LEC TF6020 Owner's manual

TF6020W

0844 815 3737

Preparations Before Use

5

Changing the plug

6

10

11

12

17

Using Your Appliance

MODEL

Width(mm)

Depth(mm)

Net volume(litres)

Height(mm)

Energy Rating

Climate Class

Noise(dB(A)re1pw)

Refrigerant type

600

TF6020W

656

1962

292L

A+

ST

41dB(A)

R600a,46g

TF6020W

1 . Top lamp 2 . Glass Shelf

3 . Fridge compartment

4 . Vegetable crisper cover 5 . Vegetable crisper

6 . Door Switch

7 . Freezer mini-drawer

8 . Freezer Drawer 9 . Freezer Compartment

10. Power cord

11. Upper rack

12. Lower rack

13. Pizza Box

14. Adjustable foot

TF6020W

1130mm

1200mm

Allow adequate

Product Characteristics

1. Compartment

· The appliance has two compartments, a fridge compartment and a freezer

compartment.

· Temperatures within each compartment can be adjusted independently to

meet your needs.

· The Fridge compartment can also be turned off independently, which can

help save energy if it is not required to be used f or a period of time.

2. Temperature adjustment by LCD screen

· The LCD screen shows the working condition of the appliance.

· The appliance will alarm automatically if the fridge door has not been

correctly closed.

· There are several modes that can be operated: Intelligent, Fast Cooling,

Fast Freezing, Energy Saving and Lock, etc. Which are explained in more

detail later on in this manual.

· The appliance has a power-off memory, which saves the settings being

used before the power failure occurred.

1. Keys Function

A: Fridge compartment temperature set/fast cooling/turning off and on of the

fridge compartment

B: Operation mode selection

C. Temperature adjustment for each compartment

D. Lock/Unlock

E. Freezer compartment temperature set/fast freezing

2. Display

1. Appliance graphic

2. Fridge compartment symbol

3. Temperature of fridge compartment

4. Fridge compartment off symbol

5. Energy saving symbol

6. Fast cooling symbol

7. Intelligent mode symbol

8. Lock symbol

9. Fast freezing symbol

10. Temperature of freezer compartment

11. Isolation line

12. Freezer compartment symbol

3. Lock and Unlock

Unlock status (symbol 8 off), press key D for 3Secs to lock the display, or

after 30 secs of no operation the system will be automatically locked to avoid

mis-operation. After the system is locked, symbol 8 will be lit, press key D for

3Secs, symbol 8 will go off and the system will become unlocked.

4. Intelligent mode

Press key “B” to select intelligent mode, symbol 7 will come on. The system

will settle the temperature of fridge and freezer compartment to 5℃. and

18? accordingly.

5. Energy saving setting

Press key “B” to select energy-saving mode, symbol 5 will come on. The

system will settle the temperature of fridge and freezer compartment to

7℃.and 15℃ accordingly.

6. Temperature setting for fridge compartment

When the fridge compartment is working, press key “A” once and symbol 2

flickers. Press key “C” to set the temperature for fridge compartment ranging

from 2-8℃ in cycles.

7. Temperature setting for freezer compartment

Press key “E” once and symbol 12 flickers. Press key “C” to set the

temperature for freezer compartment ranging from －16 -－ 22℃ in cycles.

8. Fast cooling setting

When the fridge compartment is working, press key “A” once and symbol 2

flickers. Press key “B” to enter into the “fast cooling” mode and symbol 6 is

on, the fridge will then run under the fast cooling mode. If you need to

cancel fast cooling, press key “A” once and symbol 2 flickers. Press key “B”

to cancel fast cooling and symbol 6 goes off.

9. Fast freezing setting

Press key “E” once and symbol 12 flickers. Press key “B” to enter into fast

freezing and symbol 9 is on, the freezer will then run under the fast freezing

mode. If you need to cancel fast freezing, press key “E” once and symbol 12

flickers. Press key “B” to cancel fast freezing and symbol 9 is off.

10. Fridge compartment on /off

When fridge compartment is working, press key “A” for 3 Secs to turn it off,

where symbol 3 disappears and symbol 4 is on;

When fridge compartment is off, press key “A” for 3 Secs to turn it on,

where symbol 3 appears and symbol 4 is off.

11. Displ ay control

After all operations are complete, the background light will go off

automatically 30 Sec later, the light can be turned back on by pressing any

key.

12. Power failure memory

When the power is switched off, the mode settings at that moment will be

saved and settings will remain the same after the power is switched back

on.

13. Door open alarm

If the fridge door has not been closed and stays open longer than 90 Secs,

the system will alarm. The alarm will stop once the door has been closed.

14. Faulty

When LCD display appears with fault codes E1-E9, this means the

appliance has a fault.

Prompting E1 E2 E6 E9

Fault Fridge

compartment

sensor

Freezer

compartment

sensor

Communication High

temperature

alarm

9

Lamp and replacement

The appliance MUST be disconnected from the power supply before

replacing the lamp.

Remove the Lampshade then detach the LED housing by removing 3 screws -

the LED Lamps can now be replaced (12V/2W DC). Re-fit the LED Housing with

the 3 screws and re-attach the Lampshade.

The lamp is 12V/2W (DC) and replaced after shutting off the power supply.

Please detach the lampshade first, detach the 3 bolts and then replace LED

lamp (detach 3 bolts). Please see the diagram.

Please use the standard accessory.

(The diagram only serves for indication. The real product shall prevail.)

10

11

12

TF6020W

1. Remove the cover board and hinged cover on the top

Remove the bolt covers in order, detach bolts and the cover board on the

top;

Remove the hinged cover on the top; detach the hinge bolts inside and the

top hinge.

2. Detach the wire connecting plug of the main board from the door

3. Detach the door of the cold chamber

(Detach)

Top hinge cover

Bolt cover and bolts

(Detach)

Cover board

Connecting

plug

Remove the door

upward

13

4. Remove the fixing middle-hinge bolts and detach the middle hinge

5. Remove the door of the freezer chamber upward

6. Remove the fixing lower-hinge bolts and detach the lower hinge

7. Replace the parts

a) Replace the lower-hinge bolt to the symmetrical position of lower hinge,

and mount the lower-hinge module to the symmetrical position of the

fridge.

b) Replace the door handle to the symmetrical position of the door.

(Remove the bolt cover with blade and the bolts then to detach the handle)

Middle hinge

Middle-hinge bolt

Remove the door of the

freezer chamber upward

Lower Hinge

14

Replace the self-lock and dog on the freezer door to the symmetrical

position of the door on the left side.

Replace the lead-out direction of the cold-chamber door and the relevant

plastic parts to the symmetrical position of the door.

Self-lock and dog

Change the direction of lead-out and

this long cover board to remount it.

Replace the self-lock and dog of the

cold chamber to the symmetrical

position on the left side.

Bolt Cover

Bolt

Bolt cover cap

15

8. Mount the freezer door remodeled as above to the lower hinge.

9. Mount the middle hinge to the symmetrical position with bolts

10. Mount the cold-chamber door remodeled as above to the middle hinge.

11. Mount the left hinge to the left side of the fridge, put the connecting wire

across the upper hinge and insert it into the main control board.

Middle hinge

Left Hinge

(Mount)

Cover board

16

12. Put the upper hinge cover in place.

13. Put the left-top hinge cover board in place.

14. The diagram where the handle is mounted to the right side

(Mount)

Top Hinge Cover

(Mount)

Left-Top Hinge Cover Board

Door opened on the right

Door opened on the left

17

Page is loading ...

LEC TF6020 Owner's manual

LEC TF6020 Owner's manual

Other documents