Pulsar SF116 - v1.0 Operating instructions

Brand: Pulsar

Model: SF116 - v1.0

Category: Network switches

Type: Operating instructions

Pulsar SF116 - v1.0 is a high-quality 16- port PoE switch, designed to provide power and data to IP cameras compliant with the IEEE 802.3af standard. The device is equipped with 16 PoE ports, providing 15.4W of power to each port, and 2 uplink ports (G1/TP, G2/TP) for connecting additional network devices via RJ45 connectors. Additionally, the switch features 2 uplink ports (G1/SFP, G2/SFP) for fiber optic transmission using SFP modules.

The SF116 switch supports auto-learning and auto-aging of MAC addresses, ensuring seamless network connectivity and reducing the risk of network congestion.

SF116

v1.0

SF116 16-port switch for 16 IP cameras

Edition: 1 from 1.10.2016

Supercedes the edition: -------------

Features:

 Switch 16 ports

16 PoE ports 10/100Mb/s, (1÷16 ports) (data and

power supply)

2 ports 10/100/1000 Mb/s (G1/TP, G2/TP2 port)

2 ports 10/100/1000Mb/s SFP (porty G1/SFP, G2/SFP)

 15,4W for each PoE port, supports devices complaint

with the IEEE802.3af standard

 Supports auto-learning and auto-aging of MAC

addresses (1K size)

 LED indication

 Enclosure in Rack 19” 1U cabinets

 Additional assembly elements

 warranty – 2 year from the production date

Example of use.

1. Technical description.

1.1. General description.

SF116 is a 16- port PoE switch designed to supply IP cameras operating in IEEE 802.3af standard.

Automatic detection of any devices powered in the PoE standard is enabled at the 1 – 16 ports of the switch. The G1/TP, G2/TP

ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots; the use of fiber

optic module (GBIC) allows fiber optic transmission.

The operating status of the device (described in the table below) is displayed on the LED display on the front panel.

The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a separate

power cable for each device. This method allows supplying other network devices, such as IP phone, wireless access point or

router.

1.2. Block diagram.

Fig. 1. Block diagram.

1.3. Description of components and connectors.

Table 1. (see Fig. 2)

Element no.

(Fig. 2)

Description

[1]

16 x PoE port (1÷16)

[2]

2 x UPLINK port (G1/TP, G2/TP)

[3]

2 x UPLINK port (G1/SFP, G2/SFP)

[4]

LED lights: power supply and LAN connection status

[5]

Power socket AC 230V

Fig. 2 The view switch'a.

1.4. Technical parameters (table 2.)

Table 2.

Ports

16 x PoE (10/100Mb/s) (RJ-45)

2 x UPLINK (10/100/1000Mb/s) (RJ-45)

2 x UPLINK (10/100/1000Mb/s) (SFP)

with connection speed auto-negotiation and MDI/MDIX Auto Cross)

PoE power supply

IEEE 802.3af (1÷16 ports), 48VDC / 15,4W at each port *

Used pairs 4/5 (+), 7/8 (-)

Protocols, Standards

IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP

Forwarding rate

10BASE-T: 14880pps/port

100BASE-TX: 148800pps/port

Bandwidth

1,6Gbps

Transmission method

Store-and-Forward

Optical indication of

operation

Switch power supply

Link

PoE Status

Power supply

90 ÷ 264VAC 50÷60Hz / 2A @ 230VAC max.

Operating conditions

temperature -10°C ÷ 45°C,

relative humidity 20% - 90%, no condensation

Dimensions (W x H x D)

442 x 44 x 292 [mm]

Additional equipment

plate to be fixed surface, bracket for Rack 19”

Net/gross weight

4,17/4,74kg

Protection class

EN 60950-1:2007

I (first)

Storage temperatur

-20°C ÷ 60°C

Declarations

* The given value of 15,4W per port is the maximum value. The total power consumption should not exceed 192W when all PoE ports are being used.

2. Installation.

2.1. Requirements.

The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal

relative humidity (RH=90% maximum, without condensation) and temperature from -10°C to +45°C. Ensure the free flow

of air around the unit. The PSU shall work in a vertical position that guarantees sufficient convectional air-flow through

ventilating holes of the enclosure.

The switch load balance should be done before installation. The given value of 15,4W per port is the maximum value

referring to a single output. The total power consumption should not exceed 192W when all PoE ports are being used.

The increased demand for power is particularly evident in the case of cameras with heaters or infrared illuminators - when

launching these features, the power consumption increases rapidly, which may adversely affect the operation of the

switch. As the device is designed for a continuous operation and is not equipped with a power-switch, therefore an appropriate

overload protection in the power supply circuit should be provided. The electrical system shall be made in accordance with

applicable standards and regulations.

