Designed for high capacity,
reliability, versatility and efficiency
Frymaster’s renowned, patented built-in
FootPrint Filtration System puts filtration
where it’s most convenient to use -- right
within the fryer -- eliminating the need for
additional floor and storage space.
The built-in filtration system is:
Easy to operate utilizing just two han-
dles. The red handle opens and closes the
drain valve, and the yellow handle turns
the filter pump on and off. Rear flush fea-
ture helps remove sediment and return fil-
tered oil to the frypot. Elevated filter pan
ensures no problem with uneven floors.
Quick. The entire filtering process occurs
within a matter of minutes. Large sump
with a secure hold-down ring ensures
proper vacuum and superior filtration.
Convenient. Everything needed for filtra-
tion is built-in for easy operator access.
There is no need to attach a drain spout
or handle a hot hose.
This system is enhanced with a gravity
draining system that aids in the draining
of residual oil into the filter pan so that
drain lines are always open.
FootPrint filter carries a one-year warranty
-- parts and labor.
*Liter conversions are for solid shortening @ 70°F.
Specifications
Standard Features
FPH55 FPH55-2
Models
FootPrint Filtration for
Single H55 Gas Fryers
FootPrint Filtration for Single H55 Gas Fryers
Project
Item
Quantity
CSI Section 11400
Approval
Date
Frymaster
™
®
Options &
Accessories
• Self-contained FootPrint® filter -- extends oil
life, saves money
• Fits conveniently under one fryer requir-
ing no additional floor space
• Filter cycle is complete from start to finish
in under 5 minutes
• Filter pan designed on rails to clear floor-
mats for easy cleaning
• Filter pan with gravity drain design leaves
minimal residue oil behind after filtering
• Filter pan is lightweight and easy to
remove for cleaning
• Oil circulates and returns through rear
frypot oil flush
• 1/3 H.P. filter motor
• 4 GPM pump
See H55 specification sheet for
fryer options
Shown with optional computer
8700 Line Avenue
Shreveport, LA 71106-6814
USA
Tel: 318-865-1711
Tel: 1-800-221-4583
Fax: 318-868-5987
E-mail: info@frymaster.com
www.frymaster.com
Bulletin No. 818-0184 12/08
• Stainless steel crumb catcher
• 1 box of 25 prepackaged appli-
cations of Filter Magic® powder
• 1 box of 25 sheets of Filter
Magic paper
Frymaster
™
®
FootPrint Filtration for Single H55 Gas Fryers
Model #_______________
CSI Section 11400
8700 Line Avenue
Shreveport, LA 71106-6814
USA
Tel: 318-865-1711
Tel: 1-800-221-4583
Fax: 318-868-5987
E-mail: info@frymaster.com
www.frymaster.com
Bulletin No. 818-0184 12/08
Litho in U.S.A. ©Frymaster, LLC
MODEL NO. DRAIN HEIGHT NET WEIGHT SHIPPING INFORMATION
WEIGHT CLASS CU. FT. DIMENSIONS
FPH55
FPH55-2
13-1/2”
(343 mm)
235 lbs.
(107 kg)
265 lbs.
(121 kg)
85 31.95 H
47”
(1194 mm)
W
25”
(635 mm)
L
47”
(1194 mm)
DIMENSIONS
NOTES
Supply Voltage 120V 60Hz -- Control Voltage 24V 60 Hz.
120 VAC 5 ft. (1.5 m) grounded cord set provided.
Recommended minimum store manifold pressure to be 6” W.C. for NAT
Gas, and 11” W.C. for L.P. Check plumbing codes for proper supply line
sizing to attain burner manifold pressure of 3.0” W.C. natural or 8.25”
W.C.
L.P. Incoming supply line should be 1-1/2”.
All units require a 3/4” connection. Should flexible gas line be used, it
must be AGA approved, commercial type and at least 1” I.D.
CLEARANCE INFORMATION
A minimum of 24” (610 mm) should be provided at the front of the unit
for servicing and proper operation, and 6” (152 mm) between the sides
and rear of the fryer to any combustible material.
13.50
[343]
DRAIN
HEIGHT
FILTER DRAIN
FRONT VIEW
TOP VIEW
SIDE VIEW
6.50
[165]
6 ft. (1.8m)
CORD SET 120V
PROVIDED
GAS LINE
6.00
[152]
15.63
[397]
GAS LINE
14.00
[356]
21.00
[533]
10.25
[260]
45.30
[1151]
35.50
[902]
35.69
[907]
31.58
[802]
27.09
[688]
We reserve the right to change specifications appearing in this bulletin without incurring any obligation for equipment previously or subsequently sold.
Check www.frymaster.com for updates
/
