AmpliVox SW664 Operating instructions

SW664
AmpliVox
Brand
AmpliVox
Model
SW664
Type
Operating instructions
#5 Take one horn assembly and
push mounting stud through top
hole in post and tighten with knob.
Repeat with other three horns.
For maximum performance, mount
horns vertically as close to each
other as possible.
#4 Locate post mounting
opening on bottom of amplifier
and set onto amplifier mount
post.
#3 Slide amplifier mount to
desired height and tighten to
speaker post.
#2 Take amplifier mount and
slide onto the speaker post with
the holes.
Take post and slide into tripod.
Tighten tripod clamp to secure
post into tripod.
#1 Stand tripod up and open.
#6 Take one of the two speaker
cables and connect to the top two
horns. Plug cable into Speaker (L)
of amplifier. Repeat with other
cable and plug cable into Speaker
(R) of amplifier.
Speaker / Amplifier assembly is
complete.
Follow separate amplifier
instructions for using the amplifier.
SW 664
Mobile Line Array Hailer
Set-up Instructions
Model S1921 Optional Storage Carry Case
– Heavy duty padded nylon with two hand
straps. Enough room to store horns mounted
to post for quick set-up.
  • Page 1 1

AmpliVox SW664 Operating instructions

SW664
AmpliVox
Brand
AmpliVox
Model
SW664
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents