Auriol HG02918A Operation and Safety Notes

Page is loading ...

GB/IE/NI Operation and safety

notes

Page 5

DK Brugs- og

sikkerhedsanvisninger

Side 33

FR/BE Instructions d‘utilisation

et consignes de sécurité

Page 60

NL/BE Bedienings- en

veiligheidsinstructies

Pagina

90

DE/AT/CH Bedienungs- und

Sicherheitshinweise

Seite

118

Page is loading ...

5 GB/IE/NI

List of pictograms used ......................... 6

Introduction .................................... 6

Intended use .................................... 7

Parts description.................................. 7

Technical data ................................... 9

Scope of delivery................................. 9

General safety instructions ....................10

Safety instructions for batteries/rechargeable batteries . 12

Before initial use ..............................20

Powered by batteries .............................20

Powered by low voltage source.....................20

Replacing/removing the batteries . . . . . . . . . . . . . . . . . . 21

Initial use......................................21

Changing basic settings...........................21

Changing alarm settings ..........................24

Activate and deactivate the alarm function ............25

Using the snooze function .........................26

Changing day/night setting.......................26

Using the sound-controlled function..................27

Troubleshooting ...............................28

Cleaning and care .............................29

Disposal.......................................29

Simpliﬁed EU declaration of conformity ........32

6 GB/IE/NI

List of pictograms used

Direct current

Polarity

Suitable for indoor use only

USB ALARM CLOCK

 Introduction

We congratulate you on the purchase of your new product.

You have chosen a high quality product. The instructions for

use are part of the product. They contain important information

concerning safety, use and disposal. Before using the product,

7 GB/IE/NI

please familiarise yourself with all of the safety information and

instructions for use. Only use the product as described and for

the speciﬁed applications. If you pass the product on to anyone

else, please ensure that you also pass on all the documentation

with it.

 Intended use

This product shows time, date and indoor temperature. The

product is only suitable for use in private households and is not

intended for commercial use.

 Parts description

1

SET button: Press this button to switch among the

time/date/temperature display. Hold this button to

access the basic settings mode. Conﬁrm settings with this

button.

2

UP button: Press this button to select the time display

format 12 hrs or 24 hrs. Press and hold this button to

activate/deactivate sound-controlled function.

8 GB/IE/NI

3

DOWN button: Press this button to access the

day/night setting mode. Press and hold this button

to select between time display and alternating

time/date/temperature display. A ‘’Beep’’ sound will be

heard while the display change is conﬁrmed.

4

ALARM button: Press this button to access the alarm

settings mode. Press and hold this button to active or

deactivate the alarm function.

5

SNOOZE button: Press this button to active the snooze

function when the alarming. Press and hold this button to

deactivate the snooze function.

6

USB socket

7

Battery compartment

8

Battery compartment cover

9

PM indicator

10

Display

9 GB/IE/NI

11

Alarm indicator (in the time display), degree indicator (in the

temperature display)

12

USB cable

 Technical data

Operating voltage: 4.5 V (direct current)

Batteries: 3 x batteries LR03 (type AAA, 1.5 V)

Temperature range: approx. 0–50 °C (32–122 °F)

USB cable polarity

of the power supply:

, 5 V

(direct current) 200 mA

 Scope of delivery

 1 USB Alarm clock

 3 Batteries LR03

 1 USB cable

 1 Instructions for use

10 GB/IE/NI

General safety

instructions

Before using the product, please

familiarise yourself with all of the

safety information and instructions

for use! When passing this

product on to others, please also

include all the documents!

WARNING! DANGER OF

DEATH AND ACCIDENTS

FOR TODDLERS AND

CHILDREN!

11 GB/IE/NI

This product may be used by

children age 8 years and up,

as well as by persons with

reduced physical, sensory

or mental capacities, or

lacking experience and/or

knowledge, so long as they

are supervised or instructed in

the safe use of the product and

understand the associated risks.

Children should not be allowed

to play with the product.

12 GB/IE/NI

Cleaning and user maintenance

should not be performed by

children without supervision.

Safety instructions for

batteries/recharge-

able batteries

DANGER TO LIFE! Keep

batteries/rechargeable

batteries out of reach of

children.

13 GB/IE/NI

If accidentally swallowed seek

immediate medical attention.

DANGER OF

EXPLOSION!

Never recharge non-

rechargeable batteries.

Do not short-circuit

batteries/rechargeable

batteries and/or open them.

Overheating, ﬁre or bursting

can be the result.

14 GB/IE/NI

Never throw

batteries/rechargeable

batteries into ﬁre or water.

Do not exert mechanical loads

to batteries/rechargeable

batteries.

Risk of leakage of

batteries/rechargeable

batteries

Avoid extreme environmental

conditions and temperatures,

15 GB/IE/NI

which could aﬀect

batteries/rechargeable

batteries, e.g. radiators/direct

sunlight.

Avoid contact with the skin,

eyes and mucous membranes.

In the event of contact with

battery acid, thoroughly ﬂush

the aﬀected area with plenty

of clean water and seek

immediate medical attention.

16 GB/IE/NI

WEAR PROTECTIVE

GLOVES!

Leaked or damaged batteries/

rechargeable batteries can cause

burns on contact with the skin.

Wear suitable protective gloves at

all times if such an event occurs.

In the event of a leakage

of batteries/rechargeable

batteries, immediately remove

17 GB/IE/NI

them from the product to

prevent damage.

Only use the same type of

batteries/rechargeable

batteries. Do not mix used and

new batteries/rechargeable

batteries.

Remove batteries/

rechargeable batteries if the

product will not be used for a

longer period.

18 GB/IE/NI

Risk of damage of the

product

Only use the speciﬁed type of

battery/rechargeable battery!

Insert batteries/rechargeable

batteries according to polarity

marks (+) and (–) on the

battery/rechargeable battery

and the product.

19 GB/IE/NI

Clean the contacts on the

battery/rechargeable battery

and in the battery compartment

before inserting!

Remove exhausted

batteries/rechargeable

batteries from the product

immediately.

20 GB/IE/NI

 Before initial use

 Remove all packaging materials from the product.

 Powered by batteries

 Open the battery compartment cover

8

and insert three

batteries type AAA in the battery compartment

7

. Be

sure the polarity is correct. This is indicated in the battery

compartment

7

. Close the battery compartment

7

.

 Powered by low voltage source

 Plug the USB cable’s

12

round plug into the USB

socket

6

and connect to your computer with a USB port.

Alternatively, you can use a USB adapter, which can be

bought from a retailer.

21 GB/IE/NI

 Replacing/removing the batteries

Note: If the display becomes dim or keeps ﬂashing

continuously, the batteries need to be changed.

 Always replace all the batteries at the same time.

 Only use battery type LR03.

 Open the battery compartment

7

by the handle of the

battery compartment cover

8

.

 If applicable, remove the old batteries. When powered by

batteries, insert new batteries. Check the polarity (shown in

the battery compartment

7

) of the batteries.

 Close the battery compartment

7

. Your product is now

again ready for use.

 Initial use

 Changing basic settings

 Press and hold the SET button

1

for 3 seconds to access

the basic settings mode.

22 GB/IE/NI

 During each of the following programming steps press the

UP button

2

or DOWN button

3

to make a change.

TIP: Pressing and holding the UP button

2

or DOWN

button

3

will quickly increase or decrease the numbers.

 Press the SET button

1

to conﬁrm a setting. You will

automatically advance to the next programming step.

Note: If no changes are made for 15 seconds the product will

automatically return to normal display mode.

The following programming steps can be adjusted one after

the other:

Step Setting Display Explanation

Set year The year display

ﬂashes.

The year can be set up

to 2099.

Set month The month display

ﬂashes.

23 GB/IE/NI

Step Setting Display Explanation

Set day The day display

ﬂashes.

Set hour The hour display

ﬂashes.

Set minute The minute display

ﬂashes.

Set date

format

DDMM

MMDD

The date display

format in Day-Month

(DDMM) or Month-

Day (MMDD).

Ý

Set tem-

perature

unit

°C

°F

The temperature

display unit in degree

Celsius (°C) or degree

Fahrenheit (°F).

Page is loading ...

Auriol HG02918A Operation and Safety Notes

This manual is also suitable for

Auriol HG02918A Operation and Safety Notes

in other languages

Related papers

Other documents