2.2. Installation procedure.

1. Connect the 230V AC power supply and turn on the device (the power switch next to the power socket).

2. Connect the camera wires to the RJ45 connectors (PoE connectors (sockets RJ45 from 1 to 16).

3. Connect the remaining LAN devices to RJ45 connectors (G1/TP or G1/G2 and SFP/SFP)

CAUTION! G1/TP and G1/SFP connectors can not operate simultaneously

CAUTION! G2/TP and G2/SFP connectors can not operate simultaneously

4. Check the optical indication of switch operation (see Table 3).

Connection schemes

3. Operation indication (see table 3)

Table 3. Operation indication

OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY

YELLOW LED LIGHT (Power)

Indication of the switch's power

supply

OFF – no power supply of the switch

ON – power supply on, normal operation

OPTICAL INDICATION AT THE PoE PORTS (1÷8)

YELLOW LED LIGHT (LINK/ACT)

The connection status of LAN devices, 10MB/s

or 100Mb/s

and data transmission

OFF- no connection

ON - the device is connected; 10Mb/s or 100Mb/s

Blinking – data transmission

GREEN LED LIGHT (PoE)

Indication of the PoE

power supply

at the RJ45 ports

OFF- no power supply at the RJ45 port (the device is not connected or not compliant with

the IEEE802.3af standard)

ON – supply

Blinking – short-circuit or output overload

OPTICAL INDICATION AT THE UPLINK PORT (G1/TP, G2/TP, G1/SFP, G2/SFP)

GREEN LED LIGHT

No light (OFF) - no connection or LAN device is not connected

ON - LAN device connected (port busy, do not connect the device)

Blinking – data transmission (do not connect the device, even if the slot is empty)

CAUTION! G1/TP and G1/SFP sockets can not operate simultaneously

CAUTION! G2TP and G2SFP sockets can not operate simultaneously

WEEE LABEL

Waste electrical and electronic equipment must not be disposed of with normal household waste.

According to the European Union WEEE Directive, waste electrical and electronic equipment

should be disposed of separately from normal household waste.

GENERAL WARRANTY CONDITIONS

1. Pulsar (manufacturer) grants a two-year quality warranty for the equipment, starting from the production date.

2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (selected by the manufacturer) if the

malfunction is due to the manufacturer. It includes manufacturing or material defects, provided that such defects have been

reported within the warranty period (point.1).

3. The equipment subjected to warranty should be brought to the place of purchase or directly to the main office of the

manufacturer.

4. The warranty applies to complete equipment, accompanied by a properly filled warranty claim with a description of the defect.

5. Should the claim be accepted, the manufacturer is obliged to provide warranty repairs, at the earliest convenience, however not

later that within 14 days from the delivery to the service centre of the manufacturer.

6. The repair period mentioned in point 5 may be prolonged, if there are no technical possibilities to carry out the repairs, or if the

equipment has been conditionally accepted, due to the breaking warranty terms by the claimant.

7. All the services are carried out at the service centre of the manufacturer, exclusively.

8. The warranty does not cover the defects of the equipment, resulting from:

- reasons beyond the manufacturer's control,

- mechanical damage,

- improper storage and transport,

- use that violates the operation manual or equipment’s intended use

- fortuitous events, including lightning discharges, power failures, fire, flood, high temperatures and chemical agents,

- improper installation and configuration (failure to follow instruction).

9. The warranty is void in case of construction changes and repairs carried out by any unauthorized service center or in case of

damage or modifications to warranty stickers and serial numbers.

10. The liability of the manufacturer towards the buyer is limited to the value of the equipment determined according to the

wholesale prices suggested by the manufacturer on the day of purchase.

11. The manufacturer takes no responsibility for the defects that result from the damaging, malfunctioning or inability to operate

the equipment especially when resulting from failure to comply with the recommendations and requirements contained in the

manual.

Pulsar

Siedlec 150, 32-744 Łapczyca, Poland

Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50

e-mail: biuro@pulsar.pl, sales@pulsar.pl

http:// www.pulsar.pl, www.zasilacze.pl

Pulsar SF116 - v1.0 Operating instructions

Brand: Pulsar

Model: SF116 - v1.0

Category: Network switches

Type: Operating instructions

The SF116 switch supports auto-learning and auto-aging of MAC addresses, ensuring seamless network connectivity and reducing the risk of network congestion.

Download PDF

report

Pulsar SF116 - v1.0 Operating instructions

Pulsar SF116 - v1.0 Operating instructions

Related papers

Other documents