Berkel X13A Datasheet

Type
Datasheet

Berkel X13A is an automatic gravity feed slicer that offers a range of capabilities for precise and efficient slicing tasks.

Key Features:

  • Sanitary Design: FDA-approved one-piece polymer base and product table for easy cleaning and reduced contamination risk.
  • Removable Sharpener: Submersible table-mounted sharpener with Borazon stones for accurate and consistent knife sharpening.
  • Variable Thickness Control: Variable pitch barrel cam allows for ultra-fine adjustments and precise slice thickness up to 1-5/16" (34mm).
  • Convenient Controls: Index knob and operating controls are positioned outside the drip zone for quick and easy access.

Berkel X13A is an automatic gravity feed slicer that offers a range of capabilities for precise and efficient slicing tasks.

Key Features:

  • Sanitary Design: FDA-approved one-piece polymer base and product table for easy cleaning and reduced contamination risk.
  • Removable Sharpener: Submersible table-mounted sharpener with Borazon stones for accurate and consistent knife sharpening.
  • Variable Thickness Control: Variable pitch barrel cam allows for ultra-fine adjustments and precise slice thickness up to 1-5/16" (34mm).
  • Convenient Controls: Index knob and operating controls are positioned outside the drip zone for quick and easy access.
FF
FF
F
eatureseatures
eatureseatures
eatures
Berkel model X13A automatic gravity feed slicer offers
a number of special features. A sanitary one piece
engineered polymer base and product table reduces
seams and joints while providing an FDA approved
surface for easy, effective cleaning. A removable and
mechanical, gauge plate interlock. Precise thickness
control is achieved using a variable pitch barrel cam for
fine adjustment and wafer thin slices. The index knob
and operating controls are mounted outside of the drip
zone for quick and easy. The slicer can be automatically
operated in 3 speeds, and with 3 different stroke
lengths. A permanent ring guard protects the entire
non-slicing portion of the knife during slicing and
cleaning. A fence is included with the product table. A
simple kick stand supports the slicer for easy access to
clean under the slicer.
AccessoriesAccessories
AccessoriesAccessories
Accessories
! Vegetable chute with pusher
! Skewers with coring tool
! Slaw tray
Standard featuresStandard features
Standard featuresStandard features
Standard features
! 1-speed, 1/2 HP, permanently lubricated ball bearing
knife motor with thermal protection
! Automatic operation in three speeds; 20, 40 or 60
! Three stroke lengths; 1/3, 2/3 and full stroke
! Furnished in 115/60/1, 7 amps, AC, with 3 wire cord
and plug (see below for optional voltages)
! LED indicates power to the slicer
! One-piece FDA polymer base and product table for
reduced seams, accessibility and easy cleaning
! Index knob conveniently located outside the drip zone
in the upper left to provide quick and easy access
! Variable pitch barrel cam for ultra fine, precise slice
adjustment to a thickness of 1-5/16î (34mm)
! 13î (330mm) diameter, hollow ground, hardened and
polished forged stainless steel knife
! Large product table with extra capacity:
" Rectangles up to 10-î x 6-æî (265 mm x 170 mm)
" Squares up to 7-î (190 mm)
" Rounds up to 8-î (220 mm) diameter
! Articulating and full length rear mounted meat pusher
to secure and advance products evenly, fence to hold
product during automatic operation
! Ergonomic, multi-grip handle to advance product table
! Submersible, removable product table mounted
sharpener for consistent sharpening and easy cleaning
!
sharpening and extended life
! No-volt release requires restarting the slicer after a
power interruption
! Permanent ring guard protects entire non-slicing
portion of the knife
! Sealed start/stop switches conveniently located on the
index knob housing out of the food zone
! Mechanical interlock for reliably securing the gauge
plate during cleaning
! Simple kick stand for easy cleaning under the slicer
Item #___________________________________________
Model X13A
Automatic Gravity Feed Slicer
Approved By:Approved By:
Approved By:Approved By:
Approved By:
DateDate
DateDate
Date
BerBer
BerBer
Ber
kk
kk
k
el Companel Compan
el Companel Compan
el Compan
y ï 4406 Ty ï 4406 T
y ï 4406 Ty ï 4406 T
y ï 4406 T
ecec
ecec
ec
hnology Drivhnology Driv
hnology Drivhnology Driv
hnology Driv
e ï South Bend, IN 46628-9e ï South Bend, IN 46628-9
e ï South Bend, IN 46628-9e ï South Bend, IN 46628-9
e ï South Bend, IN 46628-9
700700
700700
700
55
55
5
77
77
7
4-232-8222 ï 800-348-0254-232-8222 ï 800-348-025
4-232-8222 ï 800-348-0254-232-8222 ï 800-348-025
4-232-8222 ï 800-348-025
1 ï F1 ï F
1 ï F1 ï F
1 ï F
AX 888-888-2838 ï wwwAX 888-888-2838 ï www
AX 888-888-2838 ï wwwAX 888-888-2838 ï www
AX 888-888-2838 ï www
.ber.ber
.ber.ber
.ber
kk
kk
k
el.comel.com
el.comel.com
el.com
Form # SPC32-0705N
Power OptionsPower Options
Power OptionsPower Options
Power Options
! 1/2 HP, 220/50/1, 3.5 amps, AC, ETL Listed
! 1/2 HP, 220/60/1, 3.5 amps, AC, ETL Listed
Model X13A
minute
slices/
stones for accurate sharpening. Completely
borazon
submersible table mounted sharpener with
Borazon
sharpening stones for fast, accurate
Manual Gravity Feed Slicer Model X13A
Form #SPC32-0607R
Form # SPC32-0705N © 2005 Berkel Company Litho in USA
SPECIFICSPECIFIC
SPECIFICSPECIFIC
SPECIFIC
AA
AA
A
TIONSTIONS
TIONSTIONS
TIONS
Motors:Motors:
Motors:Motors:
Motors: Knife motor is 1-speed, 1/2hp totally enclosed and
permanently lubricated ball bearings, thermally protected.
Table motor is brushless DC providing three fixed speeds, 20,
40 or 60 slices per minute. Three stroke lengths in the
automatic mode, provide more slices/minute at the same
speed.
Electrical:Electrical:
Electrical:Electrical:
Electrical: Furnished in 115/60/1, 7 amp, AC, ETL Listed,
with 3-wire cord and plug. Power options noted on page 1.
Finish/Construction:Finish/Construction:
Finish/Construction:Finish/Construction:
Finish/Construction: Base, product table, pusher, support
arm and upper housing are constructed of FDA approved,
engineered polymers reducing the number of seams. Gauge
plate and center plate are anodized aluminum. All controls are
sealed and located out of the drip zone.
KnifKnif
KnifKnif
Knif
e:e:
e:e:
e: 13î (330mm) diameter, hollow ground, hardened and
polished stainless steel.
Knife Sharpener:Knife Sharpener:
Knife Sharpener:Knife Sharpener:
Knife Sharpener: Removable and submersible table
mounted, two stone, dual action design to ensure correct
pressure and contact angle are always applied, thus reducing
stones last longer, sharpen faster and clean easier.
Thickness Control:Thickness Control:
Thickness Control:Thickness Control:
Thickness Control: Index knob controls a precision, variable
pitch barrel cam with ultra-fine adjustment in the first revolu-
tion and opens to a thickness of 1-5/16î (34 mm) for accurate
and consistent slicing. This control is located out of the drip
zone on the upper left to provide quick and easy access for
operation and cleaning.
Gauge Plate Interlock:Gauge Plate Interlock:
Gauge Plate Interlock:Gauge Plate Interlock:
Gauge Plate Interlock: Mechanical interlock using twisted
wire, aircraft cables. Table must be in the home position and
gauge plate closed to remove table. Once table is removed, the
gauge plate can not be opened.
Cutting CapacityCutting Capacity
Cutting CapacityCutting Capacity
Cutting Capacity
::
::
: Shown in chart above.
PrPr
PrPr
Pr
oduct Toduct T
oduct Toduct T
oduct T
able:able:
able:able:
able: Full gravity feed 45∞ angle with
articulating rear mounted pusher that runs the entire
length of the table to secure product for increased
yield and consistency in every slice. A fence provides
stability for the product in automatic mode.
KicKic
KicKic
Kic
k Sk S
k Sk S
k S
tand:tand:
tand:tand:
tand: A simple kick stand supports the slicer
for easy access to clean under the slicer.
No-vNo-v
No-vNo-v
No-v
olt Rolt R
olt Rolt R
olt R
elease:elease:
elease:elease:
elease: Requires restarting the slicer in the
event of a power interruption.
Knife Ring Guard:Knife Ring Guard:
Knife Ring Guard:Knife Ring Guard:
Knife Ring Guard: Permanent tapered guard covers
the non-slicing portion of the knife edge.
Controls:Controls:
Controls:Controls:
Controls: Sealed push-button switches located on
the index knob housing out of the drip zone.
WW
WW
W
arrantyarranty
arrantyarranty
arranty
::
::
: Parts, labor and travel coverage for one
year, exclusive of wear items.
BerBer
BerBer
Ber
kk
kk
k
el Companel Compan
el Companel Compan
el Compan
y ï 4406 Ty ï 4406 T
y ï 4406 Ty ï 4406 T
y ï 4406 T
ecec
ecec
ec
hnology Drivhnology Driv
hnology Drivhnology Driv
hnology Driv
e ï South Bend, IN 46628-9e ï South Bend, IN 46628-9
e ï South Bend, IN 46628-9e ï South Bend, IN 46628-9
e ï South Bend, IN 46628-9
700700
700700
700
55
55
5
77
77
7
4-232-8222 ï 800-348-0254-232-8222 ï 800-348-025
4-232-8222 ï 800-348-0254-232-8222 ï 800-348-025
4-232-8222 ï 800-348-025
1 ï F1 ï F
1 ï F1 ï F
1 ï F
AX 888-888-2838 ï wwwAX 888-888-2838 ï www
AX 888-888-2838 ï wwwAX 888-888-2838 ï www
AX 888-888-2838 ï www
.ber.ber
.ber.ber
.ber
kk
kk
k
el.comel.com
el.comel.com
el.com
As we continually strive to improve our products, specifications are
necessarily subject to change without notice.
M
odelModel
ModelModel
Model
C
uttingCutting
CuttingCutting
Cutting
S
liceSlice
SliceSlice
Slice
K
nifeKnife
KnifeKnife
Knife
P
roduct DimensionsProduct Dimensions
Product DimensionsProduct Dimensions
Product Dimensions
No.No.
No.No.
No.
CapacityCapacity
CapacityCapacity
Capacity
ThicknessThickness
ThicknessThickness
Thickness
Dia.Dia.
Dia.Dia.
Dia.
Width AWidth A
Width AWidth A
Width A
Depth BDepth B
Depth BDepth B
Depth B
Height CHeight C
Height CHeight C
Height C
X13
Rect. 10-1/2î x 6-3/4î (265 x 170 mm) 1-5/16î 13î 28î 29î 25î
Square 7-1/2î (190 mm) (34 mm) (330 mm) (710 mm) (735 mm) (635 mm)
Round 8-1/2î (220 mm)
MotorMotor
MotorMotor
Motor
ElectricalElectrical
ElectricalElectrical
Electrical
WeightWeight
WeightWeight
Weight
Box DimensionsBox Dimensions
Box DimensionsBox Dimensions
Box Dimensions
WidthWidth
WidthWidth
Width
DepthDepth
DepthDepth
Depth
HeightHeight
HeightHeight
Height
1-speed 115/60/1 Net 98 lb (44 kg) 26-1/2î 31î 25-1/2î
1/2 HP 7 amps Ship 128 lb (58 kg) (675 mm) (780 mm) (650 mm)
Automatic Gravity Feed Slicer
A
B
C
Model X13A
A
knife wear and delivering a perfect edge.
Borazon
Manual Gravity Feed Slicer Model X13A
F
or
m #SPC32-0607R
  • Page 1 1
  • Page 2 2

Berkel X13A Datasheet

Type
Datasheet

Berkel X13A is an automatic gravity feed slicer that offers a range of capabilities for precise and efficient slicing tasks.

Key Features:

  • Sanitary Design: FDA-approved one-piece polymer base and product table for easy cleaning and reduced contamination risk.
  • Removable Sharpener: Submersible table-mounted sharpener with Borazon stones for accurate and consistent knife sharpening.
  • Variable Thickness Control: Variable pitch barrel cam allows for ultra-fine adjustments and precise slice thickness up to 1-5/16" (34mm).
  • Convenient Controls: Index knob and operating controls are positioned outside the drip zone for quick and easy access.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI