . . . . . . . . . . . . . . . . . . 9
Video and ECO Settings . . . . . . . . . . .10
Colour and Sound System
Setting of Colour System . . . . . . . . . .11
Setting of SIF System . . . . . . . . . . . . .11
Screen Menu Summary . . . . . . . . . . . . . . . . .12
PICTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
SOUND . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
TIME
TIME . . . . . . . . . . . . . . . . . . . . . . . . .15
ON SETUP . . . . . . . . . . . . . . . . . . . . .16
ON TIMER . . . . . . . . . . . . . . . . . . 16~17
ON POS. . . . . . . . . . . . . . . . . . . . . . . 17
OFF TIMER . . . . . . . . . . . . . . . . . . . . 18
FEATURE
LIMIT VIEW . . . . . . . . . . . . . . . . . . .19
MIRROR TURN . . . . . . . . . . . . . . . . .20
ZOOM . . . . . . . . . . . . . . . . . . . . . . . .20
STILL . . . . . . . . . . . . . . . . . . . . . . . .21
16:9 . . . . . . . . . . . . . . . . . . . . . . . . . .21
PRESET
To Select Colour and Sound System . . 22~23
AUTO . . . . . . . . . . . . . . . . . . . . . . . . .23
SEMI and MANUAL . . . . . . . . . . . . . . . . . . . .24
CHANNEL ARRANGEMENT
Copy Channel . . . . . . . . . . . . . . . . . .25
Skip Channel . . . . . . . . . . . . . . . . . . . 25
Swap Channel . . . . . . . . . . . . . . . . . . 26
Private Positions . . . . . . . . . . . . . . . .27
SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Contents
Connecting to a AV Device with TV
Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . .33
Connection of Antenna . . . . . . . . . . . . . . . . .34
Useful Hints (Problems /Solutions) . . . . . . . . .35
Specifications . . . . . . . . . . . . . . . . . . Back cover
■ About MPP function (MPP is the brief for
"Multi Personal Preference Level ")
By this function, the settings of the picture's
colour, brightness and contrast will be stored
in each channel from 1 to 30, in other words,
the settings will be back automatically
whenever you choose a channel.
Connecting to Other Equipment
Rear Terminal panel . . . . . . . . . . . . . . . . . . .29
Connection of AV1 Input Terminal . . . . . . . 29~30
Connecting to a DVD Player with S-Video
Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Connecting to a DVD Player . . . . . . . . . . . . .32
Connection of Monitor Output Terminal . . . . .33
Inst. Manual N2JV 6/8/04 2:24 PM Page 2
3
3
Warnings and Cautions
Warning
Caution
High voltages are used in the operation of
this television receiver. Do not remove the
cabinet back from your set. Refer
servicing to qualified service personnel.
Do not drop or push objects into the
television cabinet slots or openings.
Never spill any kind of liquid on the
television receiver.
To prevent fire or
electrical shock hazard,
do not expose the
television receiver to
rain or moisture.
When the television receiver is not used
for an extended period of time, it is
advisable to disconnect the AC power
cord from the AC outlet.
Avoid exposing the television receiver to
direct sunlight and other source of the
heat. Do not stand the television receiver
directly on other products which give off
heat. E.g. video cassette players, audio
amplifiers.
Do not place your television on an unstable
cart, stand, shelf or table. Serious injury to an
individual, and damage to the television, may
result if it should fall.
Do not block the ventilation holes in the back
cover. Adequate ventilation is essential to
prevent failure of electrical components.
Do not squash power supply cord under the
television receiver.
If the television is to be built into a
compartment or similarly enclosed, the
minimum distances must be maintained. Heat
build-up can reduce the service life of your
television, and can also be dangerous.
Care for Using TV Monitor
Screen likely damaged by external shock.
When using the TV monitor, following
precautions should be taken.
Do not press or hit the screen face.
Do not write, paint or affix anything on the
screen.
Do not put anything on the TV monitor.
Do not press
Do not hit
Cleaning the TV Monitor
Be sure to disconnect the AC Power Cord
from AC outlet before cleaning the TV monitor.
Gently wipe the screen
and cabinet with dry soft
cloth. Screen is likely
damaged if it is not
maintained properly. Do
not use hard object like
a hard cloth or paper.
Do not use solvents or
abrasive.
Caution
Do not use benzene,
thinner or any volatile
substances to clean the
TV monitor. These
chemicals may
damaged the cabinet
finish.
Inst. Manual N2JV 6/8/04 2:24 PM Page 3
4
4
Connecting the Power
Connecting the power with following steps;
1. Connect AC power cord to AV Adapter.
2. Connect AC Adapter DC output (DC 12V) to DC IN 12V of the TV monitor.
3. Connect AC power cord into AC outlet.
POWER
DC12V
Opening terminal cover
Connecting plug into DC IN 12V terminal.
AC OUTLET
AC POWER CORD
AC ADAPTER
Caution
Do not use without attached cable and adapter, otherwise fire or electric shock may result.
Do not put AC adapter in enclosed place, take appropriate spaces for cooling.
Note: AC adapter becomes little hot while use, this is normal, not malfunctioning.
Inst. Manual N2JV 6/8/04 2:24 PM Page 4
5
5
Remote Control
-/- -
-/- -
P
P
BASS
SURROUND
A•B
HDTV
ZOOM
STILL
VIDEO-S
AUDIO-S
C.SYS S.SYS
ECO
JXPSA
TV /
P
P
MENU
TV/AV Button
RECALL button
NUMERIC button
DIGIT button
COLOUR SYSTEM button
VOLUME (-) button
VIDEO SELECT button
POSITION DOWN button
This button is not used.
This button is not used.
ZOOM button
POWER ON/OFF button
MUTE button
ECO button
ALTERNATE button
SIF SYSTEM button
POSITION UP button
VOLUME (+) button
MENU button
This button is not used.
ON SETUP button
This button is not used.
STILL button
MIRROR RETURN button
To Install Batteries Into the Remote Control
1. Remove the battery compartment cover.
2. Insert two size AA batteries (1.5 V) according to "+" and "-" polarity markings inside the battery
compartment.
3. Close the battery compartment cover.
NOTE:
When remote control doesn't work in normal or stable condition, or it can't control operation of the
TV set, replace the batteries. (exhausted batteries may leak substance detrimental to the remote
control, replace them immediately when they are weak.)
BASS button
Inst. Manual N2JV 6/8/04 2:24 PM Page 5
o
360
o
5
6
6
Control Panel
Each button on the control panel has the same function
with its counterpart on the remote control
Stand-by and
Power Indicator
Remote Control Detector
TIMER Indicator
10 °
5 °
POSITION UP/DOWN button
VOLUME (+/-) button
TV/AV button
MENU button
MAINS ON/OFF button
Screen Position Adjustment :
rotation is possible for a rotation stand.
10
o
Viewing Angle Adjustment:
Tilt front and backward.
Inst. Manual N2JV 6/8/04 2:24 PM Page 6
7
7
Plug & Play
By PLUG & PLAY, when the TV set is powered on for the first time, it will automatically search and
preset all the receivable TV positions.
1
1 Plug the power, connect the antenna, and press the MAINS ON/OFF button on the control panel, the
TV set will automatically search the positions.
I AM SEARCHING ALL
PROGRAMMES,PLEASE WAIT
3
AUTO SET-UP
COMPLETED.
HAPPY VIEWING !
1
2
2 About 10 seconds after automatic search, it will be returned to normal TV status.
■ If no position is found, the TV set will show the message below. Check if the antenna is properly
connected.
NO STATION.
PLEASE CONNECT
ANTENNA PLUG.
After disconnecting the main power and connecting the antenna properly, turn on the TV set again.
It will automatically search the positions from the beginning.
Caution to dealers!
This function comes only when the TV set is powered on for the first time.To restore this function
before this product is delivered to customer, proceed the operation as described below.
1
1 Hold the TV/AV button on the control panel for more than 2 seconds. The message
MEMORY CLEAR" will appear on the screen.
2
2 Press the MENU button on the control panel while the message "MEMORY CLEAR" appearing on
the screen.(less than 5 seconds.) And then the display of "CLEARING xx%" will be on. When it is
appearing "MEMORY CLEARED", the message will disappear. And now, the PLUG & PLAY function
is restored.
NOTE:
When you are proceeding the operations above, the settings of VOLUME LOCK, TUNING LOCK,
PRIVATE POSITIONS and SKIP CHANNELS will be canceled. And the PERSONAL in the VIDEO
setting will reset to factory settings.
Inst. Manual N2JV 6/8/04 2:24 PM Page 7
8
8
General Operation
Power ON/OFF
To Switch the TV set ON or OFF
-/- -
-/- -
P
P
VIDEO S
AUDIO S
C.SYS S.SYS
ECO
TV /
P
P
MENU
Once you connect the AC power cord to the
AC power outlet, the TV set will be in stand-by
status and there is no picture on the screen
but the STAND-BY and POWER indicator
lights red. You can turn on the TV set by
pressing any of the following buttons:
• The POWER ON/OFF button on the remote
control.
• The "P▲” or “P▼” button on the remote
control.
• Any NUMERIC button from 0 to 9 on the
remote control.
• Any button on the control panel except MENU.
While the TV set is turned on, the STAND-BY and
POWER indicator will light green.
To Set the TV set in Stand-by Status.
While a TV program is on, press the POWER
ON/OFF button on the remote control or the
MAINS ON/OFF button on the control panel,
and the TV set will shift to stand-by status
immediately. At this time, there is no picture on
the screen. And the STAND-BY and POWER
indicator will light red.
NOTE:
While the TV set will not be used for a long
period of time, pull off the power plug.
Auto Shut Off
This function is available in the two conditions
below:
1)10 minutes after no signal is input in TV mode.
2) 2 hours after the TV set is turned on by the
ON TIMER function and no operation is done.
To Switch Input Mode
By pressing the TV/AV button, you can select
one input mode from TV, AV1or AV2(DVD).
Position Selection
There are 256 (0-255) positions to select. You
can select the positions by the two operations
described below.
To Select Directly
●Position 0 to 9
Select a position by pressing any of the
NUMERIC buttons.
●Position 10 to 99
Press the DIGIT button and then "--" will be
displayed on the screen. Input 2 digit number
by pressing the NUMERIC buttons
sequentially.
●Position 100 to 199
Press the DIGIT button twice, and then"1--"
will be displayed on the screen.Input 2 digit
number by pressing the NUMERIC buttons
sequentially.
●Position 200 to 255
Press the DIGIT button twice, while "1--" is
displayed on the screen, press the DIGIT
button again and then "2--" will be displayed
on the screen. Input 2 digit number by
pressing the NUMERIC buttons sequentially.
To Make Position Up/Down.
Press P▲ to switch to the next position.
Press P▼ to switch to previous position.
POWER ON/OFF
button
NUMERIC
button
ALTERNATE
button
POSITION
UP/DOWN
button
TV/AV button
RECALL button
DIGIT button
Inst. Manual N2JV 6/8/04 2:24 PM Page 8
9
9
General Operation
-/- -
ECO
P
P
MUTE button
VOLUME (+/-) button
-/- -
BASS
SURROUND
A•B
HDTV
ZOOM
STILL
VIDEO-S
AUDIO-S
P
P
MENU
BASS button
ON SETUP
button
STILL button
Alternate
Press the ALTERNATE button to switch between
the previous position and the current position.
For example, the position you are watching now
is 4, and the position you watched previously is 2.
If you press the ALTERNATE button, Position 2
immediately appears.
Volume Control
Press the VOLUME(+/-) button to turn up or turn
down the volume.
Mute
Should you wish to mute the sound (eg. While
talking on the telephone), press the MUTE button.
To switch the sound back on, press the MUTE
button again.
Bass
Press the BASS button to switch this function ON
or OFF.
Recall
Press the RECALL button to display the On-
Screen indication, including the selected channel
position, colour system, sound system, time and
other information.
Still
While the program is on, Press the STILL button
to freeze the picture on the screen. Press any of
the buttons to release it. You can also operate
this function by menu operation. (See page 21.)
ON Setup
Press the ON SETUP button to decide the sets of
ON TIMER and ON POS. to be ON or OFF. This
function is available only after the ON TIMER and
ON POS. functions have been set.
Inst. Manual N2JV 6/8/04 2:24 PM Page 9
10
10
General Operation
Video and ECO Setting
There are 8 video status to select.
Press the VIDEO SELECT button to choose any of the options of "PERSONAL", "DYNAMIC",
"NATURAL" and "GAME".
PERSONAL
DYNAMIC
GAME
NATURAL
Use this option to recall
your own settings. (See
page15.)
This option gives bright and dynamic
picture. It is suitable for nice playback,
such as DVD program.
-/- -
VIDEO-S
AUDIO-S
P
P
VIDEO SELECT button
This status is specially designed for home
electronic games. Inhibiting strong contrast and
colour, it is beneficial for eye protection.
It gives pictures with natural It gives
pictures with natural
While in the ECO status (by pressing the ECO button), Press the VIDEO SELECT button to choose any
of the options of "ECO PERSONAL" , "ECO DYNAMIC" , "ECO NATURAL" and " ECO GAME".
This product has MPP function (see page 2), it enables that when you change the position or make
power on, Positions 1~30 can select the "PERSONAL" status automatically.
-/- -
ECO
P
P
ECO button
Inst. Manual N2JV 6/8/04 2:24 PM Page 10
11
11
Colour and Sound System
Setting of the Colour System
-/- -
C.SYS S.SYS
P
P
SIF SYSTEM button
Generally, the colour system is in the AUTO status. In case of abnormal colour when receiving a TV or
video program, you may press the COLOUR SYSTEM button repeatedly until the best picture is
obtained.
Each time the COLOUR SYSTEM button is pressed, the colour system changes as follows :
COLOUR:AUTO COLOUR:PAL COLOUR:NTSC COLOUR:NTSC4.43 COLOUR:SECAM
The colourless picture may be showed on the screen while it is in AUTO system, for NTSC4.43 is not
the standard broadcast system. In this state, if you want to select NTSC4.43 system, press the
COLOUR SYSTEM button.
NOTE:
Colour system setting can not be stored while the TV set is not in PRESET status. It can be stored only
when it's set in SEMI or MANUAL in PRESET menu. (See page 24.)
Setting of the SIF System
The setting of SIF system is workable in TV status only.
Usually, the SIF system is set to the position of "AUTO". In case of unclear sound or even no sound of
a certain position, repeatedly press the SIF SYSTEM button until the best sound effect is reached.
Each time the SIF SYSTEM button is pressed, the SIF system changes as follows:
SOUND:AUTO SOUND:D/K SOUND:I SOUND:M SOUND:BG
NOTE:
While in the normal TV status, the setting of SIF system will be automatically stored.
COLOUR SYSTEM button
Inst. Manual N2JV 6/8/04 2:24 PM Page 11
TIME
TIME
TIME (Displays the current time on the screen.)
ON SETUP (Decides the sets of ON TIMER and ON POS. to be
on or off.)
ON TIMER (To set ON time.)
ON POS. (To select the position after setting of ON TIMER.)
OFF TIMER (To set OFF time.)
12
12
Screen Menu Summary
Help you find the item desired.
PICTURE
PICTURE
COLOUR (Adjustment of colour saturation.)
BRIGHT (Adjustment of picture's brightness.)
CONTRAST (Adjustment of picture's light and shade.)
TINT (To adjust the colour standard of NTSC system. It is available
only when signal of NTSC or NTSC4.43 system is received.)
SHARPNESS (To adjust the details of the picture.)
FINE TUNING (Used when poor receiving effect due to weak TV
status, not while in AV status.)
NOISE HUNT (To reduce the interference of the picture.)
WHITE TONE (To adjust the cold and warm colour of the whole
picture.)
SOUND
SOUND
BASS (Adjustment of bass.)
VOL ADJ. (Adjust volume of each position to equal level
automatically to avoid sharp volume change between
different positions.)
FEA
FEA
TURE
TURE
LIMIT VIEW (To limit the watching time of all positions only one
time.)
MIRROR TURN (To switch the picture between M, 180M,180 and
normal status.)
ZOOM (To switch the picture between SMALL, MID and normal
status.)
STILL (To freeze the picture.)
16:9 (Displays the picture on 16:9, not available in TV mode.)
PRESET
PRESET
AUTO (To search and store the receivable positions automatically.)
SEMI (To preset a certain channel into a certain position.)
MANUAL (To finely tune individual channel with poor reception.)
SETTING
SETTING
VOLUME LOCK (Enables limitation on the maximum volume.)
TUNING LOCK (Prevents the PRESET operated by others.)
SCREEN SAVE (Displays protecting picture or in blue screen.)
START MODE (To be turned on in selected mode automatically.)
MUSIC MODE (Only leaving music to play on.)
CD MODE (Provides music while audio signal is available only in AV
mode.)
LANG. SELECT (Not workable in this model.)
RESET (Restores factory settings.)
MAIN MENU
MAIN MENU
PICTURE
SOUND
TIME
FEATURE
PRESET
SETTING
Inst. Manual N2JV 6/8/04 2:24 PM Page 12
13
13
PICTURE
In the PICTURE menu, you can adjust these functions: COLOUR(from 0 to 63), BRIGHT(from 0 to 63),
CONTRAST(from 0 to 63), TINT(from -32 to +31), SHARPNESS(from 0 to 31), FINE TUNING(BW/FW),
NOISE HUNT(OFF, LOW, MID and HIGH) and WHITE TONE(NORMAL, WARM and COOL).
The setting procedure below is taking the adjustment of COLOUR as example.
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
MENU button
ALTERNATE
button
VIDEO SELECT button
1
1 Press the MENU button and the main menu
will appear. Press the POSITION UP/DOWN
button to select PICTURE.
: SELECT
: ENTER
:
EXIT
2
2 Press the VOLUME(+/-) button to enter
PICTURE menu. Whenever the PICTURE
menu is accessed initially, COLOUR will be
the default selection. If you want to select
other items, press the POSITION UP/DOWN
button.
COLOUR
BRIGHT
CONTRAST
TINT
SHARPNESS
FINE TUNING
NOISE HUNT
WHITE TONE
BW FW
LOW
NORMAL
26
18
30
-22
25
: SELECT
: ADJUST
P P
: : BACK
EXIT
3
3 Press the VOLUME(+/-) button to adjust.
COLOUR
BRIGHT
CONTRAST
TINT
SHARPNESS
FINE TUNING
NOISE HUNT
WHITE TONE
BW FW
LOW
NORMAL
38
18
30
-22
25
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
4
4 Press the MENU button to go back to the
normal TV status.
In this way, the data adjusted of picture
(COLOUR, BRIGHT and CONTRAST) will be
automatically stored in PERSONAL of the video
setting. When the VIDEO SELECT button is
pressed to select PERSONAL, the display will
shift to PERSONAL status automatically, and
recall the preset status.
NOTE:
The product provides MPP function in the
Positions 1~30. With this function, the data of the
picture setting you have adjusted in each position
will be stored in PERSONAL of the position. That
means there is a different and independent PER-
SONAL setting in each position. It enables you to
enjoy the programs conveniently.
VOLUME(+/-) button
POSITION
UP/DOWN
button
Inst. Manual N2JV 6/8/04 2:24 PM Page 13
14
14
SOUND
In the SOUND menu, you can adjust these functions: BASS(ON/OFF) and VOL ADJ. (from 00 to 15).
The setting procedure below is taking adjustment of BASS as example.
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
ALTERNATE
button
VOLUME(+/-) button
1
1 Press the MENU button and the main menu
will appear. Press the POSITION UP/DOWN
button to select SOUND.
: SELECT
: ENTER
:
EXIT
2
2 Press the VOLUME(+/-) button to enter
SOUND menu. Whenever the SOUND
menu is accessed initially, BASS will be
the default selection. If you want to select
other items, press the POSITION UP/DOWN
button.
BASS
VOL ADJ.
05
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
3
3 Press the VOLUME(+/-) button to adjust.
BASS
VOL ADJ.
05
ON
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
4
4 Press the MENU button to go back to the
normal TV status .
NOTE:
The VOL ADJ. (volume adjust) function is only
available in Positions 1~30 in TV mode.
MENU button
POSITION
UP/DOWN
button
Inst. Manual N2JV 6/8/04 2:24 PM Page 14
15
15
TIME
TIME
In the TIME menu, you can adjust these functions: TIME, ON SETUP, ON TIMER, ON POS. and OFF
TIMER.
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
ALTERNATE
button
MENU button
Once TIME has been set, whenever press the
RECALL button, the time you have set will
display on the screen.
1
1 Press the MENU button and the main menu
will appear. Press the POSITION UP/DOWN
button to select TIME.
: SELECT
: ENTER
:
EXIT
2
2 Press the VOLUME(+/-) button to enter TIME
menu. Whenever the TIME menu is accessed
initially, TIME will be the default selection.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
0:00
0:00
13
ON
OFF
: SELECT
: ENTER
P P
: : BACK
EXIT
3
3 Press the VOLUME (+/-) button to select hour
and then press POSITION UP/DOWN button
to set it. Set minute in the same way.
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
4
4 Press the MENU button to go back to the
normal TV status.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:00
0:00
13
ON
OFF
: ADJUST
: SELECT
P P
: : BACK
EXIT
POSITION
UP/DOWN
button
VOLUME(+/-) button
Inst. Manual N2JV 6/8/04 2:24 PM Page 15
16
16
TIME
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
VOLUME(+/-) button
ON SETUP
When this function is set "ON", the set of "ON
TIMER" and "ON POS." will available. And when
it is set "OFF", the two functions will not
workable.
1
1 Refer to the steps 1~2 described in "TIME" to
enter TIME menu. Press the POSITION
UP/DOWN button to select ON SETUP.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
0:00
13
ON
OFF
: SELECT
: ENTER
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
3
3 Press the MENU button to go back to the
normal TV status.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
0:00
13
ON
OFF
: SELECT
: ENTER
P P
: : BACK
EXIT
2
2 Press the VOLUME(+/-) button to select ON
or OFF.
ON TIMER
With this function, you won't miss any
opportunity to watch the preset position.
° Leaving the TV set on stand-by status after
setting the ON TIMER, when the set time is
reached, the TV set will automatically start on.
[NOTE: The position you have set in
"ON POS." menu (page 17), or the one
watched last will be shown on automatically.]
° While a TV program is on, if the set time is
reached, the display of "WARN" or the preset
position will appear on the screen.
(According to the presetting you have made.)
° While you are out, if the TV set turns on
automatically when the set time is reached, for
the sake of safety, it will shift to stand-by
status automatically about 2 hours later if no
operation is done.
° Once ON TIMER has been set, the TIMER
indicator will light yellow.
1
1 Refer to the steps 1~2 described on page.15
to enter TIME menu. Press the POSITION
UP/DOWN button to select ON TIMER.
2
2 Press the VOLUME (+/-) button to select hour
and then press POSITION UP/DOWN button
to set it. Set minute in the same way.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
08:16
13
ON
OFF
: ADJUST
: SELECT
P P
: : BACK
EXIT
(To be continued.)
ALTERNATE
button
POSITION
UP/DOWN
button
MENU button
Inst. Manual N2JV 6/8/04 2:24 PM Page 16
17
17
TIME
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
3
3 Press the MENU button to go back to the
normal TV status.
■ To cancel this function, You must set the
"ON SETUP" function (page 16) to "OFF", or
disconnect the power.
ON POS.
The ON POS. function can not be set until you
have finished the setting of ON TIMER.
-/- -
-/- -
P
P
BASS
SURROUND
A•B
ZOOM
VIDEO-S
AUDIO-S
C.SYS S.SYS
ECO
TV /
P
P
MENU
ON SETUP button
1
1 Refer to the steps 1~2 described on page 15
to enter TIME adjust menu. Press the
POSITION UP/DOWN button to select ON
POS..
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
08:16
13
ON
OFF
: SELECT
: ADJUST
P P
: : RETURN
EXIT
2
2 Press any of the VOLUME(+/-), NUMERIC,
DIGIT and TV/AV button to select a position
desired or to select WARN(between the
displays of Positions 0 and 255).
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
08:16
29
ON
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
3
3 Press the MENU button to go back to the
normal TV status.
■ If you have selected WARN at step 2, when
the set time is reached, the message below
will display on the screen.
ATTENTION PLEASE
THE TIME IS COMING
The message disappears after 1 minute. You can
also press any button to cancel it.
TV/AV button
RECALL button
NUMERIC
button
ALTERNATE
button
DIGIT button
POSITION
UP/DOWN
button
VOLUME (+/-) button
Inst. Manual N2JV 6/8/04 2:24 PM Page 17
18
18
TIME
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
ALTERNATE
button
MENU button
OFF TIMER
With this function, you can set the OFF time of
the TV set. When the set time is reached, the TV
set will shift to stand-by status.
1
1 Refer to the steps 1~2 described on page 15
to enter TIME menu. Press the POSITION
UP/DOWN button to select OFF TIMER.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
08:16
29
ON
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
3
3 Press the MENU button to go back to the
normal TV status.
2
2 Press the VOLUME(+/-) button to set the time.
The time to be selected is 30, 60, 90, 120
minutes or OFF.
TIME
ON SETUP
ON TIMER
ON POS.
OFF TIMER
12:20
08:16
29
ON
60 MIN
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ To cancel this function, just select "OFF" in
step 2, or to shut off the power by pressing
the POWER ON/OFF button on the remote
control or the MAINS ON/OFF button on the
control panel.
NOTE:
1. When it is 1 minute before the OFF time you
set, the information of each item you have set
in TIME menu will display on the screen to
take your attention.
2. If you want to know the status of TIME when
the program is on, press the RECALL button
and the information will appear.
POSITION
UP/DOWN
button
VOLUME(+/-) button
Inst. Manual N2JV 6/8/04 2:24 PM Page 18
19
19
FEATURE
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
LIMIT VIEW
In the FEATURE menu, you can adjust these
functions: LIMIT VIEW, MIRROR TURN, ZOOM,
STILL and 16:9.
1
1 Press the MENU button and the main menu
will appear. Press the POSITION UP/DOWN
button to select FEATURE.
: SELECT
: ENTER
:
EXIT
2
2 Press the VOLUME(+/-) button to enter
FEATURE menu. Whenever the FEATURE
menu is accessed initially, LIMIT VIEW will be
the default selection.
LIMIT VIEW
MIRROR TURN
ZOOM
STILL
16:9
SET
OFF
OFF
OFF
OFF
: SELECT
: ENTER
P P
: : BACK
EXIT
Used to limit the watching time of all positions
only one time.
3
3 Press the VOLUME(+/-) button to display the
set menu of PASSWORD.
PASSWORD
MIRROR TURN
ZOOM
STILL
16:9
????
OFF
OFF
OFF
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
1~9
4
4
Input the password (8888) by pressing the
NUMERIC buttons to display SELECT
menu. (The password can not be modified.)
5
5 Press the VOLUME(+/-) button to set time
desired. The time to select increases or
decreases by 30 minutes each time when the
VOLUME(+/-) button is pressed. The maximum
setting is 240 minutes.
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
6
6 Press the MENU button to go back to the
normal TV status .
NOTE:
If the time is set on "0", the picture will be black
out immediately. To return to normal TV status,
set it to "OFF". Or input the password in the
black out picture on the screen. If you disconnect
the power of the TV set after having set LIMIT
TIME(30~240 minutes), when you turn on the TV
next time, it will immediately turn in LIMIT TIME
mode.
SELECT
MIRROR TURN
ZOOM
STILL
16:9
OFF
OFF
OFF
OFF
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
ALTERNATE
button
POSITION
UP/DOWN
button
VOLUME(+/-) button
MENU button
Inst. Manual N2JV 6/8/04 2:24 PM Page 19
FEATURE
20
20
-/- -
-/- -
P
P
VIDEO-S
AUDIO-S
C.SYS S.SYS
P
P
MENU
MIRROR TURN
1
1 Refer to the steps 1~2 described on page 19
to enter FEATURE menu. Press the
POSITION UP/DOWN button to select
MIRROR TURN.
LIMIT VIEW
MIRROR TURN
ZOOM
STILL
16:9
SET
OFF
OFF
OFF
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
2
2 Press the VOLUME(+/-) button to select
"M"(left/right), "180M"(up/down),
"180"(up/down/left/right) or "OFF" (normal
status). ("180M" is the example.)
LIMIT VIEW
MIRROR TURN
ZOOM
STILL
16:9
SET
OFF
OFF
180M
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
It is used to switch the picture between M,
180M,180 and normal status.
LIMIT VIEW
MIRROR TURN
ZOOM
STILL
16:9
SET
OFF
OFF
OFF
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
3
3 Press the MENU button to go back to the
normal TV status.
ZOOM
It is used to display the picture on SMALL, MID
or normal size.
1
1 Refer to the steps 1~2 described on page 19
to enter FEATURE menu. Press the
POSITION UP/DOWN button to select
ZOOM.
2
2 Press the VOLUME(+/-) button to select "MID",
"SMALL" or "OFF" (normal size).
LIMIT VIEW
MIRROR TURN
ZOOM
STILL
16:9
SET
MID
OFF
OFF
OFF
: SELECT
: ADJUST
P P
: : BACK
EXIT
■ Return to the main menu by pressing the
ALTERNATE button.
The on-screen menu will disappear
automatically when no operation is done in
15 seconds.
3
3 Press the MENU button to go back to the
normal TV status.
ALTERNATE
button
POSITION
UP/DOWN
button
MENU button
VOLUME(+/-) button
Inst. Manual N2JV 6/8/04 2:24 PM Page 20
/