Chiayo DWR-2410M Owner's manual

Chiayo
Brand
Chiayo
Model
DWR-2410M
Type
Owner's manual

Chiayo DWR-2410M is a 2.4GHz digital receiver module that allows for wireless audio transmission. It can be used in various scenarios, such as in-ear monitoring systems, wireless guitar systems, or any other application where wireless audio transmission is required.

The device features an LCD display that shows the channel, frequency, and transmitter battery level. It also has an RF audio meter that indicates the signal strength and an audio signal meter that shows the audio level.

The DWR-2410M has a built-in squelch function that can be used to reduce interference and a channel scanning function that can be used to find a clear channel. It also has a synchronization function that can be used to automatically synchronize the receiver and transmitter to the same channel.

Chiayo DWR-2410M is a 2.4GHz digital receiver module that allows for wireless audio transmission. It can be used in various scenarios, such as in-ear monitoring systems, wireless guitar systems, or any other application where wireless audio transmission is required.

The device features an LCD display that shows the channel, frequency, and transmitter battery level. It also has an RF audio meter that indicates the signal strength and an audio signal meter that shows the audio level.

The DWR-2410M has a built-in squelch function that can be used to reduce interference and a channel scanning function that can be used to find a clear channel. It also has a synchronization function that can be used to automatically synchronize the receiver and transmitter to the same channel.

Operation manual
CHIAYO ELECTRONICS CO.,LTD.
DWR-2410M
2.4GHz Digital Receiver Module
1
DWR-2410M
2.4GHz Digital Receiver Module
Parts and functions
1.
LCD
2.
Synchronization button
3.
DOWN button
4. UP button
5. SET button
6.
Power switch/volume control
7.
Antenna socket (SMA type)
After power on, the LCD will display channel-frequency in use, which should be the same of the
transmitter. When transmitter is turned on, the RF audio meter bars will appear to indicate that it
is connected.
1. RF audio meter
2. Channel
3. Transmitter battery meter
4. Audio signal meter
5. Frequency
6. Menu ►group
7. Menu ►scan
8. Menu ►channel
CHANNEL scanning
For an interference-free operation, a cleaner channel might be necessary if the current one
receives too much interference. Before scanning, the transmitter must be switched off.
To operate the scanning:
1 Press-release ▲(UP) or ▼(DOWN) button
until the LCD displays SER000 and below
frequency icon appears.
2 Press and hold SET button until SER000
flashes to denote readiness for setting.
3 Press-release ▲(UP) or ▼(DOWN) button
to find and locate a clear, interference- free
channel.
4 After a channel is chosen, press SET
button to save the setting.
1
2 3 4 5
6
7
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2410M Digital Wireless Receiver
FREQ
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
FREQ
RF AF
MHz
0 36
SER000
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
RF AF
0 36
SER000
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
RF AF
0 36
SER042
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
1
2
3
4
5
6
7
8
2
Instructions
CHANNEL SYNCHRONIZING of the receiver and transmitter
When interference is encountered try reducing the sensitivity of the receiver, thus less
susceptible to interference. To operate the squelch setting:
1 Press and hold the transmitter’s
synchronizing button until LINK flashes on
the LCD.
2 Press and hold the receiver’s SYNC button
until the frequency icon appears.
After successful channel synchronizing, this
icon will disappear automatically.
Changing CHANNEL / FREQUENCY
1 Press-release ▲(UP) or ▼(DOWN) button
until the below channel icon
appears.
2 Press and hold SET button until the
channel number flashes to denote
readiness for setting.
3 Press-release ▲(UP) or ▼(DOWN) button
to select a new channel.
4 After a channel is chosen, press SET
button to save the setting.
C H : 0 0 0
L I N K
FREQ
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
FREQ CH.
RF AF
MHz
0 06
2407
CH.
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
CH.
RF AF
MHz
0 06
2407
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
CH.
RF AF
MHz
0 06
2407
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
CH.
RF AF
MHz
0 36
2437
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
DWR-2410M
2.4GHz Digital Receiver Module
CHANNEL GROUP setting
1 Press-release ▲(UP) or ▼(DOWN) button
until the below group icon appears.
2 Press and hold SET button until the group
number and the icon flash to
denote readiness for setting.
3 Press-release ▲(UP) or ▼(DOWN) button
to choose a channel group.
Group CH081 has 81 selectable frequencies
from CH1 to CH81.
Group CH189 has 189 selectable frequencies
from CH1 to CH189.
4 After a group is chosen, press SET button
to save the setting.
GRP
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
GRP
RF AF
MHz
0 36
CH08 1
GRP
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
GRP
RF AF
0 36
CH08 1
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
C H
GRP
RF AF
0 36
CH 189
CH
CH.FREQGRP
RF AF
0 6 6
2467
DWR-2400M Digital Wireless Receiver
CHIAYO ELECTRONICS CO.,LTD.
Http://www.chiayo.com.tw
｜
Email: sales@chiayo.com.tw
Office: 30, Lane 27, Section 4, Jen-Ai Road, Taipei 10685, Taiwan
Tel: 886-2-27415741
｜
Fax: 886-2-27525242
Factory: 88, Chung-Hsiao Street 2, Chiayi 60080, Taiwan
Tel: 886-5-2711000
｜
Fax: 886-5-5767611
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Chiayo DWR-2410M Owner's manual

Chiayo
Brand
Chiayo
Model
DWR-2410M
Type
Owner's manual

Chiayo DWR-2410M is a 2.4GHz digital receiver module that allows for wireless audio transmission. It can be used in various scenarios, such as in-ear monitoring systems, wireless guitar systems, or any other application where wireless audio transmission is required.

The device features an LCD display that shows the channel, frequency, and transmitter battery level. It also has an RF audio meter that indicates the signal strength and an audio signal meter that shows the audio level.

The DWR-2410M has a built-in squelch function that can be used to reduce interference and a channel scanning function that can be used to find a clear channel. It also has a synchronization function that can be used to automatically synchronize the receiver and transmitter to the same channel.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents